SMAJ180A-H [BOURNS]
TVS DIODE 180V 292V SMA;
| 型号： | SMAJ180A-H |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | TVS DIODE 180V 292V SMA 电视 |
| 文件： | 总6页 (文件大小：554K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
Applications
nꢀ RoHSꢀcompliant*
nꢀ IECꢀ61000-4-2ꢀESDꢀ(Min.ꢀLevelꢀ4)
nꢀ IECꢀ61000-4-4ꢀEFT
nꢀ SurfaceꢀMountꢀSMAꢀpackage
nꢀꢀStandoffꢀVoltage:ꢀ5.0ꢀtoꢀ495ꢀvolts
nꢀ PowerꢀDissipation:ꢀ400ꢀwatts
nꢀ ULꢀRecognizedꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
nꢀ IECꢀ61000-4-5ꢀSurge
SMAJ Transient Voltage Suppressor Diode Series
General Information
Agency Recognition
The markets of portable communications, computing and video
equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Description
UL
File Number: E153537
Bourns offers Transient Voltage Suppressor Diodes for surge and
ESD protection applications, in compact chip package DO-214AC
(SMA) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495 V and
Breakdown Voltage up to 550 V. Typical fast response times are less than 1.0 picoseconds for unidirectional devices and less than 5.0
picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)
A
Parameter
Symbol
Value
Unit
(Note 1,2)
Minimum Peak Pulse Power Dissipation (T = 1 ms)
P
P
400
Watts
PK
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method)
I
40
Amps
FSM
(Note 3)
Steady State Power Dissipation @ TL = 75 °C
P
1.0
Watts
Volts
M(AV)
SMAJ5.0A ~ SMAJ90A
SMAJ100A ~ SMAJ495A
Maximum Instantaneous Forward Voltage @ I = 35 A
PP
3.5
5.0
V
F
J
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
T
-55 to +150
-55 to +150
°C
°C
T
STG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 °C per Pulse Derating Curve.
A
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
How to Order
SMAJ 5.0 CA - H
Package
SMAJ = SMA/DO-214AC
Asia-Pacific:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Working Peak Reverse Voltage
5.0 = 5.0 V
(Volts)
RWM
Suffix
Europe:
Tel: +36 88 885 877
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
Email: eurocus@bourns.com
Reel
(blank) = 13 inch reel
-H = 7 inch reel
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SMAJ Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)
A
Maximum Maximum Maximum Maximum
Working Maximum
Clamping
Voltage
Peak
Pulse
Clamping
Voltage
Peak
Pulse
Unidirectional
Device
Breakdown Voltage
(Volts)
Peak
Reverse
Leakage
Bidirectional Device
V
Reverse
Voltage
BR
@ I
Current
(10/1000 µs)
@ I
Current
(8/20 µs)
pp
pp
@ V
RWM
(10/1000 µs)
(8/20 µs)
@ I
(mA)
V
I
V
c
(V)
I
V
c
(V)
I
T
RWM
(V)
R
pp
pp
Part No. Marking
Part No.
Marking Min. Max.
(μA)
(A)
(A)
SMAJ5.0A
SMAJ6.0A
SMAJ6.5A
SMAJ7.0A
SMAJ7.5A
SMAJ8.0A
SMAJ8.5A
SMAJ9.0A
SMAJ10A
SMAJ11A
SMAJ12A
SMAJ13A
SMAJ14A
SMAJ15A
SMAJ16A
SMAJ17A
SMAJ18A
SMAJ20A
SMAJ22A
SMAJ24A
SMAJ26A
SMAJ28A
SMAJ30A
SMAJ33A
SMAJ36A
SMAJ40A
SMAJ43A
SMAJ45A
SMAJ48A
SMAJ51A
SMAJ54A
SMAJ58A
SMAJ60A
SMAJ64A
SMAJ70A
SMAJ75A
SMAJ78A
SMAJ85A
SMAJ90A
SMAJ100A
SMAJ110A
SMAJ120A
SMAJ130A
SMAJ150A
SMAJ160A
SMAJ170A
SMAJ180A
SMAJ200A
SMAJ220A
SMAJ250A
SMAJ300A
SMAJ350A
SMAJ400A
SMAJ434A
SMAJ440A
