B53TP50C [CRYDOM]
PANEL MOUNT; 面板安装
CRYDOM INC., 
53TP Series IP20
• Three-phase solid-state relay; Ratings 25A , 50A per phase @ 48-530 VAC
• 2 package styles IP20 or IP00 (See IP00 spec sheet for more information)
• SCR output for heavy industrial loads
• AC or DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
• LED input status indicator
• Transient protection built in
PRODUCT SELECTION
Control Voltage
90-140 VAC
180-280 VAC
4-32 VDC
25A
50A
B53TP25C
C53TP25C
D53TP25C
E53TP25C
B53TP50C
C53TP50C
D53TP50C
E53TP50C
18-36 VAC
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
25 A
48-530
1200
3
500
25
50 A
48-530
1200
3
500
50
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)
Maximum Load Current per phase [Arms] (3)
Minimum Load Current per phase [Arms]
0.1
0.1
Maximum Surge Current 50-60 Hz (16.6ms) [Apk]
Maximum 1 Second Surge Current 50/60 Hz [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum I²t for Fusing 50-60 Hz (8.3 msec) [A² sec]
Minimum Power Factor (with Maximum Load)
275-300
85
1.35
0.24
380-370
0.5
710-750
150
1.35
.012
2520-2320
0.5
INPUT SPECIFICATIONS (1)
Description
D53
4-32 VDC
4.0 VDC
1.0 VDC
24 mA
B53
C53
E53
Control Voltage Range
90-140 VAC
180-280 VAC (5)
18-36 VAC
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Minimum Input Current (for on-state)
Maximum Input Current
90
10
7.0 mA
16 mA
180
10
7.0 mA
20 mA
18
2
15 mA
20 mA
35 mA
Nominal Input Impedance
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
Current Regulated
8.33
Current Regulated
Current Regulated
Current Regulated
20
30
20
30
20
30
8.33
GENERAL SPECIFICATIONS
Description
Parameters
4000 Vrms
109 Ohm
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
8 pF
-40 to 80°C
-40 to 125 °C
12.7 oz (360g)
NA
Encapsulation
Terminals
Hardware Furnished, mounted
8-10 / 0.9-1.1
Input Terminal Screw Torque Range:[in lbs/Nm]
Output Terminal Screw Torque Range:[in lbs/Nm]
15-20 / 1.7-2.2
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, see page 3 for derating curves.
4) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models)
5) Operating temperature for 180-280 VAC input is -40 to +60°C
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Rev. 041310
ANNEX - ENVIROMENTAL INFORMATION
相关型号：
©2020 ICPDF网 联系我们和版权申明