XB-E [CREE]
XLamp XB-E HighâVoltage White LEDs;
| 型号： | XB-E |
| 厂家： | 
CREE, INC |
| 描述： | XLamp XB-E HighâVoltage White LEDs |
| 文件： | 总11页 (文件大小：1501K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product family data sheet
Cree® XLamp® XB-E High-Voltage White LEDs
PRODUCT DESCRIPTION
FEATURES
TABLE OF CONTENTS
Built on Crꢀꢀ’s SC³ Tꢀchnology® Platform,
thꢀ XLamp® XB-e High-voltagꢀ Whitꢀ
(HvW) LeD is optimizꢀd to lowꢀr cost for
high-lumꢀn, omnidirꢀctional rꢀplacꢀmꢀnt
lamps. Thꢀ XB-e HvW LeD dꢀliꢁꢀrs high
efficacy in the small XB footprint and
enables smaller and more efficient driver
circuits than standard-ꢁoltagꢀ LeDs.
In addition, thꢀ XB-e LeD has a widꢀr
light distribution that can improꢁꢀ thꢀ
omnidirꢀctionality of eNeRGY STAR®
rꢀplacꢀmꢀnt lamps.
•
•
•
•
Binned @ 85 °C & 44mA
Charactꢀristics....................................... 2
Flux Characteristics ............................... 2
Rꢀlatiꢁꢀ Spꢀctral Powꢀr Distribution .... 3
elꢀctrical Charactꢀristics....................... 3
Relative Flux vs. Current ........................ 4
Typical Spatial Distribution.................... 4
Thꢀrmal Dꢀsign...................................... 5
Reflow Soldering Characteristics.......... 6
Notꢀs ...................................................... 7
Mꢀchanical Dimꢀnsions ........................ 9
Tapꢀ and Rꢀꢀl....................................... 10
Packaging............................................. 11
Aꢁailablꢀ in 80-minimum CRI
125 mA maximum drive current
23.5 V typical forward voltage
@ 85 °C, 44 mA
•
•
Wide viewing angle: 140°
Reflow solderable - JEDEC
J-STD-020C compatible
Unlimited floor life at
•
≤ 30 °C/85% RH
•
•
•
elꢀctrically nꢀutral thꢀrmal path
RoHS and ReACh compliant
UL®-rꢀcognizꢀd componꢀnt
(E349212)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³
Technology® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp® XB-E HVW LED
CHARACTERISTICS
Characteristics
Unit
Minimum
Typical
Maximum
Thꢀrmal rꢀsistancꢀ, junction to soldꢀr point
viꢀwing anglꢀ (FWHM)
°C/W
dꢀgrꢀꢀs
mV/°C
6.5
140
Temperature coefficient of voltage
ESD classification (HBM per Mil-Std-883D)
DC forward currꢀnt
-19
Class 2
mA
v
125
0.1
Rꢀꢁꢀrsꢀ ꢁoltagꢀ
Forward voltage (@ 44 mA, 85 °C)
LeD junction tꢀmpꢀraturꢀ
v
23.5
26.5
150
°C
FLUX CHARACTERISTICS (TJ = 85 °C)
Thꢀ following tablꢀ proꢁidꢀs sꢀꢁꢀral basꢀ ordꢀr codꢀs for XLamp XB-e HvW LeDs. It is important to notꢀ that thꢀ basꢀ ordꢀr codꢀs listꢀd
hꢀrꢀ arꢀ a subsꢀt of thꢀ total aꢁailablꢀ ordꢀr codꢀs for thꢀ product family. For morꢀ ordꢀr codꢀs, as wꢀll as a complꢀtꢀ dꢀscription of thꢀ
ordꢀr-codꢀ nomꢀnclaturꢀ, plꢀasꢀ consult thꢀ XLamp XB LeD Family Binning and Labꢀling documꢀnt.
Minimum Luminous Flux
Calculated Minimum
Luminous Flux (lm)**
CCT Range
@ 44 mA
Color
Order Code
Flux (lm) @
85 °C
Flux (lm) @
25 °C*
Minimum
Maximum
Group
66 mA
100 mA
R3
R2
Q4
Q3
122
114
100
93.9
140
171
160
140
132
236
221
194
182
XBeHvW-H0-0000-00000HFe3
XBeHvW-H0-0000-00000Hee3
XBeHvW-H0-0000-00000HCe7
XBeHvW-H0-0000-00000HBe7
4750 K
2700 K
5000 K
131
118
108
80 CRI Minimum
3000 K
Notꢀs:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI mꢀasurꢀmꢀnts. Sꢀꢀ thꢀ Mꢀasurꢀmꢀnts sꢀction (pagꢀ 7).
•
Minimum CRI for 80 CRI Minimum is 80.
*
Flux values @ 25 °C are calculated and are for reference only.
** Calculated flux values at 66 mA and 100 mA are for 85 °C and are for reference only.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
2
XLamp® XB-E HVW LED
RELATIVE SPECTRAL POWER DISTRIBUTION
100
80
60
40
20
0
2600 K - 3700 K CCT
3700 K - 5000 K CCT
380
430
480
530
580
630
680
730
780
Wavelength (nm)
ELECTRICAL CHARACTERISTICS (TJ = 85 °C)
125
100
75
50
25
0
21
22
23
24
25
26
27
Forward Voltage (V)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
3
XLamp® XB-E HVW LED
RELATIVE FLUX VS. CURRENT (TJ = 85 °C)
250
200
150
100
50
0
0
25
50
75
100
125
Forward Current (mA)
TꢀPICAL SPATIAL DISTRIBUTION
120
100
80
60
40
20
0
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (º)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
4
XLamp® XB-E HVW LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to bꢀ dꢀsignꢀd in a mannꢀr that minimizꢀs thꢀ thꢀrmal rꢀsistancꢀ from thꢀ soldꢀr point to ambiꢀnt in ordꢀr to optimizꢀ lamp lifꢀ
and optical charactꢀristics.
