LO566EPG3-70G-A3-00026 [CREE]

Optoelectronic Device;
LO566EPG3-70G-A3-00026
型号: LO566EPG3-70G-A3-00026
厂家: CREE, INC    CREE, INC
描述:

Optoelectronic Device

文件: 总5页 (文件大小:338K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
®
Cree 5-mm Oval LED  
Model # LO566EPG3-70G-A3  
Data Sheet  
70-degree, 5-mm oval LED lamp in green color with tinted, transparent lens and stopper  
Applications  
Variable-Message Signs  
Message Boards  
Absolute Maximum Ratings (TA = 25°C)  
Items  
Symbol  
Absolute Maximum Rating  
Unit  
Forward Current  
Peak Forward Current  
Reverse Voltage  
IF  
25  
100  
mA  
mA  
V
Note  
IFP  
VR  
PD  
5
Power Dissipation  
100  
mW  
°C  
Operation Temperature  
Storage Temperature  
T
-40 ~ +95  
-40 ~ +100  
opr  
Tstg  
Tsol  
°C  
Max. 260°C for 3 sec. max.  
(3 mm from the base of the epoxy bulb)  
Lead Soldering Temperature  
Note: Pulse width ≤0.1 msec, duty ≤1/10.  
Typical Electrical & Optical Characteristics (TA = 25°C)  
Characteristics  
Forward Voltage  
Symbol  
Condition  
IF = 20 mA  
VR = 5 V  
Unit  
V
Minimum  
Typical  
Maximum  
4.0  
VF  
IR  
3.4  
Reverse Current  
μA  
100  
Dominant Wavelength  
Luminous Intensity  
λD  
IV  
IF = 20 mA  
IF = 20 mA  
nm  
mcd  
520  
527  
535  
3000  
4700  
2θ½H-H  
2θ½V-V  
IF = 20 mA  
IF = 20 mA  
deg  
deg  
70  
35  
50% Power Angle  
Subject to change without notice.  
www.cree.com/ledlamps  
Standard Bins for LO566EPG3-70G-A3 (IF = 20 mA)  
Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown.  
Orders for LO566EPG3-70G-A3 may be filled with any or all bins contained as below.  
All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA.  
X7  
X8  
X9  
Z or  
above  
8200 mcd  
5860 mcd  
4180 mcd  
3000 mcd  
Y
X
W
520 nm  
525 nm  
530 nm  
535 nm  
Dominant Wavelength (λD)  
Important Notes:  
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.  
2. Pb content <1000 ppm.  
3. Tolerance of measurement of luminous intensity is ±15%.  
4. Tolerance of measurement of dominant wavelength is ±1 nm.  
5. Tolerance of measurement of VF is ±0.05 V.  
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu-  
ment.  
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.  
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED  
product safely.  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the  
Cree logo are registered trademarks of Cree, Inc.  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
2
CLD-CT39.000  
Graphs  
-10  
0
-40  
-30 -20  
-50  
Vr(V)  
If (mA)  
0.0  
100.0  
80.0  
-10.0  
-20.0  
60.0  
40.0  
20.0  
-30.0  
-40.0  
Vf(V)  
0.0  
-50.0  
3.0  
FIG.1 FORWARD CURRENT VS.  
FORWARD VOLTAGE.  
5.0  
Ir(uA)  
3.4  
3.8  
4.2  
4.6  
FIG.2 REVERSE CURRENT VS.  
REVERSE VOLTAGE.  
Half Power  
WL=38nm  
Domi WL= 527nm  
5.0  
4.0  
100%  
75%  
3.0  
50%  
25%  
2.0  
1.0  
WL(nm)  
400 500 600 700 800  
0%  
300  
If(mA)  
20.0 40.0 60.0 80.0 100.0  
0.0  
0.0  
FIG.4 RELATIVE LUMINOUS INTENSITY VS.  
WAVELENGTH.  
FIG.3 RELATIVE LUMINOUS INTENSITY VS.  
FORWARD CURRENT.  
H-H : 70  
50% Power Angle :  
V-V : 35  
IF(mA)  
50  
Ie(%)  
V-V  
H-H  
0
100%  
80%  
60%  
40  
30  
20  
10  
0
40%  
20%  
Ta( C)  
20.0 40.0 60.0 80.0 100.0  
0%  
-30  
0
90  
-90  
-60  
30  
60  
0.0  
FIG.5 MAXIMUM FORWARD DC CURRENT VS  
AMBIENT TEMPERATURE (Tjmax=105 C)  
FIG.6 FAR FIELD PATTERN  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the  
