FCA14933 [CREE]
Saga series;型号: | FCA14933 |
厂家: | CREE, INC |
描述: | Saga series |
文件: | 总15页 (文件大小:1156K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT DATASHEET
Saga series
last update 1/12/2016
DETAILS
Product Number
Family
FCA14933_SAGA-S-WHT
Saga
Type
Pack
Color
white
Diameter
50 mm
13,7 mm
round
Height
Style
Optic Material
Holder Material
Fastening
Status
Silicone
screw
sample approved
Yes
ROHS Comliant
Date Updated
1/12/2016
OPTICAL PROPERTIES
Viewing
Angle
Light
Effi-
LED
Beam
Spot
Spot
Spot
Spot
Spot
Spot
ciency
94 %
94 %
cd/lm
2.700
1.650
Connector
CXA/B 15xx
26 deg
-
-
CXA/B 1816 & CXA/B 1820 & CXA 1850 34 deg
CXA/B 13xx
LC010C
sim: 15
sim: 30
sim: 36
sim: 44
sim: 94 % sim: 7.100 -
sim: 91 % sim: 3.400 Bender Wirth: 479 Typ L6
sim: 88 % sim: 2.200 Bender Wirth: 479 Typ L6
sim: 87 % sim: 1.400 Bender Wirth: 480 Typ L6
LC020C
LC040C
May 23rd 2017 5:31 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1
Ledil Oy
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
Salorankatu 10
24240 SALO, Finland
4
3
2
1
Isometric view
Scale: 1:1
9
13.
A
NOTES:
Maximum recommended tightening
torque for SAGA-FRAME is 0,4Nm
The final IP-rating is dependant of the whole
luminaire design and some solutions may need
additional potting or covering elements in order
to achieve desired level of protection. To
achieve fully sealed protection LEDiL recommends
to fasten SAGA holder directly on the heatsink.
A
INDEX PART NO DESCRIPTION MATERIAL COLOUR
Optical
grade LSR
1
F14908
C13591 SAGA-FRAME-WHT
Ledil Oy
SAGA-S
clear
2
HRPC
white
Tolerances if not otherwise shown
According to DIN ISO 2768-1
Linear measures:
Up to 30mm class M, otherwise class C.
According to DIN ISO 2768-2
Form and position: class L
Salorankatu 10
FIN 24240 SALO
Finland
THIRD ANGLE PROJECTION:
DRAWING TITLE
FCN14933_SAGA-S-WHT
This drawing is the property
of LEDiL Oy. It may not be
reproduced, copied or
SIZE PART NUMBER
communicated without a written
agreement with LEDiL Oy.
A4
SAGA-S-WHT
SCALE 1:1 WEIGHT 19,69 g
SHEET 1/1
D
A
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
GENERAL INFORMATION
- Product series especially designed & optimized for series of LEDs.
- Special care taken to make light distribution as uniform as possible.
Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly
recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL
products being used outside of the recommended temperature range.
相关型号:
©2020 ICPDF网 联系我们和版权申明