KSC101J50SHLFS [CK-COMPONENTS]
Sealed Tact Switch for SMT; 密封的轻触开关,用于SMT型号: | KSC101J50SHLFS |
厂家: | C&K COMPONENTS |
描述: | Sealed Tact Switch for SMT |
文件: | 总7页 (文件大小:290K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KSC Series
Sealed Tact Switch for SMT
Features/Benefits
Typical Applications
•
•
•
•
•
Positive tactile feeling
Range of 6 actuation forces
J or G terminations
Tape & reel
•
•
•
•
Automotive
Cellular phones
Industrial electronics
Network infrastructure and IT
IP 67
Specification
FUNCTION: Momentary action
CONTACT ARRANGEMENT: 1 make contact = SPST, N.O.
TERMINALS: J bend & Gullwing type for SMT
Electrical
Silver
Gold
B
MAXIMUM POWER:
MAXIMUM VOLTAGE:
MINIMUM VOLTAGE:
MAXIMUM CURRENT:
MINIMUM CURRENT:
1 VA
32 VDC
20 mV
50 mA
1 mA
0.2 VA
32 VDC
20 mV
10 mA
1 mA
Mechanical
Operating
force FA
(Newtons)
Min/Max
1.2 / 2.5
2.25 / 3.75
4.1 / 6.9
0.9 / 2.0
1.5 / 2.5
1.5 / 2.5
2.6 / 4.4
4.1 / 7.0
1.6 / 2.4
2.25 / 3.75
4.0 / 6.0
0.82 / 1.38
1.05 / 1.75
1.25 / 2.12
1.25 / 2.12
3.0 / 5.0
Operating
life
(operations)
Type
Travel
(mm)
DIELECTRIC STRENGTH (50 Hz, 1 min.): 250 V
CONTACT RESISTANCE: < 100 mΩ
INSULATION RESISTANCE (100 V): > 109 Ω
BOUNCE TIME: < 1 ms
KSC121J
KSC141J
KSC151J
KSC201J
KSC221J
KSC222J
KSC241J
KSC251J
KSC321J
KSC341J
KSC351J
KSC401J 50SH
KSC411J 70SH
KSC421J 70SH
KSC422J 70SH
KSC441J 70SH
KSC442J 70SH
KSC621J
200,000
200,000
100,000
300,000
500,000
1,000,000
300,000
300,000
300,000
300,000
100,000
1,000,000
1,000,000
300,000
1,000,000
300,000
1,000,000
300,000
300,000
300,000
300,000
300,000
0.3 0.15
0.3 0.15
0.35 0.15
0.3 +0.2 /-0.15
0.35 +0.3 /-0.1
0.35 +0.3 /-0.1
0.5 0.2
Environmental
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
Silver
Gold
-40˚C to 85˚C -40˚C to 125˚C
-55˚C to 85˚C -55˚C to 125˚C
Process
0.5 0.2
0.2 +0.3 /0
0.2 +0.3 /0
0.25 +0.3 /0
0.3 0.15
0.35 0.20
0.5 0.25
SOLDERING: Depending on the application, this component is
suited to the following methods:
– Terminals being silver or gold plated over a nickel barrier, the
use of slightly activated flux is suitable.
– Soldering on double wave machine for vertical versions:
soldering time < 5 sec.
– Cleaning according to typical washing processes.
– Infrared Reflow Soldering in accordance with IEC 61760-1.
0.5 0.25
0.75 0.25
0.75 0.25
0.5 0.2
0.5 0.2
0.375 0.225
0.3 0.15
3.0 / 5.0
1.0 / 1.65
2.25 / 3.75
1.4 / 2.2
1.7 / 2.8
2.9 / 4.9
Packaging
KSC641J
KSC421V
KSC721 J
KSC741J
KSC1, KSC2 and KSC3 are delivered on continuous tape and reels of
2,000 pieces, KSC4 in reels of 1,000 pieces. KSC 6 in reels of 750
pieces. KSC7 in reels of 1,000 pieces. KSCV in boxes of 500 pieces.
Dimensions of reels according to EIA RS481 or IEC 2863. External
diameter 330 mm 2 mm.
0.4 0.20
A detect switch version is available KSC4D1J and KSC4D1G.
Please see Detect chapter.
KSC vertical series have an IP40 sealing level.
NOTE: Specifications listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Other versions in terms of force, termination length and corrosion protection available.
Please contact your sales representative.