SMAJ495A
HE
HG
HK
HM
HP
HR
HT
HV
HX
HZ
IE
IG
IK
IM
IP
IR
IT
IV
IX
SMAJ5.0CA
SMAJ6.0CA
SMAJ6.5CA
SMAJ7.0CA
SMAJ7.5CA
SMAJ8.0CA
SMAJ8.5CA
SMAJ9.0CA
SMAJ10CA
SMAJ11CA
SMAJ12CA
SMAJ13CA
SMAJ14CA
SMAJ15CA
SMAJ16CA
SMAJ17CA
SMAJ18CA
SMAJ20CA
SMAJ22CA
SMAJ24CA
SMAJ26CA
SMAJ28CA
SMAJ30CA
SMAJ33CA
SMAJ36CA
SMAJ40CA
SMAJ43CA
SMAJ45CA
SMAJ48CA
SMAJ51CA
SMAJ54CA
SMAJ58CA
SMAJ60CA
SMAJ64CA
SMAJ70CA
SMAJ75CA
SMAJ78CA
SMAJ85CA
SMAJ90CA
SMAJ100CA
SMAJ110CA
SMAJ120CA
SMAJ130CA
SMAJ150CA
SMAJ160CA
SMAJ170CA
SMAJ180CA
SMAJ200CA
SMAJ220CA
SMAJ250CA
SMAJ300CA
SMAJ350CA
SMAJ400CA
TE
TG
TK
TM
TP
TR
TT
TV
6.40 7.00
6.67 7.37
7.22 7.98
7.78 8.60
8.33 9.21
8.89 9.83
9.44 10.4
10
10
10
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
800
800
500
200
100
50
20
10
5
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
292
324
356
405
486
567
648
698
713
760
43.5
38.8
35.7
33.3
31.0
29.4
27.8
26.0
23.5
22.0
20.1
18.6
17.2
16.4
15.4
14.5
13.7
12.3
11.3
10.3
9.5
8.8
8.3
7.5
6.9
6.2
5.8
5.5
5.2
4.9
4.6
4.3
4.1
3.9
3.5
3.3
3.2
2.9
2.7
2.5
2.3
2.1
1.9
1.6
1.5
1.5
1.4
1.2
1.1
1.0
0.8
0.7
0.6
12.0
13.4
14.6
15.6
16.8
17.7
18.7
20.0
22.1
23.7
25.9
28.0
30.2
31.7
33.8
35.9
38.0
42.1
46.2
50.6
54.7
59.0
62.9
69.3
75.5
217.5
194.0
178.5
166.5
155.0
147.0
139.0
130.0
117.5
110.0
100.5
93.0
86.0
82.0
77.0
72.5
68.5
61.5
56.5
51.5
47.5
44.0
41.5
37.5
34.5
31.0
29.0
27.5
26.0
24.5
23.0
21.5
20.5
19.5
17.5
16.5
16.0
14.5
13.5
12.5
11.5
10.5
9.5
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10.0
11.1
11.1
12.3
TX
TZ
12.2 13.5
13.3 14.7
14.4 15.9
15.6 17.2
16.7 18.5
17.8 19.7
18.9 20.9
20.0 22.1
22.2 24.5
24.4 26.9
26.7 29.5
28.9 31.9
31.1 34.4
33.3 36.8
36.7 40.6
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
UE
UG
UK
UM
UP
UR
UT
UV
UX
UZ
VE
VG
VK
VM
VP
VR
VT
IZ
JE
JG
JK
JM
JP
JR
JT
JV
JX
JZ
RE
RG
RK
RM
RP
RR
RT
RV
RX
RZ
SE
SG
SK
SM
SP
SR
ST
SV
SX
SZ
FE
FG
FK
40
44.2
44.4 49.1
47.8 52.8
83.9
90.2
94.5
VV
VX
VZ
50
55.3
53.3 58.9
56.7 62.7
100.6
107.1
113.2
121.7
125.8
133.9
146.9
157.3
163.8
178.1
189.8
210.6
230.1
250.9
271.7
315.9
336.7
357.5
379.6
421.2
462.8
526.5
631.8
737.1
842.4
907.4
926.9
988.0
WE
WG
WK
WM
WP
WR
WT
WV
WX
WZ
XE
XG
XK
XM
XP
XR
XT
XV
XX
XZ
GE
GG
GK
434D
GM
495D
60
66.3
64.4 71.2
66.7 73.7
71.1 78.6
77.8 86.0
83.3 92.1
86.7 95.8
94.4
100
111
104
111
123
135
147
159
185
197
209
222
247
272
309
371
432
494
535
543
578
85
90
100
110
120
130
150
160
170
180
200
220
250
300
350
400
434
440
495
122
133
144
167
178
189
201
224
246
279
335
391
447
485
492
522
8.0
7.5
7.5
7.0
6.0
5.5
5.0
4.0
3.5
3.0
2.9
3.0
434U SMAJ434CA
FM SMAJ440CA
495U SMAJ495CA
0.6
0.6
0.5
2.6
Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device.
2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device.
3. For bidirectional devices with a V of 10 volts or less, the I limit is double.
R R
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SMAJ Transient Voltage Suppressor Diode Series
Product Dimensions
Recommended Footprint
A
A
B
C
B
C
G
Dimension
SMA (DO-214AC)
2.70
A (Max.)
(0.106)
2.10
(0.083)
1.27
F
D
H
B (Min.)
C (Min.)
E
(0.050)
Dimension
SMA (DO-214AC)
3.99 - 4.50
(0.157 - 0.177)
2.54 - 2.79
(0.100 - 0.110)
1.25 - 1.65
(0.049 - 0.065)
0.15 - 0.31
ꢀ
MM
(INCHES)
A
DIMENSIONS:
ꢀ
B
C
D
E
F
Physical Specifications
Case...........................................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
(0.006 - 0.012)
4.93 - 5.28
(0.194 - 0.208)
Weight ...........................................................................0.064 grams
0.203
(0.008)
MAX.
Typical Part Marking
1.98 - 2.29
(0.078 - 0.090)
0.76 - 1.52
G
H
DATEꢀCODE:
MANUFACTURER’S
ꢀꢀꢀꢀYꢀ=ꢀLASTꢀ
TRADEMARK
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀDIGITꢀOFꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀYEAR
(0.030 - 0.060)
WWꢀ=ꢀWEEKꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNUMBER
YWW
XXXX
DEVICEꢀID
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SMAJ Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve
Maximum Non-Repetitive Surge Current
100
60
50
75
50
25
40
30
20
10
PulseꢀWidthꢀ8.3ꢀms
SingleꢀHalfꢀSine-Wave
10ꢀxꢀ1000ꢀWaveformꢀasꢀDefined
byꢀR.E.A.
0
0
1
2
5
10
20
50
100
0
25
50
75
100
125
150
175
200
NumberꢀofꢀCyclesꢀatꢀ60ꢀHz
AmbientꢀTemperatureꢀ(°C)
Pulse Waveform
Typical Junction Capacitance
10000
TR=10ꢀµs
Peakꢀvalueꢀ(IRSM)
IRSM
TAꢀ=ꢀ25ꢀ°C
100
Halfꢀvalue=
2
1000
100
0
Unidirectional
Pulseꢀwidthꢀ(TP)ꢀ
isꢀdefinedꢀasꢀthatꢀpointꢀ
whereꢀtheꢀpeakꢀcurrent
decaysꢀtoꢀ50ꢀ%ꢀofꢀIPSM.
Bidirectional
50
10ꢀxꢀ1000ꢀwaveform
asꢀdefinedꢀbyꢀR.E.A.
TA=25ꢀ°C
TP
0
0
1.0
2.0
3.0
4.0
0
10
100
StandoffꢀVoltageꢀ(Volts)
1000
T,ꢀTimeꢀ(ms)
Pulse Rating Curve
Steady State Power Derating Curve
ꢀꢀ10
1.0
0.8
0.6
1.0
0.4
0.2
T ꢀ=ꢀ25ꢀ°C
A
Non-repetitive
PulseꢀWaveform
60ꢀHzꢀResistiveꢀor
ShownꢀinꢀPulseꢀWaveformꢀGraph
InductiveꢀLoad
0.0
0.1
0.1ꢀµs
0
25
50
75
100
125
150
175
200
1.0ꢀµs
10ꢀµs
100ꢀµs
1.0ꢀms
10ꢀms
TL,ꢀLeadꢀTemperatureꢀ(°C)
T ,ꢀPulseꢀWidthꢀ(Seconds)
d
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SMAJ Transient Voltage Suppressor Diode Series
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
P
0
P
T
E
1
d
IndexꢀHole
120ꢀ°
F
D
2
W
B
D
D
1
P
A
C
Unidirectional
Product
Trailer
Device
Leader
Orientation
W
.......
.......
.......
.......
.......
.......
.......
.......
1
End
Start
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
10ꢀpitchesꢀ(min.)
10ꢀpitchesꢀ(min.)
DirectionꢀofꢀFeed
Devices are packed in accordance with EIA 481
standard specifications shown here.
Item
Symbol
SMA (DO-214AC)
13 Inch Reel
7 Inch Reel
2.90 ± 0.20
(0.114 ± 0.008)
5.50 ± 0.20
(0.217 ± 0.008)
2.26 ± 0.20
(0.089 ± 0.008)
1.50 ± 0.10
(0.061 ± 0.004)
Carrier Width
Carrier Length
Carrier Depth
Sprocket Hole
A
B
C
d
178
(7.008)
330
(12.992)
Reel Outside Diameter
Reel Inner Diameter
Feed Hole Diameter
Sprocket Hole Position
Punch Hole Position
Punch Hole Pitch
D
50.0
MIN.
D
D
1
(1.969)
13.0 ± 0.20
(0.512 ± 0.008)
1.75 ± 0.10
(0.069 ± 0.004)
5.50 ± 0.05
(0.217 ± 0.002)
4.00 ± 0.10
(0.157 ± 0.004)
2
E
F
P
4.00 ± 0.10
(0.157 ± 0.004)
2.00 ± 0.05
(0.079 ± 0.002)
0.30 ± 0.10
(0.012 ± 0.004)
12.00 ± 0.30
(0.472 ± 0.012)
Sprocket Hole Pitch
Embossment Center
Overall Tape Thickness
Tape Width
P
0
1
P
T
W
18.4
(0.724)
Reel Width
W
1
MAX.
Quantity per Reel
--
1,000
5,000
REV. 08/20
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号：
©2020 ICPDF网 联系我们和版权申明