VFH230CBATA-750K [CTS]
Oscillator,;VFH230C Series
Crystal Oscillators LVPECL/LVDS 3.3V
5X7 mm Surface Mount High Reliability
750 KHz to 800 MHz
Hi-Reliability Product Specification
XO
Features
Description
High speed – Low jitter LVPECL or LVDS output with
tristate
These high reliability oscillators provide
PECL/LVDS waveforms for applications subjected to
the most stringent environmental conditions. They are
mechanically robust and weigh less than 0.2 grams.
This 5X7 mm SMD package has a hermetic seal, thus
ensuring the integrity of each oscillator. Each
oscillator is burned-in at 125°C for 168 hours,
temperature cycled and centrifuged then fully tested
in accordance with Table 1. Reliability tests are
performed per Table 2. The calculated MTBF is
3.8X106 at 125°C.
Small SMD package (5X7 mm)
Stability options from +/-25ppm to +/-100ppm
Leadless chip carrier package is hermetically sealed for
superior aging and field performance
Crystal angle controlled to +/-0.5 for excellent temperature
stability
168 hour Class B burn-in and extensive environmental
testing for best performance in rugged field environments
Tristate option available
Serialized test data available
Calculated MTBF is 3.8X106 hours at 125°C
Typical Applications
Connections
Telecom/networking systems that require low jitter clocks
PIN 1
Tristate
N/C
•
•
•
•
•
DSL,
Gigabit Ethernet,
Fibre channel
Pin 2
PIN 3
PIN 4
PIN 5
PIN 6
Ground
Output 1: Q
Output 2: Q
+VDD
Optical networking
Extended temperature applications
Valpey Fisher Corporation • 75 South Street, Hopkinton, MA 01748 • Tel. 1-800-XTALREP, 508-435-6831 • FAX 508 4355289
1
VFH230C Series
Crystal Oscillators LVPECL/LVDS 3.3V
5X7 mm Surface Mount High Reliability
750 KHz to 800 MHz
ENVIRONMENTAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Shock- MIL-STD 883, Method 2002, Test Condition B
(1500 peak g, 0.5 ms duration, ½ sine wave, 5 shocks in 6 planes)
Vibration- MIL-STD 883, Method 2007, Test Condition A
(20-2000Hz of .06:d.a. or 20 Gs, whichever is less)
Humidity- Resistant to 85° R.H. at 85°C
Frequency Range
750 KHz to 800 MHz
Frequency Stability
Includes calibration at 25°C, operating
temperature, change of input voltage,
change of load, shock and vibration
100, 50, 25 or 20 ppm
MIN
TYP
MAX
UNITS
Input Voltage, VDD
Jitter
3.15
3.3
3.45
volts
Period jitter RMS
19.44MHz
5
8
ps
ps
ps
ps
Table 1
77.76MHz
155.52MHz
9
Each unit undergoes the following:
622.08MHz
10
1. Stabilization Bake
2. Temperature Cycling
3. Constant Acceleration
4. Burn-in
MIL-STD-883 Method 1008, Cond,.B
MIL-STD-883 Method 1010, Cond, B
MIL-STD-883 Method 2001, Cond, A
MIL-STD-883 Method 1015, Cond B
(125°C for 168 hours with bias)
Integrated jitter RMS
12 KHz to 20 MHz @ 155.52MHz
3
5
ps
Symmetry at (VDD-1.3) VDC (PECL) 40
50
50
60
60
percent
percent
5. Fine Leak
MIL-STD-883 Method 1014, Cond. A1
MIL-STD-883 Method 1014, Cond C
At (1.25 VDC) (LVDS)
40
6. Gross Leak
7. Electrical Test at 25°C and temperature extremes, as follows:
Aging
First year
3
1
ppm
A. Frequency
B. Current
F. Duty Cycle
G. Frequency at 3.6V
H. Frequency at 3.0V
I. “Zero” logic level
J. “One” logic level
K. Tristate
After first year
ppm/yr
C. Rise Time
D. Fall Time
E. Duty Cycle
Tristate
Input Requirements for Pin 1:
“1”: On-Pin 1 may float or 2.8V min
“0”: Tristate-Pin 1 requires 0.4V max
Test Data on each unit is available for additional cost
Typical Phase Noise (dBc/Hz) 10Hz 100Hz 1KHz 10KHz 100KHz
Oscillator Frequency
19.44MHz
106.25MHz
155.52MHz
622.08MHz
-60
-60
-60
-60
-90
-90
-90
-90
-112
-112
-112
-109
-140
-127
-125
-110
-140
-125
-123
-109
Valpey Fisher Corporation • 75 South Street, Hopkinton, MA 01748 • Tel. 1-800-XTALREP, 508-435-6831 • FAX 508 4355289
2
VFH230C Series
Crystal Oscillators LVPECL/LVDS 3.3V
5X7 mm Surface Mount High Reliability
750 KHz to 800 MHz
PECL Output Models
Electrical Specifications
.
MIN
TYP
MAX
UNITS
RL = 50 Ω to (VDD- 2V)
(see figure)
Output High Voltage, VOH
Output Low Voltage, VOL
Input Current, PECL
0.75 – 24 MHz
VDD-1.025
V
V
VDD-1.620
25
65
mA
mA
mA
24 – 160 MHz
160 – 800 MHz
100
Switching Characteristics
Clock Rise Time, tr
@20/80%
0.3
0.3
0.35
0.35
ns
ns
Clock Fall Time, tf
@80/20%
LVDS Output Models
Electrical Specifications
MIN
TYP
MAX
UNITS
RL = 100 Ω
(see figure)
Output Differential Voltage, VOD
Output High Voltage, VOH
Output Low Voltage, VOL
Offset Voltage, VOS
247
355
1.4
1.1
1.2
454
1.6
mV
V
0.9
V
1.125
1.375
V
Input Current, LVDS
0.75 – 24 MHz
24 – 96 MHz
25
45
80
mA
mA
mA
96 – 800 MHz
Switching Characteristics
Differential Clock Rise Time, tr
Differential Clock Fall Time, tf
0.3
0.3
0.4
0.4
ns
ns
HOW TO ORDER
VFH230C A
A
For part Number, put package type beforTe model number, and add frequency in MHz, for example:
A
125
M
Frequency
M=MHz
K=KHz
Tristate
Frequency Stability
A=+/-100ppm
B=+/-50ppm
Output Logic
T=Tristate
A=45/55%LVDS
B=40/60%LVDS
C=45/55%PECL
D=40/60%PECL
Temparature Range
A= -55 to +85°C*
B= -55 to +125°C*
C=+/-25ppm
D=+/-20ppm
*Temperature Range only available in with stability options of 50 or 100ppm
Valpey Fisher Corporation • 75 South Street, Hopkinton, MA 01748 • Tel. 1-800-XTALREP, 508-435-6831 • FAX 508 4355289
3
VFH230C Series
Crystal Oscillators LVPECL/LVDS 3.3V
5X7 mm Surface Mount High Reliability
750 KHz to 800 MHz
MARKING SPECIFICATION
MECHANICAL DESCRIPTION
The format for the marking is:
Leak-MIL STD 883, method 1014, condition A1 and C1
Case-Hermetically sealed ceramic LCC
Pads-60 microinch of gold over nickel
Valpey-Fisher
Model Code (XX) Date Code (YY)
VFH230C Oscillator
RXXYY
725.00
Marking-Epoxy ink or laser engraved
Resistance to Solvents-MIL STD 202, Method 215
Frequency
Pin 1
Valpey Fisher Corporation • 75 South Street, Hopkinton, MA 01748 • Tel. 1-800-XTALREP, 508-435-6831 • FAX 508 4355289
4
VFH230C Series
Crystal Oscillators LVPECL/LVDS 3.3V
5X7 mm Surface Mount High Reliability
750 KHz to 800 MHz
TABLE 2- RELIABILITY TEST PROCEDURE AND CONDITIONS FOR QUARTZ CRYSTAL OSCILLATORS
1. Group A
Electrical Characteristics at -55°, (0° for ‘5515), 25° and 125° (70° for M5515 and 85° for M5622)
Frequency @ 4.5, 5.0 and 5.5 volts (for 5 volts units)
Symmetry (Duty Cycle)
Input current
Zero/One levels
Rise/Fall times
Physical Dimensions
Length/width
Height
Package finish (Corrosion, discoloration, etc.)
