CY8CTMA616AE-13T [CYPRESS]
Analog Circuit, 1 Func, CMOS, PQFP100, TQFP-100;
| 型号： | CY8CTMA616AE-13T |
| 厂家： | 
CYPRESS |
| 描述： | Analog Circuit, 1 Func, CMOS, PQFP100, TQFP-100 |
| 文件： | 总3页 (文件大小：124K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CY8CTMA884
CY8CTMA616
SUMMARY
Automotive TrueTouch® Multi-Touch
All-Points Touchscreen Controller
General Description
CY8CTMA884/CY8CTMA616 is a single-chip solution for touchscreen applications. It delivers up to 884-node, high-performance,
mutual-capacitive sensing for screen sizes of 5.5-inch to 11.6-inch designs. It employs TrueTouch® Multi-Touch All-Points sensing to
track up to 10 fingers simultaneously with no ghosting, and delivers up to 100-Hz refresh rate with 0.5-mm accuracy.
■ Advanced capabilities
Features
❐ In-system configuration updates through I2C
■ Automotive Electronics Council (AEC) Q100 qualified
❐ Programmable power modes: Active (91 mW), Low Power
(52 mW), and Deep Sleep (58 µW)
❐ On-chip gesture support
❐ Water rejection
■ TrueTouch capacitive touchscreen controller
❐ High-performance single-chip mutual-capacitance sensing
❐ Up to 100-Hz single-finger refresh rate
❐ Scan rate versus signal-to-noise ratio (SNR) trade-off for op-
■ Signal processing
❐ Advanced analog and digital filtering
❐ Self-calibration
❐ Large object rejection and suppression
❐ EMI immunity
timum system performance design
❐ TrueTouch Multi-Touch All-Points sensing with up to 884
sense nodes
❐ Screen sizes up to 11.6 inches
❐ 10-finger simultaneous multi-touch tracking
❐ 0.5-mm accuracy
❐ 12-mm finger separation with 9-mm fingers
❐ Supports up to 26 capacitive buttons
■ Communication interface
❐ I2C
❐ Dedicated bidirectional interrupt line
■ Package options
■ Number of channels
❐ 100-pin TQFP, 14 × 14 × 1.4 mm, 0.5-mm pin-pitch
❐ Supports up to 60/50 sensor-driving I/Os: flexible configura-
tion of column sensors, row sensors, and capacitive buttons
■ Temperature ranges
❐ Automotive A: –40 °C to 85 °C
❐ Automotive E: –40 °C to 125 °C
❐ Supports typical sensor grid configuration
• Up to 36 columns and up to 26 rows (max of 884 sense
nodes with 34 columns and 26 rows) for TMA884
• Up to 34 columns and up to 22 rows (max of 616 sense
nodes with 28 columns and 22 rows) for TMA616
Cypress Semiconductor Corporation
Document Number: 001-94114 Rev. *A
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised September 22, 2017
CY8CTMA884
CY8CTMA616
SUMMARY
Ordering Information
Max
Sensing
I/O
Maximum Boot-
Water
Capacitive
Buttons
Part Number
I2C
Gestures
Description
Fingers
loader Rejection
CY8CTMA616AA-12 (T)
CY8CTMA616AA-13 (T)
CY8CTMA616AE-12 (T)
CY8CTMA616AE-13 (T)
CY8CTMA884AA-12 (T)
CY8CTMA884AA-13 (T)
CY8CTMA884AE-12 (T)
CY8CTMA884AE-13 (T)
CY8CTMA616AA-22 (T)
CY8CTMA616AA-23 (T)
CY8CTMA616AE-22 (T)
CY8CTMA616AE-23 (T)
CY8CTMA884AA-22 (T)
CY8CTMA884AA-23 (T)
CY8CTMA884AE-22 (T)
CY8CTMA884AE-23 (T)
50
50
50
50
60
60
60
60
50
50
50
50
60
60
60
60
4
10
4
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✕
✕
✕
✕
✕
✕
✕
✕
✔
✔
✔
✔
✔
✔
✔
✔
✕
✕
✕
✕
✕
✕
✕
✕
✔
✔
✔
✔
✔
✔
✔
✔
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
100-pin TQFP
10
4
10
4
10
4
10
4
10
4
10
4
10
Ordering Code Definitions
CY TMA XXX
8
C
X
X - X
X X
X = blank or T
blank = Tray; T = Tape and Reel
Maximum Finger Code: X = 2 or 3
2 = 4 Finger; 3 = 10 Finger
Feature Set Code: X = 1 or 2
1 = Base; 2 = Plus
Qualification and Temperature Range: X = A or E
A = Automotive-qualified = –40 °C < TA < +85 °C;
E = Automotive-qualified = –40 °C < TA < +125 °C
Package Type:
A = 100-pin TQFP
Sub-family Code: XXX = 616 or 884
616 = 50 I/O; 884 = 60 I/O
Family Code: TMA = Multi-Touch All Point Controller
Technology Code: C = CMOS
Marketing Code: 8 = PSoC
Company ID: CY = Cypress
Document Number: 001-94114 Rev. *A
Page 2 of 3
CY8CTMA884
CY8CTMA616
SUMMARY
Document History Page
Document Title: CY8CTMA884/CY8CTMA616, Automotive TrueTouch® Multi-Touch All-Points Touchscreen Controller
Document Number: 001-94114
Orig. of
Change
Submission
Date
Revision
ECN
Description of Change
**
4495966
5892454
KAUL
ANEE
09/09/2014 New summary datasheet.
09/22/2017 Updated to new template.
*A
Completing Sunset Review.
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office
closest to you, visit us at Cypress Locations.
®
Products
PSoC Solutions
ARM® Cortex® Microcontrollers
cypress.com/arm
cypress.com/automotive
cypress.com/clocks
cypress.com/interface
cypress.com/iot
PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP
Automotive
Cypress Developer Community
Clocks & Buffers
Interface
Forums | WICED IOT Forums | Projects | Video | Blogs |
Training | Components
Internet of Things
Memory
Technical Support
cypress.com/memory
cypress.com/mcu
cypress.com/support
Microcontrollers
PSoC
cypress.com/psoc
Power Management ICs
Touch Sensing
USB Controllers
Wireless Connectivity
cypress.com/pmic
cypress.com/touch
cypress.com/usb
cypress.com/wireless
© Cypress Semiconductor Corporation, 2014–2017. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC ("Cypress"). This document,
including any software or firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries
worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other
intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress
hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to
modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users
(either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that are infringed by the Software (as
provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation
of the Software is prohibited.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE
OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent
permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any
product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is
the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products
are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or
systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the
device or system could cause personal injury, death, or property damage ("Unintended Uses"). A critical component is any component of a device or system whose failure to perform can be reasonably
expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim,
damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other
liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.
Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in
the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners.
Document Number: 001-94114 Rev. *A
Revised September 22, 2017
Page 3 of 3
PSoC Designer™ is a trademark and PSoC®, TrueTouch®, and CapSense® are registered trademarks of Cypress Semiconductor Corporation.
2
2
2
Purchase of I C components from Cypress or one of its sublicensed Associated Companies conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided
2
that the system conforms to the I C Standard Specification as defined by Philips. As from October 1st, 2006 Philips Semiconductors has a new trade name - NXP Semiconductors.
相关型号：
©2020 ICPDF网 联系我们和版权申明