MCTC2425JLD [CRYDOM]
Trigger Output SSR, 1-Channel, 4000V Isolation, ROHS COMPLIANT, PLASTIC PACKAGE-8;型号: | MCTC2425JLD |
厂家: | CRYDOM INC., |
描述: | Trigger Output SSR, 1-Channel, 4000V Isolation, ROHS COMPLIANT, PLASTIC PACKAGE-8 输出元件 光电 |
文件: | 总6页 (文件大小:1380K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MCTC Series
• Microprocessor based temperature controller / SSR
• Ratings from 25A to 90A @ 48-530 VAC
• Direct J or K thermocouple input
• Voltage or current controlled setpoint
• Separate output enable / disable control
• Open thermocouple protection
• LED status indicators
• Optional 5Vdc output voltage for setpoint voltage
Reference
• For use with resistive loads only
PRODUCT SELECTION
Description
280 VAC
25 A
MCTC2425
50 A
MCTC2450
90 A
MCTC2490
480 VAC
MCTC4825
MCTC4850
MCTC4890
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (voltage)
Description
240 VAC
480 VAC
48-530
1200
Operating Voltage (47-63Hz) [Vrms]
24-280
600
7
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]
12
200
200
OUTPUT SPECIFICATIONS (current)
Description
Maximum Load Current [Arms]
25 A
25
50 A
50
90 A
90
Minimum Load Current [mArms]
150
250
1.6
1.02
260
0.5
150
625
1.6
0.63
1620
0.5
150
1200
1.6
0.28
6000
0.5
Maximum Surge Current (16.6ms) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum I²t for Fusing (8.3 msec) [A²sec]
Minimum Power Factor (with Maximum Load)
INPUT SPECIFICATIONS (1)
Description
P1 Voltage Supply Range (VDC)
DC Control
8-32
P1 Supply Current Range [mA] (2)
Control Nominal Input Impedance [Ohms] [P3]
Control Must Operate Voltage "On"[VDC][P3]
Control Must Release Voltage "Off" [VDC][P3]
Control Input Current [mA][P3]
PLVI Range Option A [VDC][P4] (3)
PLVI Range Option B [VDC][P4] (3)
PLVI Range Option C [VDC][P4] (3)
PLVI Range Option D [ma][P4] (3)
Nominal Input Impedance Option A,B,C[ohms][P4]
Nominal Input Impedance Option D [ohms][P4]
Output Voltage [VDC][P5]
28-30
30K
5-32
0-4
0-1.25
0.8-5
1-7
2-10
4-20
20K
220
4.75-5.25
10
Maximum Output Current [mA][P5]
GENERAL SPECIFICATIONS
Description
Parameters
4000 Vrms
109 Ohm
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
10 pF
-20 to 80°C
-40 to 125 °C
3.0 oz (86.5g)
Encapsulation
Terminals-Power
Terminals-Control
Recommended Terminal Screw Torque Range:
Thermally conductive Epoxy
Screws and Saddle Clamps Furnished, Unmounted
Barrier Strip Screw Terminals
8-32 Screws -20 in. lbs.(Screws dry without grase)
OUTPUT STATUS FUNCTIONS
Description
GREEN LED (setpoint)
RED LED (output)
Initial Logic Supply On
Operating (to 85 % of set point)
Approaching Setpoint
At Setpoint (± 5%)
Flash Once
Flash Once
Off
Off
On
On
Variable Flashing
Slow Flashing
Over Setpoint (>5%) (4)
Short-Cycle Timing ("R" suffix only)
Open Thermocouple
Flashing
Flash 2x Intermittently
Flash 3x Intermittently
Off
Off
Off
GENERAL NOTES
1) Voltages are reference to GND (Ground = 0 VDC) P2
2) Input current may vary with –E option.
3) PLVI voltage can go up to max. supply voltage without damage.
4) Below Setpoint for “R” suffix
MECHANICAL SPECIFICATIONS
WIRING DIAGRAM
THERMAL DERATE INFORMATION
TEMPERATURE VS SETPOINT INPUT P4
AGENCY APPROVALS
UL E116949
Rev. 032111
ANNEX - ENVIROMENTAL INFORMATION
相关型号:
MCTC2425JRC
Trigger Output SSR, 1-Channel, 4000V Isolation, ROHS COMPLIANT, PLASTIC PACKAGE-8
CRYDOM
©2020 ICPDF网 联系我们和版权申明