CYV15G0102EQ-SXC [CYPRESS]
Multi-Rate Video Cable Equalizer; 多码率视频电缆均衡器型号: | CYV15G0102EQ-SXC |
厂家: | CYPRESS |
描述: | Multi-Rate Video Cable Equalizer |
文件: | 总10页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY
CYV15G0102EQ
Multi-Rate Video Cable Equalizer
Features
Functional Description
• Multi-Rate Adaptive Equalization
The CYV15G0102EQ is a multi-rate adaptive equalizer
designed to equalize and restore signals received over 75Ω
coaxial cable. The equalizer is designed to meet SMPTE
292M, SMPTE 344M, and SMPTE 259M data rates. The
CYV15G0102EQ is optimized to equalize up to 400m of
Belden 1694A coaxial cable at 270 Mbps and up to 200m of
Belden 1694A coaxial cable at 1.485 Gbps. The
CYV15G0102EQ connects seamlessly to the HOTLink II
family of transceiver devices.
• SMPTE 292M, SMPTE 344M, and SMPTE 259M
Compliant
• Supports DVB-ASI at 270 Mbps
• Cable Length Indicator for HD-SDI and SD-SDI data
rates
• Maximum Cable Length Adjustment for HD-SDI and
SD-SDI data rates
The CYV15G0102EQ has DC restoration for compensation of
the DC content of the SMPTE pathological patterns. A cable
length indicator (CLI) provides an indication of the cable length
being equalized at HD-SDI and SD-SDI data rates. The
Maximum cable length adjust (MCLADJ) sets the approximate
maximum cable length to be equalized at SD and HD data
rates. The CYV15G0102EQ’s differential serial outputs (SDO,
SDO) mute, when the approximate cable length set by
MCLADJ is reached. CD/MUTE is a bidirectional pin that
provides an indication of the signal being present at the
equalizer inputs. It also controls muting the outputs of the
equalizer at HD and SD data rates.
• Carrier detect and Mute functionality for HD-SDI and
SD-SDI data rates
• Equalizer Bypass Mode
• Seamless connection with HOTLink II™ Family
• Equalizes up to 400m of Belden 1694A coaxial cable at
270 Mbps
• Equalizes up to 200m of Belden 1694A coaxial cable at
1.485 Gbps
• Low Power 160 mW @ 3.3V
• Single 3.3V supply
Power consumption is typically 160 mW at 3.3V.
• 16-pin SOIC
• 0.18-µm CMOS technology
• Pb-free and RoHS compliant
• Pin-compatible to existing equalizer devices
Equalizer System Connection Diagram
CYV15G0102EQ
Multi-Rate
Cable
Serial Links
HOTLink II
Serializer
Cable
Driver
HOTLink II
Deserializer
Copper Cable
Connections
Equalizer
Cypress Semiconductor Corporation
Document #: 001-04205 Rev. *A
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised August 30, 2005
PRELIMINARY
CYV15G0102EQ
Equalizer Block Diagram
CYV15G0102EQ Multi-Rate Video Cable Equalizer Block Diagram
CYV15G0102EQ Multi-Rate Video Cable Equalizer Block Diagram
Cable Length Analog
Carrier Detect and Mute
Indicator and Mute
Control Block
CLI
CD / MUTE
MCLADJ
Threshold Block
DC Restore
BYPASS
SDI, SDI
Equalizer
Differential Output
SDO, SDO
Pin Configuration (Top View)
16-PIN SOIC Top View
16
15
CD/MUTE
VCC
CLI
2
VCC
GND
3
4
14
13
GND
SDO
SDI
SDI
CYV15G0102EQ
5
6
12
11
SDO
GND
GND
AGC+
AGC-
7
8
MCLADJ
BYPASS
10
9
Document #: 001-04205 Rev. *A
Page 2 of 10
PRELIMINARY
CYV15G0102EQ
Pin Descriptions
CYV15G0102EQ Single Channel Cable Equalizer
Name
I/OCharacteristics Signal Description
Control Signals
CLI
Analog Output
LVTTL I/O
Cable Length Indicator: CLI provides an analog voltage proportional to the cable
length being equalized. CLI works at both SD-SDI and HD-SDI data rates.
CD/MUTE
Carrier Detect/Mute Indicator:
Output:
When the incoming data stream is present, the CD/MUTE outputs a voltage less than
0.8V.
When the incoming data stream is not present, the CD/MUTE outputs a voltage
greater than 3V.
Input:
When the CD/MUTE pin is tied to ground, the equalizer’s differential serial outputs
are not muted and the MCLADJ setting is overwritten.
When the CD/MUTE pin is tied to VCC, the equalizer’s differential serial outputs are
muted and the MCLADJ setting is overwritten.
MCLADJ
BYPASS
Analog Input
LVTTL Input
Maximum Cable Length Adjust: The maximum cable length to be equalized is set
by the voltage applied to the MCLADJ input. When the maximum cable length set by
MCLADJ is reached, the differential output is muted. MCLADJ works at both SD and
HD data rates.
Equalizer Bypass: When BYPASS is tied to VCC, the signal presented at the
equalizer’s differential serial inputs (SDI, SDI) is routed to the equalizer’s differential
serial outputs (SDO, SDO) without performing equalization.
When BYPASS is tied to GND, the incoming video data stream is equalized and
presented at the equalizer‘s serial differential outputs (SDO, SDO).
In equalizer bypass mode, CD/MUTE is not functional.
AGC±
Analog
Automatic Gain Control: A capacitor of 1 µF should be placed between the AGC±
pins.
SDO, SDO
SDI, SDI
Differential
Output
Differential Serial Outputs: The equalized serial video data stream is presented at
the SDO/SDO differential serial CML output.
Differential
Input
Differential Serial Inputs: SDI/SDI can accept either a single ended or differential
serial video data stream over 75Ω coaxial cable.
Power
VCC
Power
Gnd
+3.3V Power.
GND
Connect to Ground.
by RP178. The CYV15G0102EQ multi-rate Cable Equalizer is
auto-adaptive from 143 Mbps to 1.485 Gbps.
Equalizer Operation
The CYV15G0102EQ is
a high-speed adaptive cable
The CYV15G0102EQ equalizer has variable gain, multiple
equalization stages, that reverse the effects of the cable. This
equalization is achieved by separate regulation of the lower
and higher frequency components in the signal to give a clean
eye. The CYV15G0102EQ has DC restoration for compen-
sating the DC content of the SMPTE pathological patterns.
equalizer designed to equalize standard definition (SD) and
high definition (HD) serial digital interface (SDI) video data
streams. CYV15G0102EQ equalizer is optimized to equalize
up to 400m of Belden 1694A cable at 270 Mbps and up to
200m of Belden 1694A cable at 1.485 Gbps. The
CYV15G0102EQ equalizer contains one power supply and
typically consumes 160 mW power at 3.3V. The multi-rate
equalizer is designed to meet the SMPTE 259M, SMPTE
292M, SMPTE 344M and DVB-ASI video standards. The
equalizer meets all pathological requirements for SMPTE
292M as defined by RP198. and for SMPTE 259M as defined
SDI, SDI
CYV15G0102EQ accepts single-ended or differential serial
video data streams over 75Ω coaxial cable. It is recommended
to AC-couple the SDI, SDI inputs as they are internally biased
to 1.2V.
Document #: 001-04205 Rev. *A
Page 3 of 10
PRELIMINARY
CYV15G0102EQ
equalizer’s input, or it controls the muting of the equalizer’s
output. The (CD/MUTE) operates for both HD and SD data
rates.
SDO, SDO
The CYV15G0102EQ has differential serial output interface
drivers that use current mode logic [CML] drivers to provide
source matching for the transmission line. These outputs can
be either AC coupled or DC coupled to HOTLink II SerDes
device.
If CD/MUTE is used as an output, and the incoming data
stream is not present, the voltage at the CD/MUTE output will
be greater than 3.0V. If CD/MUTE is used as an output, and
the incoming data stream is present, then the voltage at the
CD/MUTE output will be less than 0.8V.