This data sheet does not provide enough information for applications which require a
certain level of quality or safety such as automotive, medical systems, safety equipment.
Please contact your sales representative to get contractual specification package.
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select
desired option from each category and place it in the appropriate box.
For any part number different from those listed above, please consult your local representative.
K
S
C
S
H
Actuator
LFS Lead free compatible, silver plated.
LFG Lead free compatible, gold plated.
1 Without, H=2,5 mm
2 Soft, H=3,5 mm
3 Hard, H=3,5 mm
4 Soft, H=5,2 mm
6 Hard, H=7,7 mm
7 Soft, H=4,3 mm****
Operating Force
0 1.2 N (120 grams)
1 1.4 N (140 grams)
2 1.6 N / 1.7 N *
(160 grams)/(170 grams)
4 3 N / 4 N *
(300 grams)/(400 grams)
5 5.5 N (550 grams)
6 4.5 N / 8.0
Rubber Hardness Indication
50 Shore**
70 Shore***
Termination
J J bend
G Gull wing
V Right angle
*
See Mechanical chart above to confirm specifications.
** Applies to KSC401J50SH only.
*** Applies to KSC 411J70SH, KSC421J70SH,KSC441J70SH
**** KSC7 offered with blue actuator as standard
Contact Material
Operating life
1 Silver
2 Silver long life
3 Gold
(available in KSC421V)
4 Gold long life
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
(450 grams)/(800 grams)
www.ck-components.com
B–23
KSC Series
Sealed Tact Switch for SMT
ACTUATOR
KSC1 WITHOUT, 2.5 mm HIGH
KSC2 SOFT, 3,5 mm HIGH
KSC3 HARD, 3,5 mm HIGH
ø2,8
(.110)
2,9
(.114)
3,5
B
ø2,6
(.102)
KSC4 KSC421V ONLY
KSC4 SOFT, 5,2 mm HIGH
NOTE: KSC4 standard silicone
material is 70 shore, the only
exception is KSC401J which is
50 shore.
NOTE: KSC421V requires metalized holds for simultaneous reflow soldering of switch
terminals and bracket terminals.
KSC6 HARD, 7,7 mm HIGH
ø4,7
(.185)
ø3,0
(.118)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
B–24
KSC Series
Sealed Tact Switch for SMT
KSC7 SOFT, 4,3 mm HIGH, BLUE ACTUATOR
ø 2,7 0,1
B
3,5 0,2
+0,3
6,2
0
6,8
0,3
OPERATING FORCE
OPTION
CODE
OPERATING FORCE
1.2 N (120 grams)
0
1
2
4
5
1.4 N (140 grams)
1.6 N / 1.7 N (160/170 grams)
3 N / 3.5 N (300/350 grams)
5.5 N (550 grams)
CONTACT MATERIAL
OPTION
CODE
MATERIAL
1
3
SILVER
GOLD
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
B–25
KSC Series
Sealed Tact Switch for SMT
TERMINATION
J
J BEND
G
GULLWING
V
RIGHT ANGLE - KSC421V ONLY
10
(.394)
B
0,5
(.020)
7,5+0,3/-0,0
(.295+.012/-.000)
6,8
(.268)
PAD LAYOUT
1
2
1,2 (x2)
ø
LAYOUT
3,3
(.±47)
±,8
(.±31)
3,3
Metallized
holes
(.13±)
(.13±)
2
1
PAD LAYOUT
PAD LAYOUT
1,38
(.±54)
1,38
(.±54)
5,8 max.
(.228)
3,0 max.
(.118)
±,6
(.±23)
±,6
(.±23)
12,0 min.
(.472)
8,6 min.
(.339)
5,65±±,±5
(.222±.±1±)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
B–26
KSC Series
Sealed Tact Switch for SMT
TAPE & REEL
FOR KSC1 J TERMINATION
8,0
ø1,5+0,1/-0,0
(.059+.004/-.000ꢀ
2,00,05
(.079.002ꢀ
(.315ꢀ
ø1,5+0,2/-0,0
2,0 0,05
(.079 .002ꢀ
(.059+.008/-.000ꢀ
B
DIRECTION OF FEED
2˚0' max.
0,25 0,05
(.010 .002ꢀ
6,6+0,2/-0,0
(.260+.008/-.000ꢀ
3,15+0,2/-0,0
(.124+.008/-.000ꢀ
FOR KSC1 G TERMINATION
8,0
ø1,ꢀ+0,1/-0,0
(.31ꢀꢁ
(.0ꢀ9+.004/-.000ꢁ
ø1,ꢀ+0,2/-0,0
2,0 0,0ꢀ
(.079 .002ꢁ
2,0 0,0ꢀ
(.079 .002ꢁ
(.0ꢀ9+.008/-.000ꢁ
DIRECTION OF FEED
2˚0' max.
0,3 0,0ꢀ
(.012 .002ꢁ
6,6+0,2/-0,0
(.260+.008/-.000ꢁ
3,2+0,2/-0,0
(.126+.008/-.000ꢁ
FOR KSC2 & KSC3 J TERMINATION
8,0
ø1,5+0,1/-0,0
(.059+.004/-.000)
(.315)
ø1,5+0,2/-0,0
(.059+.008/-.000)
20,05
(.079.002)
20,05
(.079.002)
2˚0' max.
DIRECTION OF FEED
0,250,05
(.010.002)
6,6+0,2/-0,0
(.260+.008/-.000)
3,95+0,2/-0,0
(.156+.008/-.000)
FOR KSC2 & KSC3 G TERMINATION
8,0
ø1,5+0,1/-0,0
(.315)
(.059+.004/-.000)
ø1,5+0,2/-0,0
20,05
2
0,05
(.059+.008/-.000)
(.079.002)
(.079 .002)
DIRECTION OF FEED
2˚0' max.
0,3 0,05
(.012 .002)
4,0+0,2/-0,0
(.157+.008/-.000)
6,6+0,2/-0,0
(.260+.008/-.000)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
B–27
KSC Series
Sealed Tact Switch for SMT
TAPE & REEL
FOR KSC4 FOR G TERMINATION
ꢀ2±±,ꢀ
(.472±.±±4ꢁ
2±±,±5
(.±79±.±±2ꢁ
2±±,±5
(.±79±.±±2ꢁ
øꢀ,5+±,ꢀ/-±,±
(.±59+.±±4/-.±±±ꢁ
4±±,ꢀ
(.ꢀ57±.±±4ꢁ
5,6
(.220)
B
B
Direction of feed
2˚±'
±,ꢀ5±±,±2
(.±±6±.±±ꢀꢁ
B
øꢀ,5+±,2/-±,±
(.±59+.±±8/-.±±±ꢁ
±,4±±,±3
(.±ꢀ6±.±±ꢀꢁ
2,±5
(.±8ꢀꢁ
6,7±±,ꢀ
(.264±.±±4ꢁ
FOR KSC4 FOR J TERMINATION
ꢀ2 0,ꢀ
(.472 .004)
2
0,05
2
0,05
øꢀ,5+0,ꢀ/-0,0
(.059+.004/-.000)
(.079 .002)
(.079 .002)
4
0,ꢀ
5,6
(.220)
(.ꢀ57 .004)
B
2˚0'
Direction of feed
0,ꢀ5 0,02
(.006 .00ꢀ)
B
øꢀ,5+0,2/-0,0
(.059+.008/-.000)
0,4 0,03
(.0ꢀ6 .00ꢀ)
2,05
(.08ꢀ)
6,7 0,ꢀ
(.264 .004)
FOR KSC6 G & J TERMINATION
6,4
(.252)
15˚
3,0
(.118)
0,1
B
20,05
(.079.002)
12,0
(.472)
4,0
(.157)
ø1,5+0,1/-0,0
(.059+.004/-.000)
2,5
(.098)
4˚
20,05
(.079.002)
1,7
(.067)
Direction of feed
0,40,03
(.016.001)
A
A
15˚
B
ø2+0,1/-0,0
(.079+.004/-.000)
7,7+0,1/-0,0
(.303.004/-.000)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
B–28
KSC Series
Sealed Tact Switch for SMT
TAPE & REEL
FOR KSC7 FOR J TERMINATION
ꢀ2 0,ꢀ
(.472 .004)
2
0,05
2
0,05
øꢀ,5+0,ꢀ/-0,0
(.059+.004/-.000)
(.079 .002)
(.079 .002)
4
0,ꢀ
5,6
(.220)
(.ꢀ57 .004)
B
B
2˚0'
0,ꢀ5 0,02
(.006 .00ꢀ)
B
øꢀ,5+0,2/-0,0
(.059+.008/-.000)
0,4 0,03
(.0ꢀ6 .00ꢀ)
2,05
(.08ꢀ)
6,7 0,ꢀ
(.264 .004)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
B–29
相关型号:
©2020 ICPDF网 联系我们和版权申明