OH200-70603CV-012.8M [CONNOR-WINFIELD]
CMOS Output Clock Oscillator, 12.8MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5;
| 型号： | OH200-70603CV-012.8M |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | CMOS Output Clock Oscillator, 12.8MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5 机械 振荡器 |
| 文件： | 总4页 (文件大小：461K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Available at Digi-Key**
www.digikey.com
Stratum 3E High Stability
Oven Stabilized Oscillator
OH200-Series
OCXO / VCOCXO
Description
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
Connor-Winfield’s high stability OH200-
series are exceptionally precise frequency
standards, excellent for use in cellular base
stations, test equipment, Synchronous
Ethernet, VSAT and Stratum 3E applications
These unique OCXO / VCOCXO oscillator
products provide temperature stabilities
in the range of ±3 ppb to ±25 ppb, over
the commercial, extended commercial or
the industrial temperature range. Power
requirements are 3W over the commercial
temperature range and 4.5W over the
industrial temperature range. Additionally,
excellent aging is achieved through the use
of overtone SC cut crystals.
O
H
200
12.8 -61
003C
www.conwin.com
1234567890
MHz
1
232
F
1
2
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Features
•ꢀFrequencyꢀRange:ꢀ5.0ꢀtoꢀ40.0ꢀMHz
•ꢀOCXOꢀ-ꢀFixedꢀFrequency
•ꢀVCOCXOꢀ-ꢀVoltageꢀControlledꢀOption
•ꢀ3.3ꢀVdc,ꢀ5.0ꢀVdcꢀorꢀ12.0ꢀVdcꢀOperation
•ꢀAvailableꢀFrequencyꢀStabilities:ꢀ
ꢀ ꢀ ±3ꢀppb,ꢀ±5ꢀppb,ꢀ±10ꢀppbꢀorꢀ±25ꢀppb
•ꢀAvailableꢀTemperatureꢀRanges:ꢀ
ꢀ ꢀ 0ꢀtoꢀ70°C,ꢀ-20ꢀtoꢀ70°C,ꢀ-40ꢀtoꢀ70°Cꢀorꢀ-40ꢀtoꢀ85°C
The OH200 series is available with
CMOS logic or Sinewave output along with
Voltage Controlled option. These oscillators
provide outstanding phase noise that varies
depending on frequency. Frequencies are
available from 5.0 to 40.0 MHz. Allan Variance
specifications are rated for primary reference
standards. Warm up times are on the order of
5 minutes to 0.10 ppm of final frequency.
•ꢀLowꢀPhaseꢀNoiseꢀ/ꢀPhaseꢀJitter
•ꢀAvailableꢀOutputs:ꢀCMOSꢀorꢀSinewave
•ꢀPackage:ꢀ1.1"ꢀxꢀ1.4"ꢀxꢀ0.5"ꢀ(CO-8)
•ꢀRoHSꢀCompliantꢀ/ꢀLeadꢀFree
ꢀꢀ**ꢀNotꢀallꢀ
ꢀ
ꢀ
availableꢀatꢀ
Digi-Key
Ordering Information
-
OH200
6
10
03
C
F
-ꢀ012.8M
Output Frequency
Package
Temperature
Range
Frequency
Stability
Supply Voltage Output Type
OCXO Type
Frequency Format
-xxx.xM Min
OH200- = 1.1x1.4 CO8
06 = ±± ppb
10 = ±5 ppb
20 = ±10 ppb
50 = ±25 ppb
0± = ±.± Vdc
05 = 5.0 Vdc
12 = 12.0 Vdc
C = CMOS
S = Sinewave
F = Fixed
Freq.
V = Voltage
5 = 0 to 70°C
-xxx.xxxxxxM Max
ꢂAmount of
6 = -40 to 85°C
7 = -20 to 70°C
8 = -40 to 70°C
Controlled numbers after the
Option
decimal point.