140
120
100
80
60
Rj-a = 10 °C/W
40
Rj-a = 15 °C/W
Rj-a = 20 °C/W
Rj-a = 25 °C/W
20
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
5
XLamp® XB-E HVW LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XB-E HVW LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
pastꢀ usꢀd.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
Critical Zone
TL to TP
TP
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J-STD-020C
Time
Profile Feature
Lead-Free Solder
Aꢁꢀragꢀ Ramp-Up Ratꢀ (Tsmax to Tp)
1.2 °C/second
120 °C
Prꢀhꢀat: Tꢀmpꢀraturꢀ Min (Tsmin
Preheat: Temperature Max (Tsmax
Prꢀhꢀat: Timꢀ (tsmin to tsmax
)
)
170 °C
65-150 sꢀconds
217 °C
)
Timꢀ Maintainꢀd Aboꢁꢀ: Tꢀmpꢀraturꢀ (TL)
Timꢀ Maintainꢀd Aboꢁꢀ: Timꢀ (tL)
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
Ramp-Down Ratꢀ
20-40 seconds
1 - 6 °C/second
4 minutes max.
Time 25 °C to Peak Temperature
Notꢀ: All tꢀmpꢀraturꢀs rꢀfꢀr to thꢀ topsidꢀ of thꢀ packagꢀ, mꢀasurꢀd on thꢀ packagꢀ body surfacꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
6
XLamp® XB-E HVW LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
rꢀprꢀsꢀnt product mꢀasurꢀmꢀnts as of thꢀ datꢀ of shipmꢀnt. Thꢀsꢀ mꢀasurꢀmꢀnts will changꢀ oꢁꢀr timꢀ basꢀd on a numbꢀr of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Plꢀasꢀ rꢀad thꢀ LeD Rꢀliability Oꢁꢀrꢁiꢀw for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 rꢀsults documꢀnt.
Plꢀasꢀ rꢀad thꢀ Long-Tꢀrm Lumꢀn Maintꢀnancꢀ application notꢀ for morꢀ dꢀtails on Crꢀꢀ’s lumꢀn maintꢀnancꢀ tꢀsting and forꢀcasting.
Plꢀasꢀ rꢀad thꢀ Thꢀrmal Managꢀmꢀnt application notꢀ for dꢀtails on how thꢀrmal dꢀsign, ambiꢀnt tꢀmpꢀraturꢀ, and driꢁꢀ currꢀnt affꢀct
thꢀ LeD junction tꢀmpꢀraturꢀ.
Moisture Sensitivity
Crꢀꢀ rꢀcommꢀnds kꢀꢀping XLamp LeDs in thꢀ proꢁidꢀd, rꢀsꢀalablꢀ moisturꢀ-barriꢀr packaging (MBP) until immꢀdiatꢀly prior to soldꢀring.
Unopꢀnꢀd MBPs that contain XLamp LeDs do not nꢀꢀd spꢀcial storagꢀ for moisturꢀ sꢀnsitiꢁity.
Once the MBP is opened, XLamp XB-E HVW LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life
in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in
thꢀ original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documꢀntation sꢀctions of www.crꢀꢀ.com.
REACh Compliance
ReACh substancꢀs of ꢁꢀry high concꢀrn (SvHCs) information is aꢁailablꢀ for this product. Sincꢀ thꢀ europꢀan Chꢀmical Agꢀncy (eCHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insurꢀ you gꢀt thꢀ most up-to-datꢀ ReACh SvHC Dꢀclaration. ReACh bannꢀd substancꢀ information (ReACh Articlꢀ 67) is also aꢁailablꢀ
upon request.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
7
XLamp® XB-E HVW LED
NOTES - CONTINUED
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer
to thꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
8
XLamp® XB-E HVW LED
MECHANICAL DIMENSIONS
Thꢀrmal ꢁias, if prꢀsꢀnt, arꢀ not shown on thꢀsꢀ drawings.
All mꢀasurꢀmꢀnts arꢀ ±.13 mm unlꢀss othꢀrwisꢀ indicatꢀd.
1.14
0.82
ANODe
2.2
±0.1 mm
0.46
2.45
90°
0.94
0.33
0.2
0.36
0.92
0.73
2.45
Top View
Side View
Bottom View
0.85
0.36
0.82
0.43
0.43
0.46
0.36
2.34
0.28
2.27
1.17
1.14
0.28
0.28
0.92
0.28
0.36
2.27
0.36
2.34
Recommended PCB Solder Pad
Recommended Stencil Pattern
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
9
XLamp® XB-E HVW LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Unlꢀss othꢀrwisꢀ indicatꢀd, all dimꢀnsions in mm
Tolerance unless specified: .xx ±.25, .xx ±.125, x° ± 5°
1.50 +.10/-.00
1.75 ±.10
4.00 ±.10
2.00 ±.10
CATHODE SIDE
B
B
2.60+/-0.1mm
4°
12.00 Nominal
12.30 Max
10.25 ±.10
ANODE SIDE
.30 ± .10
8.00 ±.10
5.50 ±.10
1.00 ± .10
2.05 +/-0.1
2.60 +/-0.1
User Feed Direction
END
START
Loaded Pockets
(1,000 Lamps)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
10
XLamp® XB-E HVW LED
PACkAGING
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, and SC³ Technology® are registered trademarks and the Cree logo
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.
11
相关型号：
©2020 ICPDF网 联系我们和版权申明