FR-9550-30A-C14-B [CYNTEC]
FUSE;FUSE
FR-9550-30A-(C01~C14)-B
Features / Applications :
OverCurrent Protection: Protect batteries from abnormal overcurrent behavior.
OverVoltage Protection: Protect batteries from abnormal overvoltage behavior.
Surface mountable fuse
Halogen free
Fast response time
UL certificated: E314624 / TUV file number: TA50201483
Electrical Specifications :
Characteristics
Rated Voltage(*1)
Feature
62VDC
Rated Breaking Capacity
Re-flow Temp.(MAX)
Fuse Resistance
80A
260℃
0.5~2.0mΩ
C01: 0.8~1.2Ω
C03: 3.2~5.2Ω
C04: 6.3~9.3Ω
C05: 10.0~15.0Ω
C07: 18.8~31.2Ω
C10: 40.0~60.0Ω
C14(C12~C14): 72.4~120.6Ω
C01: 4.0~6.6V
C03: 8.4~13.2V
C04: 11.1~18.4V
C05: 14.0~23.4V
C07: 20.2~31.5V
C10: 28.0~46.9V
C14(C12~C14): 39.6~62.0V
Heater Resistance
Operating Voltage
Note:
Maximum voltage is not the operating voltage for the heater.
1
DOCUMENT : FR955030A-B
REVISION : A1
FR-9550-30A-(C01~C14)-B
Outline Drawing :
Dimensions
L
W
T
a
9.50 ± 0.25
5.00 ± 0.20
2.00 ± 0.30
2.50 ± 0.20
1.00 ± 0.20
0.75 ± 0.20
1.25 ± 0.20
1.10 ± 0.20
7.20 ± 0.20
1.10 ± 0.20
1.60 ± 0.20
6.20 ± 0.20
Top View
Bottom view
b
c
d
e
f
g
h
i
Side View
Unit: mm
Type Designation :
FR
(1)
-
9550
(2)
-
30A
(3)
-
-
B
C□□
(4)
(5)
Note:
(1) FR:Series number
(2) 9550:9.5 mm * 5.0 mm size
(3) 30A:Rated current
(4) C□□:Cells
C01:One cell
C03:Three cells
C04:Four cells
C05:Five cells
C07:Seven cells
C10:Ten cells
C14:Twelve-fourteen cells
(5) B:B version
2
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Characteristics :
Electric performance
Item
Specification and Requirement
Fusing Time vs Electric Power
Fusing Time vs Voltage
※30AC01 Heater resistance is about 1.0Ω
※30AC03 Heater resistance is about 4.0Ω
※30AC04 Heater resistance is about 7.8Ω
※30AC05 Heater resistance is about 12.5Ω
※30AC07 Heater resistance is about 25.0Ω
※30AC10 Heater resistance is about 50.0Ω
※30AC14 Heater resistance is about 96.5Ω
3
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Fusing Time by Heater
vs
Ambient Temperature
※Testing Power: 13W
Fusing Time vs Current
※Fuse resistance is about 1.2mΩ
Fusing Time by Current
vs
Ambient Temperature
※ Fuse resistance is about 1.2mΩ (Fusing Current = 60A)
4
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Current Carrying Capacity
※Measure the current to reach the surface temperature which is
100℃ with different ambient temperature.
※Fuse resistance is about 1.2mΩ
5
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Reliability
Test Item
Condition of Test
Requirements
Carrying capacity
(UL248-14)
100% of rated current, 4hr
Without melting
100% of rated current shell be carried.
And then it shall be made to
measurement of surface temperature
200% rated current;
Temperature Rise
(UL248-14)
T < 75℃
Fusing time
(UL248-14)
13~53W shall be applied to heater.
Operating voltage shall be applied to
heater.
Clearing time < 1 min
After the fuse is interrupted, rated
voltage applied for 30sec again.
Interrupting Ability
No mechanical damages
> 10kΩ
Residual Resistance
(UL248-14)
Measure DC resistance after fusing.
Uniform coating of
solder cover minimum
of 95% surface being
immersed
Temperature of Solder: 245 5℃
Immersion Duration: 3 0.5 second
Refer to JIS C 5201-1 4.17
Solderability
(JEDEC J-STD-020D)
R: 10%
High Temperature Exposure
(JESD22-A103C)
Kept at 100℃ for 1,000 hours.
Without distinct
damage in appearance
R < 10%
Thermal Shock
-55℃/25℃/125℃/25℃, 100 cycles. Without distinct
damage in appearance
(JESD22-A104C)
300A-1ms-On, 9999ms-Off,
30000cycle.
Current Rush Withstand
Current Rush Withstand
No fusing
No fusing
100A-5ms-On, 995ms-Off,
100000cycle.
6
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Recommended Solder Pad Dimensions:
The thickness of tin plated copper layers is 2oz.
Recommended thickness of solder printing board is 0.12mm at least.
Used wire:AWG 10
Type
30A
a
b
c
d
4.13
6.0
5
6.0
Unit: mm
Chip setting
7
DOCUMENT : FR955030A-B
REVISION : A1
FR-9550-30A-(C01~C14)-B
Packaging :
Tape packaging dimensions
Direction
The direction shall be seen from the top cover tape side.
Unreeling direction
8
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Reel dimensions
TAPE WIDTH
16 mm
A
N
E
W1
W2
330 ± 2.0
100 ± 2.0
13.0 ± 0.2 17.40 ± 1.0 21.40 ± 1.0
Number of Taping: 1,000 pieces/reel
Peel strength of top cover tape :
The peel speed shall be about 300mm/min.
Label Marking:
The following items shall be marked on the reel:
1. Type designation
2. Quantity
3. Manufacturing date code
4. Manufacturer’s name
5. The country of origin
9
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Sn plating Reflow Profile :
Tp
260℃
tp:Sec max.
5
Max. Ramp Up Rate =3℃/s
Max. Ramp Down Rate =6℃/s
217℃
60~150 Sec
Preheat Area
200℃
150℃
60~120 Sec
25℃
25°C to Peak ( 8 minutes max.)
Time
Reflow Soldering Method:
Tp: 255~260℃
Max. 5 seconds
60~150 seconds
Reflow Soldering
217℃
Pre-Heat
150~200℃
60~120 seconds
Time 25℃ to peak temperature
Note: Meet JEDEC J-STD-020D
8 minutes max.
Characteristics :
Functional temperature range: -25~85℃
Operating temperature range: -10~65℃ (Fusing time <1min)
Test temperature range: 25 ± 5℃
Ambient condition
Relative humidity: 45~85%
Air Pressure: 86~106kPa
10
DOCUMENT : FR955030A-B
REVISION
: A1
FR-9550-30A-(C01~C14)-B
Other Information :
Soldering iron method
Bit temperature: 300 5℃
Application of soldering iron: 3 seconds MAX
Apply the soldering iron to the electrode.
The specimen shall be stored at standard atmospheric condition for 24h, after which
the measurements shall be made. Do not suggest products for re-work.
Product storage conditions
This product should be dark and at ambient temperature is less than 40℃ or relative
humidity less than 60% RH place, in the above storage conditions the storage period
of 6 months.
Precautions on use
Avoid contact with the resin film with this product, its resin may seep into the
product, so the product does not apply to the resin material relevance, its properties
can’t be fully guaranteed.
11
DOCUMENT : FR955030A-B
REVISION
: A1
相关型号:
©2020 ICPDF网 联系我们和版权申明