MSS7341-622_L [COILCRAFT]
Shielded Power Inductors;
| 型号： | MSS7341-622_L |
| 厂家： | 
Coilcraft lnc. |
| 描述： | Shielded Power Inductors |
| 文件： | 总2页 (文件大小：385K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 383-1
Shielded Power Inductors
–
MSS7341
• 6.6 × 6.6 mm footprint; 4.1 mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C385 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos
bronze (current production) or gold over nickel over phos bronze (prior
production). Other terminations available at additional cost.
Weight: 0.61 – 0.67 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1200/13″ reel; Plastic tape: 16 mm wide, 0.35 mm thick,
12 mm pocket spacing, 4.5 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (Ohms)
Isat (A)5
Irms (A)6
Inductance2 Percent
SRF typ4
(MHz)
Part number1
(µH)
tolerance3
typ
max
10% drop 20% drop 30% drop 20°C rise 40°C rise
MSS7341-332_L_
MSS7341-502_L_
MSS7341-622_L_
MSS7341-742_L_
MSS7341-872_L_
3.3
5.0
6.2
7.4
8.7
30,20
30,20
30,20
30,20
30,20
0.014
0.018
0.024
0.027
0.029
0.018
0.023
0.027
0.031
0.034
85
49
42
35
33
2.74
2.30
2.18
1.92
1.78
3.28
2.82
2.66
2.32
2.12
3.72
3.16
2.98
2.56
2.36
3.95
3.40
3.05
2.80
2.80
5.00
4.70
4.30
4.10
3.90
MSS7341-103ML_
MSS7341-123ML_
MSS7341-153ML_
MSS7341-183ML_
MSS7341-223ML_
10
12
15
18
22
20
20
20
20
20
0.032
0.040
0.047
0.065
0.074
0.038
0.050
0.055
0.075
0.082
32
27
26
25
22
1.64
1.48
1.36
1.20
1.02
1.92
1.76
1.60
1.46
1.26
2.10
1.92
1.78
1.62
1.42
2.80
2.45
2.05
1.85
1.70
3.80
3.30
3.00
2.65
2.35
MSS7341-273ML_
MSS7341-333ML_
MSS7341-393ML_
MSS7341-473ML_
MSS7341-563ML_
MSS7341-683ML_
MSS7341-823ML_
MSS7341-104ML_
MSS7341-154ML_
MSS7341-224ML_
27
33
39
47
56
68
82
100
150
220
470
680
20
20
20
20
20
20
20
20
20
20
0.091
0.104
0.115
0.127
0.174
0.236
0.257
0.286
0.438
0.660
0.109
0.124
0.130
0.155
0.202
0.250
0.290
0.310
0.475
0.710
19
17
15
14
11
9.6
8.5
7.2
6.0
5.0
1.00
0.91
0.85
0.74
0.68
0.62
0.57
0.54
0.45
0.35
1.14
1.04
1.01
0.92
0.80
0.73
0.66
0.64
0.53
0.41
1.22
1.16
1.12
1.00
0.87
0.80
0.72
0.71
0.58
0.47
1.50
1.50
1.50
1.50
1.25
1.00
1.00
0.90
0.86
0.57
2.10
1.95
1.90
1.85
1.60
1.35
1.25
1.15
1.14
0.78
MSS7341-474ML_
MSS7341-684KL_
20
10
1.21
1.85
1.45
1.98
3.0
2.5
0.24
0.22
0.28
0.27
0.32
0.29
0.43
0.42
0.57
0.56
1. When ordering, specify tolerance, termination and packaging codes:
MSS7341-872NLD
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft
SMD-A fixture in an Agilent/HP 4263B LCR meter.
3. Tolerances in bold are stocked for immediate shipment.
Tolerance:
M= 20%, N = 30% (Table shows stock tolerances in bold.)
4. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
Termination: L = RoHS compliant matte tin over nickel over phos bronze
Special order:T = RoHS tin-silver-copper
(95.5/4/0.5) over gold over nickel over phos bronze
or S = non-RoHS tin-lead (63/37) over gold over
nickel over phos bronze.
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1200 parts per full reel).
7. Electrical specifications at 25°C.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 383-1 Revised 12/11/15
Document 383-2
Shielded Power Inductors – MSS7341
Typical L vs Current
Typical L vs Frequency
1000
1000
680 µH
680 µH
220 µH
220 µH
100 µH
100 µH
100
100
33 µH
33 µH
10 µH
10 µH
10
10
1
3.3 µH
3.3 µH
1
0.01
0.1
1
10
0.01
0.1
1
10
Current (A)
Frequency (MHz)
0.287
7,3
*
max
Typical Temperature Rise vs Current
50
Parts manufactured prior
to Sept. 2007 were marked
with only the dash number.
Dash number
Internal code
123
X
0.287
7,3
*
max
40
30
20
Dimensions are of the case not
including the termination. For
maximum overall dimensions
including the termination, add
0.02 in / 0,51 mm.
*
0.161
4,1
max
0.260
6,6
0.280
7,1
10
0
typ
0.083
2,1
typ
0.099
2,5
0.280
7,1
0.260
typ
0
1.0
2.0
3.0
4.0
5.0
6.0
6,6
Current (Arms)
0.222
∅
5,65
Recommended
Land Pattern
inches
mm
Dimensions are in
Document 383-2 Revised 12/11/15
相关型号：
©2020 ICPDF网 联系我们和版权申明