PSA10VB270MH11T15 [CHEMI-CON]
CAPACITOR, ALUMINUM ELECTROLYTIC, SOLID POLYMER, POLARIZED, 10V, 270uF, THROUGH HOLE MOUNT, RADIAL LEADED;
| 型号： | PSA10VB270MH11T15 |
| 厂家： | 
UNITED CHEMI-CON, INC. |
| 描述： | CAPACITOR, ALUMINUM ELECTROLYTIC, SOLID POLYMER, POLARIZED, 10V, 270uF, THROUGH HOLE MOUNT, RADIAL LEADED |
| 文件： | 总2页 (文件大小：47K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Radial Lead
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
New!
@Super low ESR, high temperature resistance and high ripple current capability
@Rated voltage range : 2.5 to 10Vdc
@2000 hours at 105C
@Suitable for DC-DC converters, voltage regulators and decoupling applications
for computer motherboards
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-55 to +105C
Rated Voltage Range 2.5 to 10Vdc
Capacitance Tolerance P20% (M)
(at 20C, 120Hz)
(at 105C)
Surge Voltage
Leakage Current
*Note
Rated voltageB1.15V
I=0.2CV (max.)
Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc
)
(at 20C after 2 minutes)
(at 20C, 120Hz)
Dissipation Factor
(tane)
0.08 max.
Low Temperature
Characteristics
Max. impedance ratio at 100kHz to the 20C value
Z(-25C)/Z(+20C)[1.15
Z(
-55C)/Z(+20C)[1.25
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours
at 105C.
Appearance
Capacitance change
D.F. (tanE)
No significant damage
[P20% of the initial measured value
[150% of the initial specified value
[150% of the initial specified value
[The initial specified value
ESR
Leakage current
Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,
90 to 95% RH for 1000 hours.
Appearance
Capacitance change
D.F. (tanE)
No significant damage
[P20% of the initial measured value
[150% of the initial specified value
[150% of the initial specified value
[The initial specified value
ESR
Leakage current
Surge Voltage Test The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance
Capacitance change
D.F. (tanE)
No significant damage
[P20% of the initial measured value
[150% of the initial specified value
[150% of the initial specified value
[The initial specified value
ESR
Leakage current
Failure Rate
1% per 1000 hours maximum (Confidence level 60% at 105C)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.
?DIMENSIONS [mm]
?MARKING
Coated Case
EX) 4V560MF
292
A
560
4V
fD
L
8
11.5
3.5
10
11.5
5.0
F
L+1.5 max.
15min.
4min.
(1/2)
CAT. No. E1001D
Radial Lead
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
New!
?PART NUMBERING SYSTEM
PSA
4
VB 560
M
H11 T15
Lead configuration code
Case code (H11 : 8B11.5, J12 : 10B11.5)
Design change code
Capacitance
270MF
Code
270
560
Capacitance tolerance (P20%)
Nominal Capacitance code
Terminal type (VB)
560MF
820MF
820
Rated voltage in volts
Series name
Lead configuration code
T14: Ammo pack for F10(F=5.0)
T15: Ammo pack for F8(F=3.5)
E5 : Cut lead (Lead length C=3.5P0.5mm)
*Regarding to taping specifications and cut/formed lead, please consult us.
?STANDARD RATINGS
Nominal
Capacitance
(mF) P20%
ESR
(momax./20c,
100k to 300kHz)
Ripple current
(mArms max./
105c,100kHz)
Case size
fDBL(mm)
Rated voltage
(Vdc
Part Number
)
2.5
2.5
4
680
820
7
7
7
8
9
6
6
7
8
5,580
5,580
5,580
5,080
4,710
5,860
5,860
5,860
5,650
PSA2.5VB680MH11
PSA2.5VB820MH11
PSA4VB560MH11
PSA6.3VB390MH11
PSA10VB270MH11
PSA2.5VB1000MJ11
PSA4VB820MJ11
PSA6.3VB680MJ11
PSA10VB470MJ11
560
8b11.5
6.3
390
10
270
2.5
4
1,000
820
10b11.5
6.3
680
10
470
(2/2)
CAT. No. E1001D
相关型号：
©2020 ICPDF网 联系我们和版权申明