CLI
If CD/MUTE is used as an input, and tied to ground, the
equalizer serial outputs are not muted and the MCLADJ
setting is overwritten. If the CD/MUTE is used as an input and
is tied to VCC, then the equalizer serial outputs are muted and
the MCLADJ setting is overwritten.
Cable Length Indicator (CLI) is an analog output that gives an
output voltage proportional to the cable length being
equalized. CLI gives an approximation of the length of cable
at the differential serial inputs (SDI, SDI). CLI works at high
definition (HD) data rates as well as standard definition (SD)
data rates. The graph in Figure 2 illustrates the CLI output
voltage at various Belden 1694A cable lengths. With an
increase in cable length, CLI output voltage decreases.
When an invalid signal or a signal transmitted with a launch
amplitude of less than 500 mV at HD data-rates is received,
the equalizer’s serial outputs are muted and the MCLADJ
setting is overwritten.
MCLADJ
BYPASS
Maximum Cable Length Adjust (MCLADJ) sets the approx-
imate maximum amount of cable to be equalized. When the
maximum cable length set by MCLADJ is reached, the outputs
are muted. MCLADJ works at SD as well HD data rates.
The CYV15G0102EQ has a bypass mode that allows the user
to bypass the equalizer’s equalization and DC restoration
functions. When the Bypass mode is tied to VCC, the signal
presented at the equalizer’s differential serial inputs (SDI, SDI)
is routed to the equalizer’s differential serial outputs (SDO,
SDO) without performing equalization.
If the MCLADJ voltage is greater than the CLI output voltage,
the equalizer serial differential outputs (SDO, SDO) are muted.
If the MCLADJ voltage is less than CLI voltage, then the
equalizer’s differential serial outputs (SDO, SDO) are not
muted and the incoming data stream is equalized. The graph
in Figure 1 illustrates the voltage needed at MCLADJ input, to
equalize various Belden 1694A cable lengths for SD and HD
data rates. The MCLADJ pin can be left unconnected in appli-
cations that do not require muting of the outputs.
When BYPASS is tied to GND, the incoming video data stream
is equalized and presented at the equalizer‘s differential serial
outputs (SDO, SDO).
In equalizer bypass mode, CD/MUTE is not functional.
AGC
A capacitor of 1 µF should be placed between the AGC± pins
of the CYV15G0102EQ equalizer.
CD/MUTE
Carrier Detect/MUTE (CD/MUTE) is a bidirectional pin that
provides an indication of the signal being present at the
Document #: 001-04205 Rev. *A
Page 4 of 10
PRELIMINARY
CYV15G0102EQ
Power-up Requirements
Maximum Ratings
The CYV15G0102EQ contains one power-supply. The voltage
on any input or I/O pin cannot exceed the power pin during
power-up.
Above which the useful life may be impaired. User guidelines
only, not tested
Storage Temperature ..................................–65°C to +150°C
Operating Range
Ambient Temperature with
Power Applied.............................................–55°C to +125°C
Ambient
Temperature
Range
VCC
Supply Voltage to Ground Potential............... –0.5V to +3.8V
Commercial
0°C to +40°C
+3.3V ±5%
DC Voltage Applied to Outputs
in High-Z State .......................................–0.5V to VCC + 0.5V
DC Input Voltage......................................–0.5V to VCC+0.5V
Electro Static Discharge (ESD) HBM.......................> 2000 V
(per JEDEC EIA/JESD-A114A)
Latch-Up Current ....................................................> 200 mA
DC Electrical Characteristics
Parameter
VCC
Description
Supply Voltage[1]
Power Consumption[2]
Supply Current[1]
Output Common Mode Voltage[1]
Input Common Mode Voltage[1]
[Bypass = High]
Test Conditions
Min.
Typ.
Max.
