ATV15C111J-G [COMCHIP]

Trans Voltage Suppressor Diode,;
ATV15C111J-G
型号: ATV15C111J-G
厂家: COMCHIP TECHNOLOGY    COMCHIP TECHNOLOGY
描述:

Trans Voltage Suppressor Diode,

二极管
文件: 总6页 (文件大小:128K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SMD Transient Voltage Suppressor  
ATV15C5V0-G Thru. ATV15C441-G  
Working Peak Reverse Voltage: 5.0 to 440 Volts  
Power Dissipation: 1500Watts  
RoHS Device  
Features  
SMC/DO-214AB  
- Glass passivated chip.  
- 1500W peak pulse power capability with a 10/1000µs  
waveform, repetitive rate (duty cycle):0.01%  
0.281(7.15)  
0.260(6.60)  
- Low leakage.  
0.126(3.20)  
0.114(2.90)  
0.238(6.04)  
0.219(5.55)  
- Uni and Bidirectional unit.  
- Excellent clamping capability.  
- Very fast response time.  
- Comply with AEC-Q101  
0.313(7.95)  
0.305(7.75)  
0.012(0.30)  
0.006(0.15)  
R
- UL recognized file # E349157  
- Range: ATV15C5V0J(B) thru. ATV15C101J(B)  
0.100(2.53)  
0.078(1.98)  
0.008(0.20)  
0.000(0.00)  
0.059(1.51)  
0.030(0.75)  
Mechanical Data  
- Case: DO-214AB/SMC molded plastic.  
Dimensions in inches and (millimeter)  
- Epoxy: UL 94V-0 rate flame retardant  
- Terminals: Solderable per MIL-STD-750, method 2026.  
Circuit Diagram  
- Polarity: Color band denoted cathode  
end except bipolar.  
Bi-directional  
Uni-directional  
- Weight: 0.230 gram (approx.)  
Maximum Ratings and Electrical Characteristics  
Rating at 25°C ambient temperature unless otherwise specified.  
Single phase, half wave, 60Hz, resistive or inductive load.  
For capacitive load, derate current by 20%.  
Symbol  
Characteristics  
Value  
1500  
Units  
Peak power dissipation with a 10/1000μs  
waveform (Note 1)  
PPP  
IPP  
W
A
Peak pulse current with a 10/1000μs  
waveform (Note 1)  
See Next Table  
6.5  
Power dissipation on infinite heatsink  
at TL=75°C  
PD  
W
A
Peak forward surge current, 8.3ms single  
half sine-wave uni-directional only  
IFSM  
200  
(Note 2)  
Maximum instantaneous forward voltage  
VF  
3.5/5.0  
V
at 100A for uni-directional only  
(Note 3)  
Operation junction and storage  
temperature range  
TJ, TSTG  
-55 to +150  
°C  
1. Non-repetitive current pulse, per Fig.5 and derated above TA=25°C, per Fig.1  
Notes:  
2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.  
3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V  
Company reserves the right to improve product design , functions and reliability without notice.  
REV: C  
Page 1  
AQW-BTV05  
Comchip Technology CO., LTD.  
SMD Transient Voltage Suppressor  
Ratings and Characteristics Curve (ATV15C5V0-G Thru. ATV15C441-G)  
Fig.1 - Pulse Derating Curve  
Fig.2 - Max. Non-Repetitive Surge Current  
200  
100  
75  
8.3mS single half  
sine-wave (JEDEC method)  
TJ=TJ , max.  
160  
120  
80  
50  
25  
0
40  
0
100  
0
25  
50  
75 100 125 150 175  
1
10  
Ambient Temperature, (°C )  
Number of Cycles at 60Hz  
Fig.3 - Steady State Power Derating Curve  
Fig.4 - Peak Pulse Power Rating Curve  
7
6
5
4
3
2
1
100  
10  
1.0  
0.1  
0
0.1  
1
10  
100  
1000  
10000  
0
25  
50  
75  
100 125 150 175  
Pulse Width, (μs)  
Lead Temperature, (°C )  
Fig.6 - Typical Junction Capacitance  
Fig.5 - Pulse Waveforem  
100000  
10000  
1000  
100  
TJ = 25°C  
TR=10μs  
Pluse width(td) is defined as the  
point where the peak current  
decays to 50% of Ipp  
Bi-directional  
@zero bias  
100  
50  
0
Peak value  
(Ipp)  
Uni-directional  
@zero bias  
Ipp  
2
Half Value=  
Uni-directional  
@VRWM  
10 / 1000μsec. waveform  
as defined by R.E.A.  
10  
Bi-directional @ VRWM  
td  
TJ=25°C  
f=1.0MHz  
1
1
10  
100  
1000  
0
1.0  
2.0  
Time, (ms)  
3.0  
4.0  
Reverse Breakdown Voltage, (V)  
Company reserves the right to improve product design , functions and reliability without notice.  
REV: C  
Page 2  
AQW-BTV05  
Comchip Technology CO., LTD.  
SMD Transient Voltage Suppressor  
Electrical Characteristics (ATV15C5V0-G Thru. ATV15C441-G)  
Working  
Peak  
Reverse  
Voltage  
Maximum  
Reverse  
Leakage  
@VRWM  
IR (uA)  
Maximum  
Reverse  
Surge  
Current  
IPP (A)  
Maximum  
Clamping  
Voltage  
@IPP  
Device  
Marking  
Code  
Breakdown voltage  
VBR @ IT  
Part No.  
Min.  
Max.  
(V)  
IT  
UNI  
BI  
(V)  
(mA)  
VRWM (V)  
VC (V)  
ATV15C5V0J(B)-G  
ATV15C6V0J(B)-G  
ATV15C6V5J(B)-G  
ATV15C7V0J(B)-G  
6.40  
6.67  
7.22  
7.78  
7.00  
7.37  
7.98  
8.60  
10  
10  
10  
10  
800  
800  
500  
200  
5.0  
6.0  
6.5  
7.0  
163.04  
145.63  
133.93  
125.00  
9.2  
GDE  
GDG  
GDK  
GDM  
BDE  
BDG  
BDK  
BDM  
10.3  
11.2  
12.0  
ATV15C7V5J(B)-G  
ATV15C8V0J(B)-G  
ATV15C8V5J(B)-G  
ATV15C9V0J(B)-G  
8.33  
8.89  
9.44  
9.21  
9.83  
10.40  
11.10  
1
1
1
1
100  
50  
20  
7.5  
8.0  
8.5  
9.0  
116.28  
110.29  
104.17  
97.40  
12.9  
13.6  
14.4  
15.4  
GDP  
GDR  
GDT  
GDV  
BDP  
BDR  
BDT  
BDV  
10.00  
10  
ATV15C100J(B)-G  
ATV15C110J(B)-G  
ATV15C120J(B)-G  
ATV15C130J(B)-G  
11.10  
12.20  
13.30  
14.40  
12.30  
13.50  
14.70  
15.90  
1
1
1
1
5.0  
1.0  
1.0  
1.0  
10.0  
11.0  
12.0  
13.0  
88.24  
82.42  
75.38  
69.77  
17.0  
18.2  
19.9  
21.5  
GDX  
GDZ  
GEE  
GEG  
BDX  
BDZ  
BEE  
BEG  
ATV15C140J(B)-G  
ATV15C150J(B)-G  
ATV15C160J(B)-G  
ATV15C170J(B)-G  
15.60  
16.70  
17.80  
18.90  
17.20  
18.50  
19.70  
20.90  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
14.0  
15.0  
16.0  
17.0  
64.66  
61.48  
57.69  
54.35  
23.2  
24.4  
26.0  
27.6  
GEK  
GEM  
GEP  
GER  
BEK  
BEM  
BEP  
BER  
ATV15C180J(B)-G  
ATV15C190J(B)-G  
ATV15C200J(B)-G  
ATV15C220J(B)-G  
20.00  
21.10  
22.20  
24.40  
22.10  
23.30  
24.50  
26.90  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
18.0  
19.0  
20.0  
22.0  
51.37  
48.73  
46.30  
42.25  
29.2  
30.8  
32.4  
35.5  
GET  
GEB  
GEV  
GEX  
BET  
BEB  
BEV  
BEX  
ATV15C240J(B)-G  
ATV15C260J(B)-G  
ATV15C280J(B)-G  
ATV15C300J(B)-G  
26.70  
28.90  
31.10  
33.30  
29.50  
31.90  
34.40  
36.80  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
24.0  
26.0  
28.0  
30.0  
38.56  
35.63  
33.04  
30.99  
38.9  
42.1  
45.4  
48.4  
GEZ  
GFE  
GFG  
GFK  
BEZ  
BFE  
BFG  
BFK  
ATV15C330J(B)-G  
ATV15C360J(B)-G  
ATV15C400J(B)-G  
ATV15C430J(B)-G  
36.70  
40.00  
44.40  
47.80  
40.60  
44.20  
49.10  
52.80  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
33.0  
36.0  
40.0  
43.0  
28.14  
25.82  
23.26  
21.61  
53.3  
58.1  
64.5  
69.4  
GFM  
GFP  
GFR  
GFT  
BFM  
BFP  
BFR  
BFT  
ATV15C450J(B)-G  
ATV15C480J(B)-G  
ATV15C510J(B)-G  
ATV15C540J(B)-G  
50.00  
53.30  
56.70  
60.00  
55.30  
58.90  
62.70  
66.30  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
45.0  
48.0  
51.0  
54.0  
20.63  
19.38  
18.20  
17.22  
72.7  
77.4  
82.4  
87.1  
GFV  
GFX  
GFZ  
GGE  
BFV  
BFX  
BFZ  
BGE  
ATV15C580J(B)-G  
ATV15C600J(B)-G  
ATV15C640J(B)-G  
ATV15C700J(B)-G  
64.40  
66.70  
71.10  
77.80  
71.20  
73.70  
78.60  
86.00  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
58.0  
60.0  
64.0  
70.0  
16.03  
15.50  
14.56  
13.27  
93.6  
96.8  
103.0  
113.0  
GGG  
GGK  
GGM  
GGP  
BGG  
BGK  
BGM  
BGP  
ATV15C750J(B)-G  
ATV15C780J(B)-G  
ATV15C800J(B)-G  
ATV15C850J(B)-G  
83.30  
86.70  
88.80  
92.10  
95.80  
97.60  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
75.0  
78.0  
80.0  
85.0  
12.40  
11.90  
11.57  
10.95  
121.0  
126.0  
129.6  
137.0  
GGR  
GGT  
GGB  
GGV  
BGR  
BGT  
BGB  
BGV  
94.40 104.00  
ATV15C900J(B)-G  
ATV15C101J(B)-G  
ATV15C111J(B)-G  
ATV15C121J(B)-G  
100.00 111.00  
111.00 123.00  
122.00 135.00  
133.00 147.00  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
90.0  
100.0  
110.0  
120.0  
10.27  
9.26  
8.47  
7.77  
146.0  
162.0  
177.0  
193.0  
GGX  
GGZ  
GHE  
GHG  
BGX  
BGZ  
BHE  
BHG  
Company reserves the right to improve product design , functions and reliability without notice.  
REV: C  
Page 3  
AQW-BTV05  
Comchip Technology CO., LTD.  
SMD Transient Voltage Suppressor  
Electrical Characteristics (ATV15C5V0-G Thru. ATV15C441-G)  
Working  
Peak  
Reverse  
Voltage  
Maximum  
Reverse  
Leakage  
@VRWM  
IR (uA)  
Maximum  
Reverse  
Surge  
Current  
IPP (A)  
Maximum  
Clamping  
Voltage  
@IPP  
Device  
Marking  
Code  
Breakdown voltage  
VBR @ IT  
Part No.  
Min.  
Max.  
(V)  
IT  
UNI  
BI  
(V)  
(mA)  
VRWM (V)  
VC (V)  
ATV15C131J(B)-G  
ATV15C141J(B)-G  
ATV15C151J(B)-G  
ATV15C161J(B)-G  
144.0  
155.0  
167.0  
178.0  
159.0  
171.0  
185.0  
197.0  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
130.0  
140.0  
150.0  
160.0  
7.18  
6.61  
6.17  
5.79  
209.0  
226.8  
243.0  
259.0  
GHK  
GHB  
GHM  
GHP  
BHK  
BHB  
BHM  
BHP  
ATV15C171J(B)-G  
ATV15C181J(B)-G  
ATV15C191J(B)-G  
ATV15C201J(B)-G  
189.0  
200.0  
211.0  
224.0  
209.0  
220.0  
232.0  
247.0  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
170.0  
180.0  
190.0  
200.0  
5.45  
5.14  
4.87  
4.60  
275.0  
291.6  
307.8  
324.0  
GHR  
GHT  
GHV  
GHW  
BHR  
BHT  
BHV  
BHW  
ATV15C221J(B)-G  
ATV15C251J(B)-G  
ATV15C301J(B)-G  
ATV15C351J(B)-G  
246.0  
279.0  
335.0  
391.0  
272.0  
309.0  
371.0  
432.0  
1
1
1
1
1.0  
1.0  
1.0  
1.0  
220.0  
250.0  
300.0  
350.0  
4.20  
3.70  
3.10  
2.60  
356.0  
405.0  
486.0  
567.0  
GHX  
GHZ  
GJE  
GJG  
BHX  
BHZ  
BJE  
BJG  
ATV15C401J(B)-G  
ATV15C441J(B)-G  
447.0  
492.0  
494.0  
543.0  
1
1
1.0  
1.0  
400.0  
440.0  
2.30  
2.10  
648.0  
713.0  
GJK  
GJM  
BJK  
BJM  
Note:  
1) Suffix J denotes 5% tolerance devices.  
2) Suffix B after part number to specify Bi-directional devices.  
3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double.  
Company reserves the right to improve product design , functions and reliability without notice.  
REV: C  
Page 4  
AQW-BTV05  
Comchip Technology CO., LTD.  
SMD Transient Voltage Suppressor  
Reel Taping Specification  
d
P0  
T
P1  
E
F
Index hole  
W
B
C
P
A
W1  
1
2
0
o
D2  
D
D1  
W2  
Trailer  
.......  
Device  
.......  
Leader  
.......  
.......  
Start  
End  
.......  
.......  
.......  
.......  
160mm (min)  
400mm (min)  
Direction of Feed  
SYMBOL  
(mm)  
A
B
C
d
T
D
D1  
D2  
DO-214AB  
(SMC)  
+ 0.50  
1.55 ± 0.05  
0.40 (Max.)  
330.00  
50.00 (Min.) 13.00  
- 0.20  
See Note 1  
+ 0.020  
- 0.008  
(inch)  
0.061 ± 0.002 0.016 (Max.)  
13.000  
1.969 (Min.) 0.512  
SYMBOL  
(mm)  
E
F
P
P0  
P1  
W
W1  
W2  
DO-214AB  
(SMC)  
+ 2.00  
1.75 ± 0.10  
7.50 ± 0.05  
8.00 ± 0.10  
4.00 ± 0.10  
2.00 ± 0.05  
16.00 ± 0.10 16.40  
22.40 (Max.)  
- 0.00  
+ 0.079  
- 0.000  
(inch)  
0.069 ± 0.004 0.295 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.630 ± 0.004 0.646  
0.882 (Max.)  
Notes: 1. A, B, and C the clearance between the component and the cavity must be within 0.5 mm max.  
for 8 mm tape and 12 mm tape, 1.0 mm max. for 16mm tape and 24 mm tape.  
Company reserves the right to improve product design , functions and reliability without notice.  
REV: C  
Page 5  
AQW-BTV05  
Comchip Technology CO., LTD.  
SMD Transient Voltage Suppressor  
Marking Code  
2
1
1. C: COMCHIP  
2. ○: Package  
C
PKG  
4
A
B
C
SMA  
SMB  
SMC  
XXX  
3
3. XXX: Marking code (see Page. 3~4)  
4. :Cathod Band  
Suggested PAD Layout  
A
B
DO-214AB(SMC)  
SIZE  
(mm)  
(inch)  
A
B
C
8.13  
0.320  
0.185 MAX  
4.69 MAX  
1.52 MIN  
D
0.06 MIN  
C
D
3.20 MIN  
0.126 MIN  
Standard Packaging  
REEL PACK  
Case Type  
REEL  
Reel Size  
( pcs )  
(inch)  
DO-214AB  
(SMC)  
3,000  
13  
Company reserves the right to improve product design , functions and reliability without notice.  
REV: C  
Page 6  
AQW-BTV05  
Comchip Technology CO., LTD.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY