CG2415M6-C2 [CEL]
L, S-band High Power SPDT RF Switch;型号: | CG2415M6-C2 |
厂家: | CALIFORNIA EASTERN LABS |
描述: | L, S-band High Power SPDT RF Switch 光电二极管 |
文件: | 总10页 (文件大小:767K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RF SWITCH
L, S-band High Power SPDT RF Switch
DESCRIPTION
PACKAGE
The CG2415M6 is a pHEMT GaAs MMIC high
power SPDT (Single Pole Double Throw) switch
which was developed for dual-band wireless LAN.
6-pin lead-less mini mold package
(1.5mm x 1.1mm x 0.55mm)
FEATURES
Control voltage :
VC(H) = 1.8 to 5.3 V (3.0 V TYP.)
VC(L) = -0.2 to 0.2 V (0 V TYP.)
Low insertion loss :
Lins1 = 0.30 dB TYP. @ f = 0.5 to 2.0 GHz
Lins2 = 0.35 dB TYP. @ f = 2.0 to 2.5 GHz
Lins3 = 0.40 dB TYP. @ f = 2.5 to 3.8 GHz
Lins4 = 0.45 dB TYP. @ f = 3.8 to 6.0 GHz
High isolation :
ISL1 = 32 dB TYP. @ f = 0.5 to 2.0 GHz
ISL2 = 32 dB TYP. @ f = 2.0 to 2.5 GHz
ISL3 = 32 dB TYP. @ f = 2.5 to 3.8 GHz
ISL4 = 26 dB TYP. @ f = 3.8 to 6.0 GHz
Power handling :
APPLICATIONS
Dual-band wireless
LAN (IEEE 802.11 a/b/g/n/ac)
Pin(0.5dB) = +34 dBm TYP
VC(H) = 3.0 V, VC(L) = 0 V
ORDERING INFORMATION
Part Number
CG2415M6
Order Number
CG2415M6-C2
Package
6-pin lead-less
mini mold
Marking
C0A
Description
• Embossed tape 8 mm wide
• Pin 1, 6 face the perforation
side of the tape
package
(Pb-Free)
• MOQ 9 kpcs/reel
CG2415M6-EVAL CG2415M6-EVAL
• Evaluation Board with DC
block capacitors, power
supply bypass capacitors,
and RF and DC connectors
• MOQ 1
This document is subject to change without notice.
Date Published: September 2017
CDS-0022-04 (Issue G)
1
CG2415M6
PIN CONFIGURATION AND
INTERNAL BLOCK DIAGRAM
TRUTH TABLE
VC1
High
Low
VC2
Low
High
RFC-RF1
ON
RFC-RF2
OFF
OFF
ON
ABSOLUTE MAXIMUM RATINGS
A
(T = +25˚C, unless otherwise specified)
Parameter
Control Voltage
Symbol
VC
Rating
6.0Note 1
Unit
V
+34.5Note 2
Input Power
Pin
dBm
˚C
-45 +85
~
Operating Ambient Temperature
Storage Temperature
TA
-55 +150
~
Tstg
˚C
Note 1. |VC1 - VC2| 6.0 V
≦
2. 3.0V |VC1 – VC2| 5.0V
≦
≦
RECOMMENDED OPERATING RANGE
A
(T = +25˚C, unless otherwise specified)
Parameter
Operating Frequency
Symbol
f
MIN.
TYP.
MAX.
Unit
GHz
V
0.5
+1.8
-0.2
-
+3.0
0
6.0
Switch Control Voltage (H)
Switch Control Voltage (L)
VC(H)
VC(L)
+5.3
+0.2
V
This document is subject to change without notice.
2
CG2415M6
ELECTRICAL CHARACTERISTICS 1
A
(T = +25˚C, VC(H) = 3.0 V, VC(L) = 0 V, Zo = 50 Ω, DC Block Capacitance = 8 pF, unless otherwise specified)
Parameter
Symbol
Condition
f=0.5 to 2.0 GHz Note 1
f=2.0 to 2.5 GHz
f=2.5 to 3.8.0GHz
f=3.8 to 6.0GHz
MIN.
-
TYP.
0.30
0.35
0.40
0.45
32
MAX.
Unit
dB
Insertion Loss
LINS
LINS
LINS
LINS
1
2
3
4
0.50
-
0.55
dB
-
0.60
dB
-
0.70
dB
f=0.5 to 2.0 GHz Note 1
f=2.0 to 2.5 GHz
f=2.5 to 3.8.0GHz
f=3.8 to 6.0GHz
Isolation
ISL1
ISL2
ISL3
ISL4
RL1
RL2
29
29
29
23
15
15
10
-
-
-
-
-
-
-
-
-
-
dB
32
dB
32
dB
26
dB
f=0.5 to 2.0GHz Note 1
f=2.0 to 2.5GHz
Return Loss
20
dB
20
dB
RL3
f=2.5 to 6.0GHz
15
dB
f=0.5 to 2.0GHz Note1
0.1dB Loss Compression Input
Pin(0.1dB)
+32
+31
dBm
dBm
Power
Note 2
f=2.0 to 6.0GHz
-
f=0.5 to 6.0GHzNote1
VC(H)=5.0V
-
+35
-
dBm
f=0.5 to 2.0GHz Note1
0.5dB Loss Compression Input
Power
Note 3
Pin(0.5dB)
-
-
-
-
-
-
+34
+34
-90
-90
-90
-90
-
-
-
-
-
-
dBm
dBm
dBc
dBc
dBc
dBc
f=2.0 to 6.0GHz
2nd Harmonics
2f0
f=2.5GHz, Pin=+20dBm
f=6.0GHz, Pin=+20dBm
f=2.5GHz, Pin=+20dBm
f=6.0GHz, Pin=+20dBm
3rd Harmonics
3f0
3rd Order Input Intercept Point
IIP3
f=2.5GHz, 2-tone
1MHz Spacing
-
60
-
dBm
Note 1. DC block capacitance = 56 pF at f = 0.5 to 2.0 GHz
Note 2. Pin(0.1dB) is the measured input power level when the insertion loss increases 0.1dB more than that of
the linear range.
Note 3. Pin(0.5dB) is the measured input power level when the insertion loss increases 0.5dB more than that of the linear
range
This document is subject to change without notice.
3
CG2415M6
ELECTRICAL CHARACTERISTICS 2
A
(T = +25˚C, VC(H) = 3.0 V, VC(L) = 0 V, Zo = 50 Ω, DC Block Capacitance = 8 pF, unless otherwise specified)
Error Vector Magnitude
EVM
802.11a, 64QAM, 54Mbps,
-
-
0.5
0.5
-
-
%
%
Pin +25dBm
≦
802.11g, 64QAM, 54Mbps,
Pin≦+25dBm
802.11ac, 256QAM, MCS9,
-
0.5
-
%
80MHz, Pin≦+25dBm
Switch Control Current
Switching Speed
ICONT
tSW
RF none
-
-
2
10
uA
ns
50% CTL to 90/10% RF
100
250
This document is subject to change without notice.
4
CG2415M6
TYPICAL CHARACTERISTICS
(VC(H)=3V, VC(L)=0V, TA = +25˚C, DC Block Capacitance=8pF, through board loss is subtracted in insertion loss data)
Typical Insertion Loss vs. Frequency
Typical Isolation vs. Frequency
Typical Insertion Loss vs.
Input Power
Typical Return Loss vs. Frequency
This document is subject to change without notice.
5
CG2415M6
EVALUATION CIRCUIT
Note
C0 :0.5 to 2.0 GHz
56pF
8pF
: 2.0 to 6.0 GHz
The application circuits and their parameters are for reference only and are not intended for use in actual designs.
DC Blocking Capacitors are required at all RF ports.
PACKAGE DIMENSIONS
6-pin lead-less mini mold package (Unit: mm)
This document is subject to change without notice.
6
CG2415M6
RECOMMENDED SOLDERING CONDITIONS
Recommended Soldering Conditions are available on CEL's Part Summary page under Associated Documents
This document is subject to change without notice.
7
CG2415M6
REVISION HISTORY
Version
CDS-0022-01 (Issue A)
February 17, 2016
Change to current version
Page(s)
N/A
Initial datasheet
CDS-0022-02 (Issue B)
March 11, 2016
Added Eval Board ordering information
Added Package Photo
1
1
CDS-0022-02 (Issue C)
March 16, 2016
CDS-0022-02 (Issue D)
April 4, 2016
Updated marking information and MOQ
Removed “preliminary”
1,2
CDS-0022-02 (Issue E)
August 11, 2016
All
CDS-0022-02 (Issue F)
January 11, 2017
Revised Electrical Characteristics table
Added “Recommended Soldering Conditions” section
3, 5
3, 4, 5
CDS-0022-04 (Issue G)
September 15, 2017
Updated Characteristics tables and added Error Vector Magnitude
Added “Typical Characteristics” graphs section
This document is subject to change without notice.
8
CG2415M6
[CAUTION]
・ All information included in this document is current as of the date this document is issued. Such information,
however, is subject to change without any prior notice.
・ You should not alter, modify, copy, or otherwise misappropriate any CEL product, whether in whole or in part.
・ CEL does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of
third parties by or arising from the use of CEL products or technical information described in this document. No
license, expressed, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual
property rights of CEL or others.
・ Descriptions of circuits, software and other related information in this document are provided only to illustrate the
operation of semiconductor products and application examples. You are fully responsible for the incorporation of
these circuits, software, and information in the design of your equipment. CEL assumes no responsibility for any
losses incurred by you or third parties arising from the use of these circuits, software, or information.
・ CEL has used reasonable care in preparing the information included in this document, but CEL does not warrant
that such information is error free. CEL assumes no liability whatsoever for any damages incurred by you resulting
from errors in or omissions from the information included herein.
・ Although CEL endeavors to improve the quality and reliability of its products, semiconductor products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions.
Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or
damage caused by fire in the event of the failure of a CEL product, such as safety design for hardware and software
including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging
degradation or any other appropriate measures
Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final
products or system manufactured by you.
・ Please use CEL products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive.
CEL assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and
regulations.
・ This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent
of CEL.
・ Please contact CEL if you have any questions regarding the information contained in this document or CEL
products, or if you have any other inquiries.
This document is subject to change without notice.
9
CG2415M6
[CAUTION]
This product uses gallium arsenide (GaAs) of the toxic substance appointed in laws and ordinances.
GaAs vapor and powder are hazardous to human health if inhaled or ingested.
・Do not dispose in fire or break up this product.
・Do not chemically make gas or powder with this product.
・When discarding this product, please obey the laws of your country.
・Do not lick the product or in any way allow it to enter the mouth.
[CAUTION]
Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can
damage this device. This device must be protected at all times from ESD. Static charges may easily
produce potentials of several kilovolts on the human body or equipment, which can discharge
without detection. Industry-standard ESD precautions should be used at all times.
CEL Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054 • Tel: (408) 919-2500 • www.cel.com
For a complete list of sales offices, representatives and distributors,
Please visit our website: www.cel.com/contactus
For inquiries email us at rfw@cel.com
This document is subject to change without notice.
10
相关型号:
CG241T450V4C
Reliable Screw Terminal Aluminum Electrolytic Capacitor 85 ⅹC, Screw Terminal Capacitors
CDE
©2020 ICPDF网 联系我们和版权申明