116GE300C100B1 [CTS]
Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor; 商用3/4 ( 19.05毫米)直径, 2瓦特可变电阻器型号: | 116GE300C100B1 |
厂家: | CTS |
描述: | Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor |
文件: | 总4页 (文件大小:1069K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series 115
®
3
Commercial / "
4
(19.05mm) diameter,
2 watt variable
resistor
• Fully enclosed construction
• Four mounting styles
• Long rotational life
• Optional grounded or insulated rotor
construction
• Incorporated fixed resistor available
• Available with nylon shaft
• Interchangeable mounting with
CTS series 110 preset potentiometers
Electrical and Mechanical Specifications
Resistance Range
Adjustment of Resistance
1 ohm through 20K ohms (linear taper)
Standard: Cross slot provided in rotor for screwdriver
adjustment.
Resistance Tolerance
Special: Molded nylon% screwdriver-slotted shafts which
are integral with rotor are available in many lengths
in increments of 1/8" (ꢀ.2mm) up to a maximum
of 2" (±0.8mm).
Available: ±±5% ±105% ±205
Power Rating, Watts
Standard: 2 watts @ ±±°C% derated to no load @ 10±°C
linear taper% control mounted on metal panel
4" x 4" x .0±0" (101.6mm x 101.6mm x 1.27mm)
Available Mounting Types
Printed circuit mounted: Type 11±
Twist tab mounted:
Ear mounted:
Rivet ear mounted:
Type P11±
Type 116
Type 117
Voltage Rating
Terminals to case (insulated types only)
High pot test% one minute — 900 VAC
Operating maximum — ±00 VDC
Terminal Information
Across end terminals
Determined by resistance value and wattage rating
Grounded Construction — The grounded construction is
supplied without a center terminal and the contactor is
connected to the case. This construction can be furnished
with one end terminal at either end of the resistance
element or with terminals at both ends of the element.
Resistance Taper
Linear (±ꢀ5 independent linearity% standard)
Taps
Insulated Construction — The contactor is insulated from the
base and connected to the center terminal on the insulated
construction. This construction can be supplied with the
center terminal and one end terminal at either end of the
resistance element or with the center terminal and terminals
at both ends of the resistance element.
None
Incorporated Fixed Resistor
A fixed resistor can be incorporated in the Series 11±
at the end of CW or CCW rotation to a minimum of 1±5
of the total resistance value. The rotation is shortened
by an amount proportional to the ratio of the fixed resistor
to the total resistance value.
Rotational Torque
Turning Torque: 1/2 to 10 inch-ounces (ꢀ6 – 720 g-cm)
Stop Strength: 4 inch-pounds (4.6 Kg-cm)
Angle of Rotation
270° ± ±°
Technical Data Sheet 1448C
Technical Data Sheet 1115
C T S C O R P O R A T I O N / M A N U F A C T U R E R O F R E L I A B L E E L E C T R O N I C C O M P O N E N T S
Type 115, P.C. Mounted
MM
DIMENSION:
INCH
Type P115, Twist Tab Mounted
MM
DIMENSION:
INCH
Type 116, Ear Mounted
MM
DIMENSION:
INCH
Type 117, Rivet Ear Mounted
MM
DIMENSION:
INCH
Ordering Information
11±
G
P
ꢀ
00
C
10ꢀ
B
1
TAPER
SERIES MOUNTING
DESIGNATION
MOUNTING
STYLE
SHAFT
RESISTANCE CODE
EXAMPLES
LENGTH
1 – LINEAR
115 – PC MOUNT
P115 – TWIST TAB
116 – EAR
BUSHING:
T – TWIST TAB
P – PC
E – EAR
R – RIVET EAR
00 – NO SHAFT
CODE RESISTANCE
100
500
101
501
102
252
502
103
203
10 OHMS
±0
100
±00
1K
2.±K
±K
10K
20K
117 – RIVET EAR
RESIST
TOLERANCE
LOCATING
LUG
A – ±105
B – ±205
D – ±±5
SHAFT TRIM
TERMINAL STYLE
C – CROSS
C – SLOT
J – INSULATED
3 – NONE
CONSTRUCTION
G – GROUNDED
CONSTRUCTION
Order From:
CTS CORPORATION, ELECTROCOMPONENTS / 1601 Mishawaka Street / Elkhart% Indiana 46±14
North America Toll Free (888) 287-4690 / (219) 296-6700 / FAX: (219) 29ꢀ-1240 http://www.ctscorp.com
CTS COMPONENTS TAIWAN, LTD. / 7% Central 6th Road (Chung Liu Road) / P.O. Box 26-20
Kaohsiung Export Processing Zone / Kaohsiung% Taiwan% Rep. of China
(07) 821614± / FAX: (07) 8417642.8110040
2.±M-6-99I
相关型号:
©2020 ICPDF网 联系我们和版权申明