LPS4018-561MRD [COILCRAFT]
General Purpose Inductor, 0.56uH, 20%, 1 Element, Ferrite-Core, SMD, 1515, CHIP, 1515, HALOGEN FREE AND ROHS COMPLIANT;型号: | LPS4018-561MRD |
厂家: | Coilcraft lnc. |
描述: | General Purpose Inductor, 0.56uH, 20%, 1 Element, Ferrite-Core, SMD, 1515, CHIP, 1515, HALOGEN FREE AND ROHS COMPLIANT 测试 功率感应器 电感器 |
文件: | 总2页 (文件大小:167K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Document 435-1
Shielded Power Inductors
–
LPS4018
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.8 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 54 – 100 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR
SRF
Inductance2 max3
typ4 10% 20% 30% 20°C 40°C
LPS4018-223MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
(µH)
(Ohms) (MHz) drop drop drop rise rise
LPS4018-561MR_
LPS4018-102NR_
LPS4018-222MR_
LPS4018-332MR_
LPS4018-472MR_
0.56 20% 0.033 250
1.0 30% 0.042 180
2.2 20% 0.070
3.3 20% 0.080
4.7 20% 0.125
4.8
3.8
2.7
1.9
1.8
5.2
3.9
2.8
2.0
1.9
5.3
4.0
2.9
2.0
1.9
1.9
1.8
1.5
1.4
1.3
2.8
2.5
2.0
1.9
1.8
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
90
75
65
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS4018-682MR_
6.8 20% 0.150
50
40
32
27
26
1.2
1.1
1.3
1.2
1.3
1.3
1.0
1.5
B=Less than full reel. In tape, but not
machine ready.
LPS4018-103MR_ 10 20%
LPS4018-153MR_ 15 20%
LPS4018-183MR_ 18 20%
LPS4018-223MR_ 22 20%
0.200
0.260
0.270
0.360
0.90 1.25
0.86 0.91 0.94 0.80 1.12
0.78 0.83 0.85 0.70 1.00
0.74 0.80 0.83 0.65 0.90
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
LPS4018-333MR_ 33 20%
LPS4018-473MR_ 47 20%
LPS4018-683MR_ 68 20%
LPS4018-104MR_ 100 20%
LPS4018-124MR_ 120 20%
0.420
0.650
0.950
1.40
20
16
13
10
0.58 0.64 0.68 0.55 0.80
0.51 0.55 0.56 0.45 0.68
0.41 0.45 0.46 0.40 0.56
0.34 0.36 0.37 0.35 0.50
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
1.60
9.0 0.31 0.33 0.34 0.30 0.45
LPS4018-154MR_ 150 20%
LPS4018-184MR_ 180 20%
LPS4018-224MR_ 220 20%
LPS4018-334MR_ 330 20%
LPS4018-474MR_ 470 20%
2.00
2.50
3.70
5.90
7.80
8.0 0.27 0.29 0.30 0.28 0.40
7.5 0.24 0.26 0.27 0.26 0.36
6.5 0.21 0.225 0.235 0.20 0.30
5.5 0.18 0.19 0.20 0.17 0.23
4.5 0.14 0.16 0.17 0.15 0.20
LPS4018-564MR_ 560 20% 10.0
LPS4018-684MR_ 680 20% 11.5
LPS4018-824MR_ 820 20% 14.0
LPS4018-105MR_ 1000 20% 18.0
4.0 0.13 0.14 0.15 0.14 0.18
3.5 0.12 0.13 0.14 0.12 0.16
2.9 0.11 0.12 0.13 0.10 0.14
2.8 0.10 0.11 0.11 0.098 0.125
Refer to Doc 362 “Soldering Surface Mount Compo-
nents” before soldering.
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220
µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to
order, contact Coilcraft or visit http://order.coilcraft.com.
Document 435-1 Revised 08/01/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 435-2
Shielded SMT Power Inductors
–
LPS4018 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
2200 µH
2200 µH
680 µH
1000
1000
680 µH
100
10
100
22 µH
22 µH
10
4.7 µH
4.7 µH
1 µH
1 µH
1
1
0.1
0.1
0.01
0.1
1
10
0.01
0.1
10
1
Current (A)
Frequency (MHz)
0.1535 0.003
3,90 0,0ꢀ7
*
Current Derating
120
110
0.1535 0.003
3,90 0,0ꢀ7
Winding
direction
*
100
90
80
70
60
50
40
30
XXXX
Dash
Internal
code
number
Recommended
Land Pattern
0.0779 0.004
1,ꢀ0 0,10
0.105
2,77
*
0.059
1,50
20
Isat
Irms
10
0
0.0305
0,ꢀꢀ5
-40 -20
0
20
40
60
80
100 120 140
0.110 0.045
2,ꢀ9 1,15
0.153
3,89
Ambient temperature (°C)
0.070
1,52
0.129
3,28
0.1ꢀ3
4,40
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
Dimensions are of the case not including
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
*
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
inches
mm
Dimensions are in
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
NEW
OLD
123
123
123
Document 435-2 Revised 08/01/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
相关型号:
LPS4018-564ML_
Very low DCR; excellent current handling, 4.0 Ã 4.0 mm footprint; less than 1.8 mm tall
COILCRAFT
©2020 ICPDF网 联系我们和版权申明