5216 [CONNOR-WINFIELD]
2.8V LVCMOS Surface Mount Crystal Clock Oscillator; 2.8V LVCMOS表面贴装晶体时钟振荡器
| 型号： | 5216 |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | 2.8V LVCMOS Surface Mount Crystal Clock Oscillator |
| 文件： | 总2页 (文件大小：82K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.8V LVCMOS Surface Mount
Crystal Clock Oscillator
5216
XO
Features:
The Connor-Winfield models 5216, 5226,
and 5236 are 7.5mm x 5mm, 2.8V LVCMOS,
Surface Mount, Fixed Frequency Crystal
Oscillators (XO) designed for use in all
applications requiring precision clocks. This
oscillator features low stand-by current
(10uA) when the output is disabled. The
RoHS compliant, surface mount package is
designed for high-density mounting and is
optimum for mass production.
1.8 to 80 MHz
2111 Comprehensive Drive
2.8V Operation
Aurora, Illinois 60505
RoHS Compliant
Phone: 630-851-4722
Tri-State Enable / Disable Function
Fax: 630- 851- 5040
Overall Frequency Tolerance:
5216 ± 25 ppm, 5226 ± 50 ppm,
5236 ± 100 ppm
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Temperature Range: -40 to 85°C
Power Saving Stand-By Current
Ceramic Surface Mount Package
Tape and Reel Packaging
Absolute Maximum Ratings
Parameter
Minimum
-55
Nominal
Maximum
125
Units
°C
Vdc
Notes
Storage Temperature
Supply Voltage (Vcc)
-
-
-0.5
7.0
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
MHz
ppm
Notes
Frequency Range (Fo)
1.8
-
-
80
Frequency Tolerance
1
5216
5226
5236
-25
-50
25
50
-100
100
Operating Temp Range
Supply Voltage (Vdd)
-40
2.66
-
85
2.94
°C
Vdc
2.8
Supply Current (Icc)
1.8 to 31.999 MHz
32 to 50 MHz
-
-
-
-
12
20
mA
Input Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Vdc
Vdc
nS
nS
uA
Notes
Enable Voltage - (Vih)
Disable Voltage - (Vil)
Enable Time
Disable Time
Output Disable Current (lcc)
≥ 70% Vdd
-
-
-
-
-
-
≤ 30% Vdd
10
2
-
-
-
-
150
10
HCMOS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load
-
-
15
pF
High (Voh)
Voltage
2.39
-
-
-
-
Vdc
Low (Vol)
0.29
High (loh)
Current
-4
-
-
-
-
mA
Low (lol)
4
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start-Up Time
45
50
55
5
10
5
%
nS
mS
-
-
-
-
-
-
Bulletin
Sm074
Jitter
pS RMS
Page
1 of 2
Notes:
Revision
1. Inclusive of calibration @ 25°C , frequency vs temperature stability, supply voltage change, load change, shock and vibration, 10 years aging.
2. Oscillator requires a pull up resistor from pin 1 to Vcc to insure proper operation.
01
Date
01 April 2002
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
www.conwin.com
Package Characteristics
Hermetically sealed ceramic package and metal cover
Suggested Pad Layout
Package
Environmental Characteristics
Temperature Cycle
The specimen shall meet electrical characteristics after
tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes
Hermetical
No bubbles appear in Flourinert (FC-43) at 125°C 5°C for 5 minutes
Solvent Resistance
Marking will withstand immersion in
Isopropyl Alcohol or Trichloroethylene
Soldering
Bypass capacitor, C-by, should be
General Conditions 260°C max x 10 sec max x 2 times max or
ceramic capacitor ≥ .01 uf
230°C max x 180 sec max x 1 time
Test Circuit
Typical Operation Data
(Vapor phase reflow)
20 to 100 sec up to 215°C, 50 sec
OSCILLOSCOPE
at 215°C, then down to room temperature per 1 to 5°C / sec
PROBE
POWER
SUPPLY
Mechanical Characteristics
Free Drop
Vibration
The specimen shall meet electrical characteristics after tested 3 times,
OSC
Free Drop testing on the hard wooden board from a height of 75 cm.
The specimen shall meet electrical characteristics after tested
by the following conditions: 10-55Hz 1.5mm Amplitude,
55-2000 Hz 20 G's, 2 hours for each plane
FREQ
COUNTER
INPUT FOR E/D
Thermal Shock
Solderability
After applied Thermal Shock of 260°C
max x 10 sec max x 2 times, or 230°C max x 180 sec max,
the specimen shall meet electrical characteristics
OutputWaveform
(EIAJ-RCX-0102.101 Condition 1a)
1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%)
2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%)
3) Solder bath temperature: 235°C 5°C
4) Depth of immersion: Up to electrical terminal
5) Immersing time: Within 2 sec 0.5 sec into solder bath
After performing the above procedures, a newly soldered coverage shall be greater than 90%
SYMMETRY
Pin Connections
1: Enable/Disable
2: Ground
3: Output
4: Vcc
Tape and Reel Dimensions
Ordering Information
5216
- 80.00 MHz
CLOCK
SERIES
CENTER
FREQUENCY
Dimensional Tolerance: ±.02" (.508mm)
±.005"(.127mm)
Bulletin
Page
Sm074
2 of 2
Revision
Date
01
Meets EIA-481A and EIAJ-1009B
2,000 PCS/Reel
01 April 2002
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
相关型号：
5216-170.0M
LVCMOS Output Clock Oscillator, 170MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
CONNOR-WINFIE
5216-H-ABC0-D-E
IEC Appliance Outlet J, Screw-on Mounting, Front Side, Quick-connect Terminal
SCHURTER
5216-X-9990-A-1
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
5216-X-9990-B-1
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
5216-X-9990-B-2
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
5216-X-9990-D-1
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
5216-X-9990-D-2
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
5216-X9990-C-1
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
5216-X9990-C-2
Mains Power Connector, 16/21A, 250VAC, Female, Solder Terminal, ROHS COMPLIANT
SCHURTER
©2020 ICPDF网 联系我们和版权申明