PRGD24150 [CRYDOM]
Panel Mount; 面板安装型号: | PRGD24150 |
厂家: | CRYDOM INC., |
描述: | Panel Mount |
文件: | 总5页 (文件大小:584K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRG Series
• High current SSR rated to 150A @ 48-660 VAC
• SCR output for heavy industrial loads
• AC or DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage
3-15 VDC
150A
PRGD24150
150A
150A
90-140 VAC
4-15 VDC
PRGA24150
PRGA48150
PRGD48150
PRGA60150
PRGD60150
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
24-280
600
5.0
500
150
48-530
1200
5.0
500
150
48-660
1200
1.0
500
150
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)
Maximum Load Current (3) [Arms]
Minimum Load Current [Arms]
0.15
1750
1.7
0.15
12700
0.15
1750
1.7
0.15
12700
0.15
1750
1.7
0.15
12700
Maximum Surge Current (16.6ms) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum I2 t for Fusing (8.3 msec) [A2 sec]
Minimum Power Factor (with Maximum Load)
0.5
0.5
0.5
INPUT SPECIFICATIONS (1)
Description
240 V Models
3-15 VDC
480 V Models
4-15 VDC
4.0 VDC
1.0 VDC
15 mA @ 5 VDC
300 Ohm
Control Voltage Range
90-140 Vrms
90 Vrms
10 Vrms
10 mA @ 120 VAC
14.1 K Ohm
10
Maximum Turn-On Voltage
Minimum Turn-Off Voltage
Typical Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
3.0 VDC
1.0 VDC
15 mA @5 VDC
300 Ohm
1/2 Cycle
1/2 Cycle
1/2 Cycle
1/2 Cycle
40
GENERAL SPECIFICATIONS
Description
Parameters
4000 Vrms
109 Ohm
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
10 pF
-30 to 80 °C
-40 to 125 °C
12 oz (340g)
Encapsulation
Power Terminals:
Control Terminals:
Thermally conductive Epoxy
MS Screws Furnished, Mounted
.050 x .020 Square Pins
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, for derating curves see page 2.
4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models)
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Rev. 121710
ANNEX - ENVIROMENTAL INFORMATION
相关型号:
©2020 ICPDF网 联系我们和版权申明