M = MHz
{±ꢀFmax-Fminꢁ)ꢀ2ꢂFoꢁꢃ
Example Part Number:
ꢀ OH200-61003CF-012.8Mꢀ=ꢀ1.1"ꢀxꢀ1.4"ꢀxꢀ0.5"ꢀCO-8ꢀpackage,ꢀ-40ꢀtoꢀ85°Cꢀtemperatureꢀrange,ꢀ±5.0ꢀppbꢀfrequencyꢀstability,ꢀ3.3ꢀVdcꢀsupplyꢀꢀ
ꢀ
ꢀ voltage,ꢀCMOSꢀsquareꢀwaveꢀoutput,ꢀfixedꢀfrequencyꢀOCXO,ꢀ12.8ꢀMHzꢀoutputꢀfrequency.
ꢀ ToꢀorderꢀaꢀOH200-61003CFꢀwithꢀanꢀoutputꢀfrequencyꢀof:ꢀ6.4ꢀMHzꢀ=ꢀOH200-61003CF-006.4M
ꢀ ToꢀorderꢀaꢀOH200-61003CFꢀwithꢀanꢀoutputꢀfrequencyꢀofꢀ16.384ꢀMHzꢀ=ꢀOH200-61003CF-016.384M.
ꢀ OH200-712005SV-040.0Mꢀ=ꢀ1.1"ꢀxꢀ1.4"ꢀxꢀ0.5"ꢀCO-8ꢀpackage,ꢀ-20ꢀtoꢀ70°Cꢀtemperatureꢀrange,ꢀ±10.0ꢀppbꢀfrequencyꢀstability,ꢀ5.0ꢀVdcꢀsupplyꢀꢀ
ꢀ
ꢀ voltage,ꢀSinewaveꢀoutput,ꢀvoltageꢀcontrolledꢀoutputꢀfrequencyꢀVCOCXO,ꢀ40ꢀMHzꢀoutputꢀfrequency.
Bulletin
Cx193
1 of 4
Page
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/technologies.html
Revision
12
Date
19 Nov 2013
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Parameterꢀ
Minimumꢀ
Nominalꢀ
Maximumꢀ
125
Unitsꢀ
°C
Vdc
Vdc
Vdc
Vdc
Vdc
Notes
Storage Temperature
-55
-
-
-
Supply Voltage ꢀVccꢁ
Control Voltage ꢀVcꢁ
Operating Supply Voltage ±.± Vdc ꢀVccꢁ
Operating Supply Voltage 5.0 Vdc ꢀVccꢁ
Operating Supply Voltage 12 Vdc ꢀVccꢁ
-0.5
-0.5
±.1±
4.75
1±.5
7.0
±.±0
5.00
12.00
±.47
5.25
11.40
12.60
AbsoluteꢀRatings:ꢀStressesꢀbeyondꢀthoseꢀlistedꢀunderꢀ"absoluteꢀmaximumꢀratings"ꢀmayꢀcauseꢀpermanentꢀdamageꢀtoꢀtheꢀdevice.ꢀTheseꢀareꢀstressꢀratingsꢀonly.ꢀTheꢀfunctionalꢀ
operationꢀofꢀtheꢀdeviceꢀatꢀthoseꢀorꢀanyꢀotherꢀconditionsꢀbeyondꢀthoseꢀindicatedꢀunderꢀ"recommendedꢀoperatingꢀconditions"ꢀisꢀnotꢀimplied.ꢀExposureꢀtoꢀconditionsꢀoutsideꢀtheꢀ
"recommendedꢀoperatingꢀconditions"ꢀforꢀanyꢀextendedꢀperiodꢀofꢀtimeꢀmayꢀadverselyꢀimpactꢀdeviceꢀreliabilityꢀandꢀresultꢀinꢀfailuresꢀnotꢀcoveredꢀbyꢀwarranty.
