BNC75-BJ-2.5C2W-CR1-CF [DDK]
75 Ω BNC Style Connector;型号: | BNC75-BJ-2.5C2W-CR1-CF |
厂家: | DDK LTD. |
描述: | 75 Ω BNC Style Connector |
文件: | 总9页 (文件大小:265K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
75 Ω BNC Style Connector
BNC75 Series
FEATURE
・75 Ω of BNC style connector
Frequency
Range
・BNC style connectors can be mated.
・Bayonet coupling mechanism for reliable
connection.
Characteristic
Impedance
75 Ω
Lock Type
Bayonet
APPLICATIONS
Measurement Equipment, Broadcasting, HDTV
SPECIFICATIONS
Characteristic Impedance
Rated Voltage
ꢀ75 Ω
500VAC(r.m.s.)
Dielectric Withstanding Voltage 1500V AC(r.m.s.)for1 minute
Insulation Resistance
Contact Resistance
V.S.W.R.
1000M Ω Mim. at 500V DC
3m Ω Max.
1.3 max. at DC to 1GHz
-55 〜 +85℃
Operating Temperature
* The specifications are typical but may not apply to all connectors. Please check ꢀ
the specifications on each item with its drawing from us when you use.
RRooHHSS
MATERIAL/FINISH
CCoommpplliiaanntt
Item
Material / Finish
Copper Alloy / Ni or Ag Plating
Copper Alloy / Ag or Au Plating
Shell (Body)
Contact (Male)
Contact (Female) Copper Alloy / Ag or Au Plating
Insulator
Gasket
PTFE
Silicon Rubber
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
170605
http://www.ddknet.co.jp
BNC75ꢀSeries
Unit:mm
○ Straight Cable Plug
Finish
Outer
Conductor Conductor
Applicable
Cable
Assembly
Insutruction
Part Number
Crimp Tool
φA
Center
1.5C-2W
1.5C-QEW
2.5C-XW
2.5C-2W
3C-2W
BNC75-P-1.5CQEW-CF
5.50
6.25
7.90
Ni
Ni
Ni
Au
Au
Au
CR-H-1100
CR-H-1105
CR-H-1132
26.3
BNC75-P-2.5CW-CR10B-CF
BNC75-P-3CW-CR10B-CF
1
1
3C-2WS
Finish
Applicable
Cable
Assembly
Instruction
Part Number
φA
6.5
Outer
Center
Conductor Conductor
BNC75-SP-3C2V-CR1-DA1
3C-2V
Ni
Au
29
Finish
Center
Conductor Conductor
Applicable
Cable
Assembly
Instruction
Part Number
φA
Outer
BNC75-P-5-CF
5C-2V
5C-2W
5C-FB
37
37
39
Ag
Ag
Ag
Ag
BNC75-P-5C2W-CF
BNC75-SP-5CFB-CF
Ni
3
A
Ni
Finish
Outer
Conductor Conductor
Assembly
Instruction
Part Number
Applicable Cable
1.5CCA-EXBV
Crimp Tool
CR-H-1101
Center
BNC75-SP-1.5CCA-EXBV-CF
Ni Au
30
○ Straight Cable Jack
Finish
Assembly
Instruction
Part Number
Applicable Cable
Crimp Tool
CR-H-1105
Outer
Center
Conductor Conductor
2.5C-XW
2.5C-2W
BNC75-J-2.5C2W-CR10A-CF
Ni Au
32.5
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
2
BNC75ꢀSeries
○ Straight Bulkhead Cable Jack
Finish
Center
Conductor Conductor
Applicable
Cable
Assembly
Instruction
Part Number
Crimp Tool
Outer
2.5C-2W
BNC75-BJ-2.5C2W-CR1-CF
Ni
Au
2.5C-QEW
2
18
33.2
○Straight Panel Cable Jack
Finish
Applicable
Cable
Assembly
Instruction
Crimp
Tool
Part Number
φA
L
Outer
Center
ConductorConductor
BNC75-PJ-3CW-CR10B-CF
BNC75-PJ-3C2V-CR1-CF
3C-2WS 11.8 32.6
Ni
Au
4
CR-H-1132
3C-2V
11.3 30.0
Ni
Au
CR-H-16776
4-φ3.1
+0.1
0
4-φ3.1
+0.1
0
φA
2.3
14.0
12.7
17.5
±0.05
12.7
L
Panel Mounting Dimensions
Finish
Outer
Conductor Conductor
Applicable
Cable
Assembly
Instruction
Part Number
Crimp Tool
L
Center
BNC75-PJ-1.5CCA-EXBV-CF 1.5CCA-EXBV 34.5
1.5C-2V
Ni
Ni
Ni
Au
Au
Ag
CR-H-1101
CR-H-1101
CR-H-1100
BNC75-PJ-1.5CV-CR2-CF
33.0
1.5C-QEV
2.5C-2V
BNC75-PJ-2.5V-CR-Ni-CF
34.5
+0.1
0
4-φ3
4-φ3.1
+0.1
0
φ11.5
2.3
15.8
12.7
17.5
±0.05
12.7
L
Panel Mounting Dimensions
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
3
BNC75ꢀSeries
Unit:mm
○ Receptacle Jack
Finish
Part Number
BNC75-R-A-CF
Outer
Center
Conductor
Ni
Conductor
Au
4-φ3.1
+0.1
0
4-φ3.0
+0.1
0
φ9.0
2.3
15.8
26.3
12.7
17.5
±0.05
12.7
Panel Mounting Dimensions
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
4
BNC75ꢀSeries
○Assembly Instruction(1)
Parts Configulration
Heat-shrinkable tube
Ferule
Sleeve
Contact
Insulator
Body
Cable
15
① Insert the heat-shrinkable tube into the cable
and cut the cable as fig.1. Please be carefule to
not damage the outer conductor.