3.465
190
58
Unit
V
–
3.135
125
38
3.3
PD
–
160
48
mW
mA
V
IS
–
VCMOUT
VCMIN
Load = 50Ω
–
VCC – ∆VSDO/2
1.24
–
–
1
1.4
V
Input Common Mode Voltage[1]
[Bypass = Low]
–
0
1.24
2.9
V
–
–
–
–
CLI DC Voltage (0m)[1]
–
2.5
1.6
1.2
0.55
3.0
–
2.65
1.9
1.3
0.72
–
2.9
2.3
1.4
1.02
–
V
V
V
V
V
V
V
CLI DC Voltage (no signal)[1]
Floating MCLADJ DC Voltage[1]
MCLADJ Range[1]
–
–
–
VCD/MUTE(OH) CD/MUTE Output Voltage[1]
Carrier Not Present
Carrier Present
Min. to Mute
VCD/MUTE(OL)
–
0.8
–
VCD/MUTE
VCD/MUTE
CD/MUTE Input Voltage Required to
Force Outputs to Mute[1]
2.2
–
CD/MUTE Input Voltage Required to
Force Active[1]
Max. to Activate
–
–
1.2
V
Notes:
1. Production test.
2. Calculated results from production test.
Document #: 001-04205 Rev. *A
Page 5 of 10
PRELIMINARY
CYV15G0102EQ
AC Electrical Characteristics
Parameter
Description
Serial Input Data Rate[1]
Input Voltage Swing
Test Conditions
Min.
143
500
Typ.
–
800[1]
Max.
1485
1200
Unit
Mbps
mV
–
–
VSDI
Singleended, atthetransmitter,
HD data rate
VSDI
Input Voltage Swing
Singleended, atthetransmitter,
SD data rate
620
800[1]
1200
mV
∆VSDO
Output Voltage Swing[1]
Differentialp-p,50Ω load
650
–
800
400
900
–
mV
m
–
Maximum Equalized Cable
Length[1]
270 Mbps, Belden 1694A,
800 mV transmit amplitude,
equalizer pathological pattern,
0.2 UI equalizer output jitter
1.485 Gbps, Belden 1694A,
800 mV transmit amplitude,
equalizer pathological pattern,
0.3 UI equalizer output jitter
–
200
–
m
–
–
–
–
–
–
–
Output Rise/Fall Time[3, 4]
Mismatch in Rise/Fall time[3, 4]
Duty cycle distortion[3, 4]
Overshoot[3, 4]
20% - 80%
80
–
120
–
220
30
30
10
–
ps
ps
ps
%
–
–
–
–
–
–
–
Input Return Loss[3]
–
15
–
–
dB
kΩ
pF
Ω
Input Resistance[3, 4]
Input Capacitance[3, 4]
Output Resistance[3, 4]
Single ended
Single ended
Single ended
2.5
1
–
–
–
–
–
50
–
Notes:
3. Not tested. Based on characterization.
4. Not tested. Guaranteed by design simulations.
Document #: 001-04205 Rev. *A
Page 6 of 10
PRELIMINARY
CYV15G0102EQ
Typical Performance Graphs
(Unless Otherwise mentioned, VCC = 3.3V, TA = 25°C)
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2
1.9
1.8
1.7
0
50
100
150
200
250
300
350
400
CABLE LENGTH (m)
Figure 1. MCLADJ Input Voltage Vs. Belden 1694A Cable Length at SD-SDI and HD-SDI Data Rates