Cree logo are registered trademarks of Cree, Inc.  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
3
CLD-CT39.000  
Mechanical Dimensions  
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.  
An epoxy meniscus may extend about 1.5 mm down the leads.  
Burr around bottom of epoxy may be 0.5 mm max.  
Notes  
RoHS Compliance  
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or  
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the  
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-  
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment  
(RoHS), as amended through April 21, 2006.  
Vision Advisory Claim  
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the  
Cree logo are registered trademarks of Cree, Inc.  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
CLD-CT39.000  
Kit Number System  
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,  
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED  
Lamp Packaging Standard” document for more information about shipping and packaging options.  
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following  
manner:  
Standard/Custom  
0: Standard  
C: Custom  
VF  
0: Full forward voltage distribution  
1~9, A~Z . . . : special request *  
Wd/Color  
1: Full-color distribution  
2~9, A~Z . . . : special request *  
aaaaaaaaa-aaa-aa- x x x x x  
I
V0: Full luminous intensity distribution  
1~9, A~Z . . . : special request *  
Packing type  
0: Standard = Bulk pack  
1~9, A~Z . . . : special request *  
Product P/N  
* Contact your Cree sales representative for ordering information.  
Standard Available Kits*  
Kit Number  
Description  
5mm Oval 70 Green, Full Rank, Bulk Pack  
LO566EPG3-70G-A3-00001  
LO566EPG3-70G-A3-00002  
LO566EPG3-70G-A3-00003  
LO566EPG3-70G-A3-00012  
LO566EPG3-70G-A3-00013  
LO566EPG3-70G-A3-00024  
LO566EPG3-70G-A3-00025  
LO566EPG3-70G-A3-00026  
LO566EPG3-70G-A3-00034  
5mm Oval 70 Green, IV: Full Rank; Hue: X7-X8, Bulk Pack  
5mm Oval 70 Green, IV: Full Rank; Hue: X8-X9, Bulk Pack  
5mm Oval 70 Green, IV: X, Y; Hue: X7-X8, Bulk Pack  
5mm Oval 70 Green, IV: X, Y; Hue: X8-X9, Bulk Pack  
5mm Oval 70 Green, Consecutive 4Q Iv bins of min W; 1 Hue from X7-X9, Bulk Pack  
5mm Oval 70 Green, Consecutive 4Q Iv bins of min W; 1 Hue from X7-X8, Bulk Pack  
5mm Oval 70 Green, Consecutive 4Q Iv bins of min W; 1 Hue from X8-X9, Bulk Pack  
5mm Oval 70 Green, Consecutive 4Q Iv bins of min W3; 1 Hue from X7-X9, Bulk Pack  
* Please contact your Cree representative about the availability of non-standard kits.  
Cree, Inc.  
4600 Silicon Drive  
Durham, NC 27703  
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the  
Cree logo are registered trademarks of Cree, Inc.  
USA Tel: +1.919.313.5300  
www.cree.com/ledlamps  
5
CLD-CT39.000  

相关型号:

LO566EPG3-70G-A3-00034

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00001

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00002

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00012

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00013

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00024

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00025

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00026

Optoelectronic Device
CREE

LO566EPG3-70H-A3-00034

Optoelectronic Device
CREE

LO566NBL4-70G-MT

SPECIFICATION FOR COTCO LED LAMP
MARKTECH

LO566PBG4-70G-A3

Visible LED
CREE

LO566PBG4-70H-A

Ultra Bright Blue−Green Elliptical LED
MARKTECH