①
Outer Conductor
Sheath
Heat-shrinkable tube
Insulator
Ferule
Insert the ferule from the end of outer
conductor to the sheath.
②
②
Spread the top of outer conductor and insert the
sleeve between insulator and outer conductor.
To push the sleeve into the cable, please refer to
Sleeve
the tool as fig.2. And cut the outer conductor
along the sleeve.
Inserting Too for Sleeve
20 min.
Push into sleeve
on this side
7.2 3.5
Insulator
③ Cut the insulator and center conductor as fig.3.
Cut the center conductor after pre-soldering.
③
④
Center Conductor
(Pre-soldering)
Insulator
Soldering
④ Insert the insulator and solder the center
conductor and contact. Pre-solder the contact.
Shave the extra solder from the contact along the
round of contact.
Contact
No gap
Insulator
. And insert the
⑤ Inser above cable into the body
contact.
⑤
as fig.6.
⑥ Crimping position is
Part Number
⑥
⑦
Crimp Tool
CR-H-1105
CR-H-1132
BNC75-P-2.5CW-CR10B-CF
BNC75-P-3CW-CR10B-CF
⑦ Cover the heat-shrinkable tube on the root of
the connector body and heat up the tube.
Heat-shrinkable tube
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
5
BNC75ꢀSeries
Unit:mm
○Assembly Instruction(2)
Parts Configulration
Ferule
Sleeve
Contact
Boot
Body
The cable length require for the double-ended cable
assembly.
L-12mm
L
①
②
cut the cable
as fig.1. Please be carefule to not damage the outer
conductor.
① Insert the boot into the cable and
15
Cable
Outer Conductor
Sheath
Boot
Ferule
② Insert the ferule toward outer conductor.
Spread the outer conductor and press in the
sleeve with stripper (P/N:89134).
Sleeve
Insulator
Pull out the edge
Strippe(r P/N:89134)
③ Cut the extra outer conductor and insulator
from the stripper along the surface as fig.3.
③
Center Conductor
Cut the insulator and center conductor
along this side
④ Push the edge of the stripper and rotate.
Separate the insulator toward the arrow.
④
ꢀCut the outer conductor along the surface of sleeve.
Cut off the outer conductor
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
6
BNC75ꢀSeries
○ Assembly Instruction(2)
⑤
⑤ Pinch the contact in the crimping hole(center
and insert the center conductor of the cable.
Crimping Hole
hole)
Crimp Tool
Crimp the contact (match the side hole of contact
with the curve of crimping hole of tool.)
Insulator
Center Conductor
Contact
3.4
4.8
Crimp Tool
Crimped
Body
⑥ Insert the above contact into the body until
the top of the contact is same level of the top
of insulator.
⑥
⑦
Push the crimp tool into
the root of body.
Please do not rotate the body and cable
before crimping.
ꢀCrimp the root of the body as fig.6.
Crimp Position
on the body.
⑦ Cover the boot
Boot
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
7
BNC75ꢀSeries
Unit:mm
○ Assembly Instruction(3)
Parts Configulration
Nut
Washer
Gasket
Clamp
Male Contact
Plug Shell
15
①
① Cut the cable as fig.1
Please be carefule to not damage the outer
conductor.
as
② Insert the nut, washer, gasket and clamp
②
③
fig.2. The clamp is holded on the sheath and pick
the outer conductor.
③ Cut the insulator and center conductor.
ꢀTurn down the outer conductor to the clamp and cut
the outer conductor along the clamp. Cut the
insulator and center conductor as fig.3.
Please be careful to not damage the center
conductor.
3
6
④
⑤
④ Solder up the contact to the center conductor.
Please be careful to not be swelled up the solder.
Please be careful to not gap between contact and
insulator.
Please be careful to not deform the insulator by
soldering.
⑤ Inser the above contact into the body and
screw up the nut.
Please screw up the nut by wrench.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
8
BNC75ꢀSeries
○ Assembly Instruction(4)
Parts Configulration
Heat-shrinkable tube Ferule
Sleeve
Insulator
Contact
Body
①
20
① Insert the heat-shrinkable tube into the cable
.
and cut the cable as fig.1
Outer Conductor
Center Conductor
Sheath
Heat-shrinkable tube
②
3.5
A
② Insert the ferule on the outer conductor.
ꢀ Pick the outer conductor and spread the top of center
conductor. Insert the insulator from the outer conductor.
Cut the extra outer conductor along the sleeve.
ꢀ Cut the insulator in length A. Cut the center conductor
after pre-soldering.
Cut off extra outer conductor
Insulator
Ferule
Sleeve
Part Number
A
BNC75-J-2.5C2W-CR10A-CF
BNC75-PJ-3CW-CR10B-CF
7.2mm
6.8mm
③
Insulator
Soldering
Contact
③ Insert the insulator and solder the contact.
④
Crimp Tool
and crimp
④ Insert the above contact into the body
the body as fig.4.
Part Number
Crimp Tool
BNC75-J-2.5C2W-CR10A-CF
BNC75-PJ-3CW-CR10B-CF
CR-H-1105
CR-H-1132
Same level
Body
⑤
⑤ Cover the heat-shrinkable tube on the root of
the connector body and heat up the tube.
Heat-shrinkable tube
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
ꢀMoreover, the characteristic and the specification of the published product are the reference values.
ꢀPlease confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
9
相关型号:
©2020 ICPDF网 联系我们和版权申明