Operating Specifications
Parameterꢀ
Minimumꢀ
Nominalꢀ
Maximumꢀ
Unitsꢀ
Notes
Center Frequency: ꢀFoꢁ
Operating Temperature Range:
Temperature Code 5
Temperature Code 6
Temperature Code 7
Temperature Code 8
Frequency Calibration:
Frequency Stability vs. Change in Temperature:
Stability Code 06
5.0
-
40.0
MHz
0
-
-
-
-
-
70
85
70
70
0.1
°C
°C
-40
-20
-40
-0.1
°C
°C
ppm
@ 25°C
-±.0
-5.0
-
-
-
-
-
-
±.0
5.0
ppb
ppb
ppb
ppb
ppb
ppb
1
1
Stability Code 10
Stability Code 20
-10.0
-25.0
-5.0
10.0
25.0
5.0
1
Stability Code 50
1
Frequency Stability vs. Load
Frequency Stability vs. Voltage
Aging: Daily:
±5ꢄ
±5ꢄ
-5.0
5.0
5 MHz to 20 MHz
-1.0
-2.0
-
-
1.0
2.0
ppb)day
ppb)day
2
2
>20 MHz to 40 MHz
Aging: First Year:
5 MHz to 20 MHz
-50
-100
-
-
50
100
ppb
ppb
>20 MHz to 40 MHz
Lifetime Tolerance: ꢀ20 Yearsꢁ
5 MHz to 20 MHz-
-±00
-500
-
-
±00
500
ppb
ppb
±
±
>20 MHz to 40 MHz
Supply Voltage: ꢀVccꢁ
Voltage Code 0±
±.1±
4.75
11.40
±.±0
5.00
12.00
±.47
5.25
12.60
Vdc
Vdc
Vdc
4
4
4
Voltage Code 05
Voltage Code 12
Power Consumption: Turn-On
0 to 70°C Models
-
-
-
-
-
-
-
-
±.00
±.20
±.±0
±.80
W
W
W
W
5
5
5
5
-20 to 70°C Models
-20 to 75°C Models
-40 to 85°C Models
Power Consumption: Steady State @ 25°C
0 to 70°C Models
-
-
-
-
-
-
-
-
1.10
1.10
1.20
1.50
W
W
W
W
5
5
5
5
-20 to 70°C Models
-20 to 75°C Models
-40 to 85°C Models
Phase Jitter: ꢀBW: 10 Hz to Fo)2ꢁ
Models with Fo: 5 MHz to 20 MHz
Models with Fo: >20 MHz to 40 MHz
Short Term Allan Deviation ꢀ1sꢁ
Start-Up Time:
-
-
-
-
-
-
1.0
2.0
-
500
5
ps rms
ps rms
rms
-
1.0E-11
-
-
ms
Warm Up Time @ 25°C:
minutes
6
Notes:
1. Frequency stability vs. change in temperature [±(Fmax-Fmin)/(2*Fo)].
2. At time of shipment after 48 hours of operation.
3. Inclusive of calibration, operating temperature, supply voltage change, load change and 20 years aging.
4. Supply voltage must reach Vcc levels monotonically within a ramp-up time of <12 ms.
5. Measured with Vcc = Nominal, in calm air.
Bulletin
Page
Cx193
2 of 4
12
6. Measured @ 25°C, within 5 minutes, referenced one hour after turn-on.
7. To ensure proper operation of VCOCXO, the control voltage input must be biased the nominal control voltage. Failure to bias
the Vc input will cause an unstable output condition.
Revision
Date
19 Nov 2013
Specificationsꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotification.ꢀSeeꢀConnor-Winfield'sꢀwebsiteꢀforꢀlatestꢀrevision.ꢀꢀAllꢀdimensionsꢀinꢀinches.ꢀꢀ
© Copyright 2014The Connor-Winfield CorporationꢀꢀꢀꢀNotꢀintendedꢀforꢀlifeꢀsupportꢀapplications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Characteristics
ꢀTypicalꢀPhaseꢀNoiseꢀforꢀOH100-seriesꢀwithꢀCMOSꢀOutputꢀꢀ
ꢀ
ꢀ ꢀ
ꢀ
Parameterꢀ
SSBꢀPhaseꢀNoiseꢀ
@1Hz offset
ꢀ
5ꢀ-ꢀ12ꢀMHzꢀ
-85
ꢀ
ꢀ
ꢀ
Unitsꢀ
Notes
>12-ꢀ20ꢀMHzꢀ >20ꢀ-ꢀ30ꢀMHzꢀꢀꢀꢀꢀꢀꢀꢀ>30ꢀ-ꢀ40ꢀMHzꢀ
-80
-70
-65
-95
-120
-140
-150
-150
dBc)Hz
dBc)Hz
dBc)Hz
dBc)Hz
dBc)Hz
dBc)Hz
@ 10Hz offset
-115
-140
-145
-150
-110
-1±5
-140
-150
-150
-100
-125
-140
-150
-150
@ 100Hz offset
@ 1KHz offset
@ 10KHz offset
@ 100KHz offset
-150
Input Characteristics - Voltage Controlled Option (OCXO Type Code V)
Parameterꢀ
Minimumꢀ
Nominalꢀ
Maximumꢀ
Unitsꢀ
Notes
Control Voltage Range:
±.± Vdc Models
5.0 Vdc Models
0.±0
0.50
0.50
1.65
2.50
2.50
±.00
4.50
4.50
V
V
V
Vcc = ±.± Vdc
Vcc = 5.0 Vdc
Vcc = 12.0 Vdc
12.0 Vdc Models
Frequency Pullability:
Models with Fo 5 to 20 MHz
Models with Fo >20 to 40 MHz
Input Impedance
±0.4
±0.6
100K
-
-
-
-
-
-
ppm
ppm
Ohms
7
7
CMOS Output Characteristics (Output Code C)
Parameterꢀ
Minimumꢀ
Nominalꢀ
Maximumꢀ
Unitsꢀ
pF
Notes
Load
-
15
-
Output Voltage:
±.± Vdc Models High ꢀVohꢁ
±.0
-
4.7
-
4.7
-
45
-
-
-
-
-
-
-
50
-
-
-
V
V
V
Low ꢀVolꢁ
0.4
-
5.0 Vdc Models High ꢀVohꢁ
Low ꢀVolꢁ
0.4
-
0.4
55
6
12.0 Vdc Models High ꢀVohꢁ
Low ꢀVolꢁ
Duty Cycle at 50ꢄ of Vcc
Rise ) Fall Time: 10ꢄ to 90ꢄ
Spurious Output
ꢄ
ns
dBc
-
-80
Sinewave Output Characteristics (Output Code S)
Parameterꢀ
Load
Output Power
Harmonics
Spurious
Minimumꢀ
Nominalꢀ
Maximumꢀ
Unitsꢀ
Ohms
dBm:
dBc
Notes
-
5.0
-
50
-
-
-
-
-±0
-80
-
-
dBc
Package Characteristics
Hermetically sealed, resistive welded package with grounded case.
OH200 Package
Environmental Characteristics
Shock
500 G’s 1ms, Halfsine, ± shocks per direction, per MIL-STD 202G, Method 21±B Test Condition D.
0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202G, Method 204D, Test Condition A.
5.±5 G’s rms. 20 to 2000 Hz per MIL-STD-202G, Method 214,Test Condition 1A, 15 minutes each axis.
10 cycles, 95ꢄ RH, Per MIL-STD-202G, Method 112.
Sinusoidal Vibration
Random Vibration
Moisture
Marking Permanency
Attachment Method PCB
Resistance to Solder Heat
Solder Process
Per MIL-STD-202G, Method 215J.
Through Hole Mounted
Per MIL-STD-202G, Method 210, Condition E.
RoHS compliant, lead free. See solder profile.
Bulletin
Cx193
3 of 4
Page
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/technologies.html
Revision
Date
12
19 Nov 2013
Specificationsꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotification.ꢀSeeꢀConnor-Winfield'sꢀwebsiteꢀforꢀlatestꢀrevision.ꢀꢀAllꢀdimensionsꢀinꢀinches.ꢀꢀ
© Copyright 2014The Connor-Winfield CorporationꢀꢀꢀꢀNotꢀintendedꢀforꢀlifeꢀsupportꢀapplications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Re stabilization Time
Re stabilization Time
Off Time
<1 Hour
<6 Hour
<2 Hours ꢂ
<12 Hours ꢂ
<24 Hour
1 to 16 Days
>16 Days
<48 Hours ꢂ
48 Hours + 1)4 Off Time ꢂ
<6 Days ꢂ
*ꢀForꢀaꢀgivenꢀoffꢀtime,ꢀtheꢀtimeꢀrequiredꢀtoꢀmeetꢀdailyꢀaging,ꢀshortꢀtermꢀstabilityꢀandꢀTEVꢀrequirements.
Package Outline
Package Marking
Pin Connections
0.500
12.70mm
Max.
PinꢀꢀConnection
1:ꢀ VoltageꢀControlꢀorꢀN/C
2:ꢀ N/C
3:ꢀ SupplyꢀVoltageꢀ(Vcc)
4:ꢀ Output
0.035 Dia.
1232
0.88mm Dia.
0.025
0.635mm
Date Code (YYWW)
0.244
6.2mm
OH200-61003CF
12.8 MHz
Model Number
Output Frequency
Serial # Barcode
Serial Number
1.417
36mm
123456789012
123456789012
5:ꢀ Groundꢀ(Case)
5
1
2
3
1.063
27mm
0.700
Pin 1
Bottom View
4
0.350
8.9mm
17.78mm
KeepꢀOutꢀArea:ꢀUnderꢀtheꢀOCXOꢀisꢀaꢀkeepꢀoutꢀarea,ꢀdoꢀnotꢀplaceꢀanyꢀpartsꢀinꢀthisꢀarea.
0.700
17.78mm
1.000
Solder Profile
25.4mm
Temperature
260°C
260°C
Test Circuit
220°C
180°C
150°C
120°C
Output
Vcc
Vcc
10 uF
to
100 uF
N/C
0.01 uF
15 pF
Total Output Load
0
Voltage
10 s
Ground
Control
or
N/C
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
CMOS Output Waveform
Revision History
Revisionꢀ
Dateꢀ
10)16)09
02)09)10
0±)29)10
04)05)10
05)19)11
07)27)11
09)08)11
01)2±)12
0±)21)12
08)22)12
12)07)12
05)1±)1±
11)15)ꢂ1±
Changes
New release
00
01
02
0±
04
05
06
07
08
09
10
11
12
90%
50%
10%
Added -20 to 75C and 50ppb stability.
Changed 75C to 70C
Added 8 = -40 to 70C temperature code.
Corrected temperature on page 2, from -20 to 80c to -40 to 70C
Updated power consumption
Added sinewave models to the data sheet
Changed package height from 0.5±0" to 0.500"
Changed frequency stability from "Absolute" to "+)-" with note 1 added as reference
Changed marking to Label marking.
Added application note information.
Changed note 4 and removed note from power supply line. and added absolute note.
Added Voltage Controlled Option.
Bulletin
Cx193
4 of 4
12
Page
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/technologies.html
Revision
Date
19 Nov 2013
Specificationsꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotification.ꢀSeeꢀConnor-Winfield'sꢀwebsiteꢀforꢀlatestꢀrevision.ꢀꢀAllꢀdimensionsꢀinꢀinches.ꢀꢀ
© Copyright 2014The Connor-Winfield CorporationꢀꢀꢀꢀNotꢀintendedꢀforꢀlifeꢀsupportꢀapplications.
相关型号：
OH200-70603SF-FREQ2
Sine Output Oscillator, 20MHz Min, 40MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-70612CF-005.0M
CMOS Output Clock Oscillator, 5MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-71012SF-040.0M
Sine Output Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-71012SF-FREQ1
Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-71012SV-020.0M
Sine Output Oscillator, 20MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-75003SV-020.0M
Sine Output Oscillator, 20MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-75003SV-FREQ1
Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-75005SV-FREQ1
Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-80603CF-005.0M
CMOS Output Clock Oscillator, 5MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-80605CF-005.0M
CMOS Output Clock Oscillator, 5MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
OH200-81012SV-020.0M
Sine Output Oscillator, 20MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明