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2
1.9
1.8
1.7
0
50
100
150
200
250
300
350
400
CABLE LENGTH (m)
Figure 2. CLI Output Voltage Vs. Belden 1694A Cable Length at SD-SDI and HD-SDI Data Rates
Document #: 001-04205 Rev. *A
Page 7 of 10
PRELIMINARY
CYV15G0102EQ
Typical Application Circuit
C L I
C12
+3.3V
C D / M U T E
+3.3V
C10
0. 01 µF
1 µF
LFI
RXLE
SDASEL
LPEN
BNC JACK
0.01 µF
R16
RXD7
C15
C16
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
RXD6
CLI
VCC
VEE
SDI
75Ω
CD / MUTE
VCC
RXD5
INSEL
Z0
Z0
RXD4
75 Ω
VEE
IN1+
1 µF
RXD3
L2
SDO
2 Z0
R18
RXD2
SDO
SDI
RXD1
IN1−
VEE
VEE
6.4 n H
RXD0
AGC+
MCLADJ
FRAMCHAR
RFEN
RFMODE
DECMODE
RXCKSEL
RXMODE
RXRATE
RXOP
RXST2
RXST1
RXST0
RXCLK+
RXCLK−
RXCLKC+
BYPASSAGC−
+
37.4 Ω
1 µF
75Ω
R15 R14
CYV15G0102EQ
C11
CYV15G0101DXB
MC L A D J
Figure 3. Interfacing CYV15G0102EQ to the HOTLink II SerDes
Ordering Information
Operating
Range
Ordering Code
Package Name
Package Type
CYV15G0102EQ-SXC
SZ16.15
Pb-Free16-lead 150-mil SOIC
0 to 40°C
Document #: 001-04205 Rev. *A
Page 8 of 10
PRELIMINARY
CYV15G0102EQ
Package Dimensions
16-Lead (150-Mil) SOIC S16.15
0). ꢀ )$
ꢂ
ꢀ
$)-%.3)/.3 ). ).#(%3;--= -).ꢅ
-!8ꢅ
2%&%2%.#% *%$%# -3ꢋꢁꢀꢆ
0!#+!'% 7%)'(4 ꢁꢅꢀꢈGMS
ꢁꢅꢀꢈꢁ;ꢇꢅꢂꢀꢁ=
ꢁꢅꢀꢈꢊ;ꢇꢅꢃꢂꢊ=
ꢁꢅꢆꢇꢁ;ꢈꢅꢂꢉꢆ=
ꢁꢅꢆꢉꢉ;ꢄꢅꢀꢃꢊ=
0!24 ꢌ
3ꢀꢄꢅꢀꢈ
34!.$!2$ 0+'ꢅ
3:ꢀꢄꢅꢀꢈ ,%!$ &2%% 0+'ꢅ
ꢃ
ꢀꢄ
ꢁꢅꢁꢀꢁ;ꢁꢅꢆꢈꢉ=
ꢁꢅꢁꢀꢄ;ꢁꢅꢉꢁꢄ=
8 ꢉꢈ²
ꢁꢅꢇꢂꢄ;ꢃꢅꢂꢁꢉ=
ꢁꢅꢇꢃꢇ;ꢃꢅꢃꢂꢆ=
3%!4).' 0,!.%
ꢁꢅꢁꢄꢀ;ꢀꢅꢈꢉꢃ=
ꢁꢅꢁꢄꢂ;ꢀꢅꢊꢆꢊ=
ꢁꢅꢁꢁꢉ;ꢁꢅꢀꢁꢆ=
ꢁꢅꢁꢈꢁ;ꢀꢅꢆꢊꢁ=
ꢁꢅꢁꢁꢊꢈ;ꢁꢅꢀꢃꢁ=
ꢁꢅꢁꢁꢃꢂ;ꢁꢅꢆꢉꢃ=
ꢁꢅꢁꢀꢄ;ꢁꢅꢉꢁꢄ=
ꢁꢅꢁꢇꢈ;ꢁꢅꢂꢂꢃ=
"3#
ꢁ²^ꢂ²
ꢁꢅꢁꢀꢇꢂ;ꢁꢅꢇꢈꢁ=
ꢁꢅꢁꢁꢉ;ꢁꢅꢀꢁꢆ=
ꢁꢅꢁꢁꢃꢂ;ꢁꢅꢆꢉꢃ=
ꢁꢅꢁꢀꢃꢆ;ꢁꢅꢉꢂꢊ=
51-85068-*B
HOTLink II is a trademark of Cypress Semiconductor. All product and company names mentioned in this document may be the
trademarks of their respective holders.
Document #: 001-04205 Rev. *A
Page 9 of 10
© Cypress Semiconductor Corporation, 2005. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
PRELIMINARY
CYV15G0102EQ
Document History Page
Document Title: CYV15G0102EQ Multi-Rate Cable Equalizer
Document Number: 001-04205
ISSUE
DATE
ORIG. OF
CHANGE
REV.
**
ECN NO.
389196
394763
DESCRIPTION OF CHANGE
New Preliminary Data Sheet
Updated Preliminary Data Sheet for release to the internet
SEE ECN
SEE ECN
BCD
BCD
*A
Document #: 001-04205 Rev. *A
Page 10 of 10
相关型号:
©2020 ICPDF网 联系我们和版权申明