Marking placement/legibility
II. Group B- Life Test
1000 hrs at 125°C with bias and load
III.
Group C- All units have passed Group A testing
A. Subgroup 1-8 pcs.
Standard
Condition
Method 2002
COND.B
Description
End point measurement
MIL-STD-883
Mechanical Shock
Frequency
1500 g’s, 5ms
5 drops, 6 axis
Vibration, var.
freq. 20 g’s,
Output Waveform
MIL-STD-883
Method 2007
COND. A.
Frequency
Output waveform
.06” disp., 20-
20, 000-20 Hz
Solderability
MIL-STD-883
Method 2003
Visual 95% coverage
B. Subgroup 2-4 pcs (One-half of Subgroup 1)
MIL-STD-883
Method 1011
COND. B
Thermal Shock
Liq. To liq.
Frequency
Output waveform
15 cycles
MIL-STD-202
MIL-STD-883
Method 105
COND. B
Altitude, 3.44
inch Hg. 12 hrs
Moisture resist.
With 5V applied
25-65°C, 90 to
100% RH, 10 cycles
Resistance to
Frequency
Output waveform
Frequency
Method 1004
Output waveform
MIL-STD-202
Method 210
COND.A
Frequency
Solder Heat
Output waveform
Immersion @350°C
3.5 sec
C.Subgroups 3-4 pcs. (One half of Subgroup 1)
Standard
Condition
Description
End point measurement
Storage Temp.
No. Oper
24 hrs. @ -55°C
Frequency
Output waveform
Frequency
24 hrs. @ 125°C
Salt Atmosphere
24 hrs. @ 35°C
.5-3.0% Solution
Fine Leak
MIL-STD-883
Method 1009
COND. A
Output waveform
Visual
MIL-STD-883
MIL-STD-883
Method 1014
COND. B
Qs <5 X10-8
Method 1014
COND. C
Gross Leak
Visual in 125°C
Detector fluid
Rev. 1.0 1/05
Valpey Fisher Corporation • 75 South Street, Hopkinton, MA 01748 • Tel. 1-800-XTALREP, 508-435-6831 • FAX 508 4355289
5
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_2.jpg)
VFH230CBATA-800MHZ
LVDS Output Clock Oscillator, 800MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_2.jpg)
VFH230CBATB-0.75MHZ
LVDS Output Clock Oscillator, 0.75MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_2.jpg)
VFH230CBATB-800MHZ
LVDS Output Clock Oscillator, 800MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_2.jpg)
VFH230CBATC-0.75MHZ
LVPECL Output Clock Oscillator, 0.75MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/VFH230C-DBTB_1771631_files/VFH230C-DBTB_1771631_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/VFH230C-DBTB_1771631_files/VFH230C-DBTB_1771631_2.jpg)
VFH230CBATD-0.75MHZ
LVPECL Output Clock Oscillator, 0.75MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_2.jpg)
VFH230CBATD-800MHZ
LVPECL Output Clock Oscillator, 800MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00244/img/page/VFH230CBATB-_1479041_files/VFH230CBATB-_1479041_2.jpg)
VFH230CBBNA-0.75MHZ
LVDS Output Clock Oscillator, 0.75MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, SMD, LCC-6
CTS
©2020 ICPDF网 联系我们和版权申明