SF-0603HI200F-2 [BOURNS]
High Inrush Current Withstand Surface Mount Fuses;型号: | SF-0603HI200F-2 |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | High Inrush Current Withstand Surface Mount Fuses |
文件: | 总5页 (文件大小:570K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SinglFuse™ꢀSF-0603HIxxxFꢀSeriesꢀFeatures
nꢀ Singleꢀblowꢀfuseꢀforꢀovercurrentꢀ
protection
nꢀ Surfaceꢀmountꢀpackagingꢀforꢀautomatedꢀ
assembly
nꢀ 1608ꢀ(EIAꢀ0603)ꢀminiatureꢀfootprint
nꢀ Highꢀinrushꢀcurrentꢀwithstandꢀfuse
nꢀ ULꢀ248-14ꢀlisted
nꢀ RoHSꢀcompliant*ꢀandꢀhalogenꢀfree**
nꢀ Thinꢀfilmꢀchipꢀdesign
SF-0603HIxxxFꢀSeriesꢀ-ꢀHighꢀInrushꢀCurrentꢀWithstandꢀSurfaceꢀMountꢀFuses
Electrical Characteristics
Rated Current
(Amps)
Resistance
(Ω) Typ.***
0.1550
Rated
Voltage
Interrupting
Rating
Typical
I2t (A2s) ****
0.019
Model
Fusing Time
SF-0603HI050F-2
SF-0603HI075F-2
SF-0603HI100F-2
SF-0603HI150F-2
SF-0603HI200F-2
SF-0603HI250F-2
SF-0603HI300F-2
SF-0603HI350F-2
SF-0603HI400F-2
0.50
0.75
1.00
1.50
2.00
2.50
3.00
3.50
4.00
0.0830
0.0500
0.0290
0.0200
0.0165
0.0140
0.0120
0.0095
0.036
0.052
0.110
0.310
0.400
0.600
0.800
1.200
AC/DC 35 V 50 A
DC 65 V 13 A
DC 65 V
DC 35 V
Open within 60
sec. at 200 %
rated current
AC/DC 35 V 35 A
AC/DC 24 V 50 A
***ꢀ Resistanceꢀvalueꢀmeasuredