B0695-A [COILCRAFT]
SMPS Transformer;
| 型号： | B0695-A |
| 厂家： | 
Coilcraft lnc. |
| 描述： | SMPS Transformer 变压器 |
| 文件： | 总1页 (文件大小：172K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 398
For National Semiconductor
Flyback Transformer LM5020 PWM Controller
• Designed to operate up to 1 MHz with 36 –72 V input.
• 3.3 V, 4.5 A output with secondary windings connected in
parallel. Bias output is 12 V.
• Ideal for 13 W, IEEE 802.3af-compliant, PoE applications.
Core material Ferrite
Terminations RoHS tin-silver over tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight 12.8 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 175 per 13″ reel Plastic tape: 44 mm wide,
0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR max (Ohms)4
number1 ±10% (µH) ±10% (µH) pri
aux sec
B0695-AL_ 110 99.0 0.133 0.656 0.019
Turnsratio6
pri :sec pri :bias
Part
L at 0 A2
L at Ipk3
Leakage
L (µH)5
Capacitance7 Ipk3 Isolation8
(pF)
(A)
(Vrms)
1.11
1 :0.23 1 :0.69
110
1.5
1500
1. When ordering, please specify a packaging code:
B0695-ALD
3. Ipk is the peak current drawn at minimum input voltage.
4. DCR for the secondary is per winding.
5. Leakage inductance measured between pins 4 and 6 with all other pins
shorted.
6. Turns ratio is with the secondary windings connected in parallel.
7. Capacitance measured between pins 3 and 4 with other pins shorted.
8. Isolation is measured from the primary and bias to the secondary.
9. Electrical specifications at 25°C.
Packaging: D = 13″ machine ready reel. EIA-481 embossed plastic
tape (175 per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance is for the primary, measured at 10 kHz, 0.1 Vrms, 0 Adc.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
12
11
10
Dot indicates pin 1
1
0.130
3,30
0.930
23,62
0.028
0,711
0.050
1,27
4
12
1
Pri
Sec
0.810
20,57
Recommended
Land Pattern
max
6
1
9
8
7
6
7
Bias
0.118
3,0
0.118
3,0
1.181
30,00
max
3
Secondary windings to be connected
in parallel on PC board.
0.450
11,43
max
0.004/0,10
0.827
0.080
2,03
21,00
0.969
24,60
Specifications subject to change without notice.
Please check our website for latest information.
Document398 Revised10/28/08
© Coilcraft, Inc. 2009
相关型号：
©2020 ICPDF网 联系我们和版权申明