MSS7341-823ML [COILCRAFT]
SMT Power Inductors; SMT功率电感
| 型号： | MSS7341-823ML |
| 厂家： | 
Coilcraft lnc. |
| 描述： | SMT Power Inductors |
| 文件： | 总2页 (文件大小：199K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 383-1
SMT Power Inductors
–
MSS7341
• 6.6 × 6.6 mm footprint; 4.1 mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C385 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight: 0.61 – 0.67 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1200/13″ reel; Plastic tape: 16 mm wide, 0.35 mm thick,
12 mm pocket spacing, 4.5 mm pocket depth
PCB washing Only pure water or alcohol recommended
Isat (A)4
Irms (A)5
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max
typ3 10% 20% 30% 20°C 40°C
(Ohms) (MHz) drop drop drop rise rise
MSS7341-474MLD
Termination: L = RoHS compliant gold over nickel
over phos bronze
Partnumber1
(µH)
MSS7341-332NL_
MSS7341-502NL_
MSS7341-622NL_
MSS7341-742NL_
MSS7341-872NL_
3.3±30% 0.020 58.0 2.74 3.28 3.72 3.95 5.00
5.0±30% 0.024 46.0 2.30 2.82 3.16 3.40 4.70
6.2±30% 0.027 42.0 2.18 2.66 2.98 3.05 4.30
7.4±30% 0.031 40.0 1.92 2.32 2.56 2.80 4.10
8.7±30% 0.034 35.0 1.78 2.12 2.36 2.80 3.90
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481
embossed plastic tape (1200 parts
per full reel).
MSS7341-103ML_ 10±20%
MSS7341-123ML_ 12±20%
MSS7341-153ML_ 15±20%
MSS7341-183ML_ 18±20%
MSS7341-223ML_ 22±20%
0.038 32.0 1.64 1.92 2.10 2.80 3.80
0.053 26.2 1.48 1.76 1.92 2.45 3.30
0.057 24.0 1.36 1.60 1.78 2.05 3.00
0.078 22.5 1.20 1.46 1.62 1.85 2.65
0.082 21.5 1.02 1.26 1.42 1.70 2.35
B = Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter D
instead.
MSS7341-273ML_ 27±20%
MSS7341-333ML_ 33±20%
MSS7341-393ML_ 39±20%
MSS7341-473ML_ 47±20%
MSS7341-563ML_ 56±20%
0.109 19.0 1.00 1.14 1.22 1.50 2.10
0.124 18.0 0.91 1.04 1.16 1.50 1.95
0.138 17.0 0.85 1.01 1.12 1.50 1.90
0.155 14.2 0.74 0.92 1.00 1.50 1.85
0.202 13.4 0.68 0.80 0.87 1.25 1.60
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using
a Coilcraft SMD-A fixture in an Agilent/HP 4263B LCR
meter.
3. SRF measured using an Agilent/HP 8753D network
analyzer and a Coilcraft SMD-D test fixture.
4. DC current at which the inductance drops the specified
amount from its value without current.
5. Current that causes the specified temperature rise from
25°C ambient.
MSS7341-683ML_ 68±20%
MSS7341-823ML_ 82±20%
MSS7341-104ML_ 100±20%
MSS7341-224ML_ 220±20%
MSS7341-474ML_ 470±20%
0.276 12.0 0.62 0.73 0.80 1.00 1.35
0.324 11.0 0.57 0.66 0.72 1.00 1.25
0.358 10.5 0.54 0.64 0.71 0.90 1.15
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
0.780
1.45
5.0 0.35 0.41 0.47 0.57 0.78
3.0 0.24 0.28 0.32 0.43 0.57
Specifications subject to change without notice.
Please check our website for latest information.
Document383-1 Revised10/20/09
© Coilcraft, Inc. 2009
Document 383-2
SMT Power Inductors – MSS7341
Typical L vs Current
Typical L vs Frequency
1000
1000
100 µH
100
100 µH
33 µH
100
33 µH
10 µH
10 µH
3.3 µH
10
10
3.3 µH
1.0
1.0
0.01
0.1
1.0
10.0
0.01
0.1
1.0
10.0
Current (A)
Frequency (MHz)
Temperature Rise vs Current
0.287
7,3
*
50
Parts manufactured prior
to Sept. 2007 were marked
with only the dash number.
Dash number
Internal code
123
X
0.287
7,3
*
40
30
20
Dimensions are of the case not
including the termination. For
maximum overall dimensions
including the termination, add
0.02 in / 0,51 mm.
*
0.161
4,1
max
10
0
0.260
6,6
0.280
7,1
typ
0.083
2,1
typ
0.099
2,5
0
1.0
2.0
3.0
4.0
5.0
6.0
0.260
typ
0.181
4,6
Current (Arms)
6,6
Irms Derating
Recommended
Land Pattern
120
110
inches
mm
Dimensions are in
100
90
80
70
60
50
40
30
20
10
0
-40 -20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
Specifications subject to change without notice.
Please check our website for latest information.
Document383-2 Revised10/20/09
© Coilcraft, Inc. 2009
相关型号：
MSS7341-872NTD
General Purpose Inductor, 8.7uH, 30%, 1 Element, Ferrite-Core, SMD, 2929, CHIP, 2929
COILCRAFT
©2020 ICPDF网 联系我们和版权申明