D53G-020M [CONNOR-WINFIELD]
Precision 5.0x 3.2mm TCXO Model D53G;
| 型号： | D53G-020M |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | Precision 5.0x 3.2mm TCXO Model D53G 石英晶振 温度补偿晶振 |
| 文件： | 总3页 (文件大小：624K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Available at Digi-Key
www.digikey.com
Precision
5.0x 3.2mm TCXO
Model D53G
Features:
Description:
• 3.3 Vdc Operation
The Connor-Winfield D53G is a 3.3V
Clipped Sinewave, Surface Mount,
Temperature Compensated Crystal
Oscillator (TCXO) designed for applications
requiring tight frequency stability. The
RoHS compliant surface mount package is
designed for high-density mounting and is
optimum for mass production.
2111 Comprehensive Drive
e
• Clipped Sinewave Output
• Frequency Stability: 0.50 ppm
• Temperature Range: -30 to 85°C
• Low Jitter <1ps RMS
• 5.0x3.2mm SMT Package
• Tape and Reel Packaging
• RoHS Compliant, Lead Free
D
26
53G
Aurora, Illinois 60505
1
5
26
.0
M
HZ
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
US Headquarters:
630-851-4722
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage (Vcc)
Minimum
-55
Nominal
Maximum
85
Vcc+0.5
Units
°C
Vdc
Notes
Notes
European Headquarters:
+353-61-472221
-
-
-0.5
Operating Specifications
Minimum
Parameter
Nominal
20.0 or 26.0
Maximum
-
Units
MHz
ppm
ppm
ppm
ppm
ppm
ppm
ppm/year
°C
Vdc
mA
ps rms
ps rms
Center Frequency (Fo)
Freq. Stability vs. Cal. @ 25°C
Freq. Stability vs. Temp.
Freq. Stability vs. Voltage
Freq. Stability vs. Load
Static Temperature Hysteresis
Freq. shift after reflow soldering
Aging
-
-1.0
-0.50
-0.25
-0.25
-
-1.0
-1.0
-30
3.135
-
-
-
-
-
-
-
-
1.0
1
2
5ꢀ
5ꢀ
3
0.50
0.25
0.25
0.40
1.0
1.0
85
3.465
2
5
4
Operating Temperature Range:
Supply Voltage (Vcc)
Supply Current (Icc)
Period Jitter
-
3.3
-
3
5ꢀ
5
-
-
Integrated Phase Jitter
SSB Phase Noise Fo =20 MHz
10Hz offset
0.5
1.0
-
-
-
-
-
-
-80
-110
-130
-145
-150
-
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
100Hz offset
-
1KHz offset
-
10KHz offset
-
100KHz offset
-
Start-up Time
5
Clipped Sinewave Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
V pk-pk
Ohm
Notes
Output Voltage
Load Resistance
Load Capacitance
1.0
-
-
-
-
6
-
-
10K
10
pF
7
Package Characteristics
Package
Hermetically sealed ceramic package and metal cover
Environmental Characteristics
Vibration:
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 2.
Shock:
Soldering Process;
Ordering Information
D53G-020.0M* or D53G-026.0M*
* For the tape and reel option, add -T to the end of the part number. Example: D53G-020.0M-T
Notes:
1. Frequency Calibration; frequency measured at Vcc = 3.3 Vdc, 25°C, referenced to Fo.
2. Frequency stability vs. change in temperature. [± ±Fmaꢀ ꢁ Fminꢂ)2.Fo].
3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C.
4. Within two hours after reflow soldering
5. BW=12K Hz to 20 MHz.
6. Output is DC coupled
Bulletin
TX239
1 of 3
Page
Revision
04
Date
25 June 2015
7. For best performance it is recommended that the circuit connected to this output should have an equivalent input capacitance of 10 pF.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Suggested Pad Layout
To
Pad Connections
1:N/C
2:Do Not Connect
3:Do Not Connect
4:Ground
Package Layout
Output
0.028
(0.71mm)
0.065
(1.65mm)
0.028
(0.71mm)
0.126
(3.2mm)
0.083 Max.
0.006 Typ.
(2.1mm)
(0.15mm)
0.042
(1.07mm)
0.016
(0.41mm)
0.053
(1.35mm)
Keep
Out
Area*
5
4
5:Output
6:Do Not Connect
7:Do Not Connect
8:Supply Voltage (Vcc)
0.197
(5.0mm)
0.050
(1.27mm)
Top
View
0.098
(2.49mm)
0.028
(0.71mm)
External
Bypass
Capacitor
0.1 uF
&
Pad 8
Pad 1
1
8
0.042
(1.07mm)
0.008 Typ.
Top
View
(0.20mm)
0.050
(1.27mm)
Bottom
View
Dimensional Tolerance:
10 nF
+/-0.005 (+/-0.127mm)
0.050
(1.27mm)
To
Ground
* Keep Out Area: Do not route any traces in the
keep out area. It is recommended the next layer
under the keep out area is to be ground plane.
Test Circuit
DNC
DNC
Marking for 20.0MHz
AC Coupling
Capacitor
Output
Vcc
Supply
Voltage
7
6
5
8
1
10 pF**
10Kohm
.01 uF
Bypass
4
3
2
N/C
DNC
DNC
DNC = Do Not Connect
**NPO Grade Component
Output Waveform
0
Marking for 26.0MHz
200 mV/Div
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
Bulletin
Page
TX239
2 of 3
04
Revision
Date
25 June 2015
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2015 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Plot
Model D53G-020.0MHZ
Tape and Reel Information
Meets EIAi481A and EIAJ-1009B
2000 Pieces per Reel
Revision History
Revision
Revision Date
Note
01
02
03
04
11/14/08
01/03/11
11/16/12
06/24/15
New release GD 11/14/08
Updated to new data sheet format
Updated Phase noise information.
Added Marking Information
Bulletin
TX239
3 of 3
Page
Revision
04
Date
25 June 2015
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2015 The Connor-Winfield Corporation Not intended for life support applications.
相关型号：
D53G-026.0M-T
Clipped Sine Output Oscillator, 26MHz Nom, ROHS COMPLIANT, HERMETICALLY SEALED, CERAMIC PACKAGE-8
CONNOR-WINFIE
D53G-026.0MHZ
Clipped Sine Output Oscillator, 26MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, 8 PIN
CONNOR-WINFIE
D53G-026.0MHZ-T
Clipped Sine Output Oscillator, 26MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, 8 PIN
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明