CM431BCN [CHAMP]

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR; 低电压可调并联稳压器
CM431BCN
型号: CM431BCN
厂家: CHAMPION MICROELECTRONIC CORP.    CHAMPION MICROELECTRONIC CORP.
描述:

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
低电压可调并联稳压器

稳压器
文件: 总12页 (文件大小:215K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
GENERAL DESCRIPTION  
FEATURES  
The CM431 is a three-terminal adjustable shunt voltage regulator  
with specified thermal stability and pin-to-pin compatible with the  
earlier 431 series. The output voltage can be adjusted to any  
value between VREF and 36V by using two external resistors. The  
CM431 offers low output impedance for improved load regulation  
with a typical output impedance of 200mΩ. Because of the  
active output circuitry, the CM431 can replace the zener diodes in  
applications such as switching power supplies, OVP crowbar  
circuits, references for A/D, D/A converters with improved turn-on  
characteristics.  
‹
‹
‹
‹
‹
‹
‹
Initial voltage reference accuracy of 1.0%.  
Sink current capability from 1mA to 100mA  
Typical output dynamic impedance less than 200mΩ;  
Adjustable output voltage from VREF to 36V  
Available in SOT-23, SOT-89, TO-92, & SOP-8  
Low output noise  
Typical equivalent full range temperature coefficient of  
30ppm/OC  
APPLICATIONS  
‹
‹
‹
‹
‹
Voltage Reference  
Precision shunt regulator  
High current shunt regulator  
PWM down converter with reference  
Voltage monitor  
PIN CONFIGURATION  
TO-92  
SOT-23-3  
Front View  
Top View  
3
CM431XCM233  
REF  
CM431XCM2R3  
CATHODE  
REF  
Pin 1  
Pin 2  
Pin 3  
CATHODE  
ANODE  
ANODE  
Suffix “X”: Grade “A”, “B”, “C”, or “D”  
2
1
2
3
1
SOT-23-5  
Top View  
SOT-89  
SOP-8  
Top View  
Top View  
5
4
1
2
3
4
REF  
8
7
6
5
CATHODE  
NC  
ANODE  
NC  
NC  
NC  
NC  
2
3
1
1
2
3
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 1  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
TYPICAL APPLICATION  
BLOCK DIAGRAM  
VO = 5V  
V+  
CATHODE  
Rb  
R1  
27.5K  
0.1%  
+
REF  
Note: Rb should  
provide cathode  
current 1mA  
-
R2  
27.5K  
0.1%  
VREF  
ANODE  
5V Precision Regulator  
ORDERING INFORMATION  
PACKAGE  
TOLERANCE  
0.5%  
0.7%  
1.0%  
T/R Quantity  
TR=3K  
SOT-231)  
SOT-231)  
SOT-891)  
TO-922)  
SOP-8  
CM431ACM233  
CM431ACM2R3  
CM431ACM89  
CM431ACN  
CM431DCM233  
CM431DCM2R3  
CM431DCM89  
CM431DCN  
CM431BCM233  
CM431BCM2R3  
CM431BCM89  
CM431BCN  
TR=3K  
TR=1K  
TA=2K  
CM431ACS  
CM431DCS  
CM431BCS  
SOT-231)  
SOT-231)  
SOT-891)  
TO-922)  
SOP-8  
CM431GACM233*  
CM431GACM2R3*  
CM431GACM89*  
CM431GACN*  
CM431GACS*  
CM431GDCM233*  
CM431GDCM2R3*  
CM431GDCM89*  
CM431GDCN*  
CM431GDCS*  
CM431GBCM233*  
CM431GBCM2R3*  
CM431GBCM89*  
CM431GBCN*  
CM431GBCS*  
TR=3K  
TR=3K  
TR=1K  
TA=2K  
Notes:  
1Add suffix TRfor Tape & Reel.  
2Add suffix TAfor Tape Ammo.  
3*Note: Add suffix “G” for Pb Free Product  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 2  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
ABSOLUTE MAXIMUM RATINGS  
Cathode to Anode Voltage (VKA) (Note 2)  
Continuous Cathode Current (IK)  
-0.3V to 37V  
-100mA to 150mA  
-50uA to 10mA  
150OC  
-65OC to 150OC  
260OC  
Reference Input Current (IREF  
)
Maximum junction temperature range, TJ  
Storage temperature range  
Lead temperature (soldiering, 10 seconds)  
Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground.  
Currents are positive into, negative out of the specified terminal.  
Note 2: Voltage values are with respect to the anode terminal unless otherwise noted.  
POWER DISSIPATION TABLE  
Package  
θJA  
Derating factor ( mW/OC )  
TA25OC  
TA=70OC  
TA= 85OC  
( OC/W )  
TA25OC  
Power rating(mW)  
Power rating(mW) Power rating (mW)  
SOP-8  
TO-92  
165  
156  
6.06  
6.41  
757  
801  
485  
513  
394  
417  
SOT-89  
71(note)  
285  
14.1  
3.5  
1763  
438  
1128  
280  
916  
228  
SOT-23  
Note :  
1. For SOT-89 package, Thermal Resistance-Junction to Tab ( θJT ) =35OC/W. TJ = TTAB + (PD x θJT)  
2.  
θJA: Thermal Resistance-Junction to Ambient  
Junction Temperature Calculation: TJ = TA + (PD x θJA).  
The θJA numbers are guidelines for the thermal performance of the device/PC-board system.  
All of the above assume no ambient airflow.  
RECOMMENDED OPERATING CONDITIONS  
Min  
Max  
Units  
OC  
mA  
V
Operating free air temperature range, TA  
Cathode current, IK  
0
1
0
105  
100  
36  
Cathode voltage, VKA  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 3  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
ELECTRICAL CHARACTERISTICS  
Unless otherwise specified, these specifications apply over the operating ambient temperatures with TA = 25°C.  
CM431  
Parameter  
Symbol  
Test Conditions  
Units  
Min  
Typ  
2.495  
2.495  
2.495  
4
Max  
2.507  
2.512  
2.520  
17  
IK = 10mA, VKA = VREF ,0.5%  
IK = 10mA, VKA = VREF ,0.7%  
2.482  
2.478  
2.470  
V
V
Reference Input Voltage  
VREF  
IK = 10mA, VKA = VREF ,1.0%  
IK = 10mA, VKA = VREF, 0OC TA 70OC  
V
Reference Drift  
mV  
Voltage Ratio, Ref to Cathode  
(note 4)  
IK = 10mA, VKA = 2.5V to 36V  
-1.4  
2
-2.7  
mV/V  
IK = 10mA,VKA = VREF  
IK = 10mA,VKA = VREF, 0OC TA 70OC  
VKA = VREF  
4
2.3  
1
Reference Input Current  
IREF  
μA  
Minimum Operating Current  
Off-State Cathode Current  
IMIN  
IOFF  
0.4  
0.1  
mA  
VKA = 36V, VREF = 0V  
1
μA  
V
KA = VREF, IK = 1mA to 100mA,  
Dynamic Impedance  
|ZKA  
|
0.2  
0.5  
Ω
f 1kHz  
Note 3: These parameters are guaranteed by design  
VREF  
Note 4:  
Ratio of change in reference input voltage to the change in cathode voltage  
VKA  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 4  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
PARAMETER MEASUREMENT INFORMATION  
Input  
VKA  
Input  
VKA  
R1  
R2  
IREF  
VRE  
EF (1 + R1/R2) + IREF x R1  
Figure 2. Test Circuit for VKA > VREF  
Figure 1. Test Circuit for VKA = VREF  
Input  
VKA  
IOFF  
Figure 3. Test Circuit for IOFF  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 5  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
TYPICAL CHARACTERISTICS  
Cathode Current vs. Cathode Voltage  
Cathode Current vs. Cathode Voltage  
Ref. Input Voltage vs. Free-Air Temperature  
Ref. Input Current vs. Free-Air Temperature  
Stability Boundray Conditions  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
0.001  
0.01  
0.1  
1
10  
CL-Load Capacitance(uF)  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 6  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
APPLICATION INFORMATION  
R*  
VBATT  
VO  
VBATT  
R1  
0.1%  
CM431  
VO  
CM431  
VREF  
Von 2V  
Voff VBATT  
Input  
R2  
0.1%  
Vth = 2.5V  
GND  
VO = (1 + R1/R2) × VREF  
Note: R should provide 1mA cathode current to the  
CM431 of minimum VBATT  
Figure 5. Single –Supply Comparator With Temperature  
Figure 4. Shunt Regulator  
compensated threshold.  
VBATT  
VO  
VBATT  
VO  
R1  
R2  
R1  
R2  
CM431  
C
CM431  
VO = (1 + R1/R2) × VREF  
Figure 7. Crowbar Circuit  
Figure 6. High-Current Shunt Regulator  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 7  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
APPLICATION INFORMATION (continued)  
VBATT  
VO = 5V/1.5A  
IO =  
VBATT  
LM317  
Adjust  
VREF/RS  
243Ω  
0.1%  
8.2KΩ  
CM431  
CM431  
RS  
0.1%  
243Ω  
0.1%  
Figure 8.Precision 5V, 1.5A Regulator  
Figure 9. Precision Constant Current Sink  
VBATT  
IO  
RCL  
0.1%  
IN  
OUT  
VBATT  
VO  
78L05  
Common  
CM431  
R1  
R1  
R2  
CM431  
IOUT = (VREF/RCL) + IKA  
R1 = VBATT/((IO/hFE) + IKA)  
VO = (1 + R1/R2) × VREF  
Min VO = VREF + 5V  
Figure 10. Output Control of a Three-Terminal  
Figure 11. Precision Current Limiter  
Fixed Regulator  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 8  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
3-Pin Plastic TO-92 Package Dimension  
INCHES  
MILLIMETERS  
MIN TYP MAX MIN TYP MAX  
0.175 0.180 0.205 4.45 4.57 5.21  
0.170 0.180 0.210 4.32 4.57 5.33  
0.125 0.142 0.165 3.18 3.62 4.19  
A
B
C
F
B
K
A
G
-
-
-
0.015  
0.050  
0.150  
-
-
-
-
-
-
-
-
-
0.38  
1.27  
3.81  
-
-
-
-
-
-
F
G
J
C
K
M
N
0.500 0.580  
12.70 14.73  
N
-
-
5º  
5º  
-
-
5º  
5º  
3-Pin Plastic TO-92 Carrier Dimensions  
P
P1  
INCHES  
MILLIMETERS  
MIN TYP MAX MIN TYP MAX  
0.079 2.00  
0.480 0.500 0.520 12.2 12.7 13.2  
C
C
P
-
-
-
-
Ho  
Wo  
W1  
Po 0.488 0.500 0.512 12.4 12.7 13.0  
Do 0.150 0.157 0.165 3.8 4.0 4.2  
P1 0.230 0.250 0.256 5.85 6.35 6.85  
Fo 0.165 0.197 0.220 4.2 5.0 5.6  
0.669 0.709 0.748 17.0 18.0 19.0  
Ho 0.610 0.630 0.649 15.5 16.0 16.5  
W
W
F1  
Do  
Po  
Fo  
Wo 0.224 0.236 0.248 5.7  
W1 0.335 0.354 0.374 8.5  
6.0  
9.0  
6.3  
9.5  
Note: For TO-92, 2,500 units per ammo  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 9  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
Surface Mount SOT-23  
INCHES  
MILLIMETERS  
MIN TYP MAX MIN TYP MAX  
0.039 0.043 0.051 1.00 1.10 1.30  
D
C
A
L
A1 0.000  
-
0.004 0.00  
-
0.10  
A2 0.028 0.032 0.035 0.70 0.80 0.90  
H
E
b
C
D
E
e
0.014 0.016 0.020 0.35 0.40 0.50  
0.004 0.005 0.010 0.10 0.15 0.25  
0.106 0.114 0.122 2.70 2.90 3.10  
0.055 0.063 0.071 1.40 1.60 1.80  
M
e
0.075 TYP.  
1.90 TYP.  
A
H
L
0.102 0.110 0.118 2.60 2.80 3.00  
A2  
0.015  
-
-
0.37  
-
-
A1  
b
M
1°  
5°  
9°  
1°  
5°  
9°  
Surface Mount SOT-23 Carrier Dimensions  
A
B
M
MILLIMETERS  
E
A
M
N
4.0 ± 0.1  
1.5 ± 0.1  
1.1 ± 0.1  
B
C
D
E
F
2.0 ± 0.05  
4.0± 0.1  
D
F
2.5 ± 0.05  
1.75 ± 0.1  
6.0 ± 0.2  
N
C
DIRECTION OF FEED  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 10  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
SOT-89 Package Dimension  
D
D1  
φ1.0  
C
e
e1  
A
L
b
b1  
C
D
D1  
H
E
e1  
e
b
b
b1  
8-Pin Plastic S.O.I.C.  
PIN 1 ID  
θ
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 11  
CM431  
LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR  
IMPORTANT NOTICE  
Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to  
discontinue any integrated circuit product or service without notice, and advises its customers to obtain the  
latest version of relevant information to verify, before placing orders, that the information being relied on is  
current.  
A few applications using integrated circuit products may involve potential risks of death, personal injury, or  
severe property or environmental damage. CMC integrated circuit products are not designed, intended,  
authorized, or warranted to be suitable for use in life-support applications, devices or systems or other  
critical applications. Use of CMC products in such applications is understood to be fully at the risk of the  
customer. In order to minimize risks associated with the customer’s applications, the customer should  
provide adequate design and operating safeguards.  
HsinChu Headquarter  
5F, No. 11, Park Avenue II,  
Science-Based Industrial Park,  
HsinChu City, Taiwan  
Sales & Marketing  
7F-6, No.32, Sec. 1, Chenggong Rd.,  
Nangang District, Taipei City 115,  
Taiwan , R.O.C.  
TEL: +886-3-5679979  
T E L : +886-2-2788 0558  
F A X : +886-2-2788 2985  
FAX: +886-3-5679909  
2006/10/11 Rev.1.4  
Champion Microelectronic Corporation  
Page 12  

相关型号:

CM431BCS

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431DCM233

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431DCM2R3

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431DCM89

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431DCN

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431DCS

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431GACM233

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431GACM2R3

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431GACM89

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431GACN

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431GACS

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP

CM431GBCM233

LOW VOLTAGE ADJUSTABLE SHUNT REGULATOR
CHAMP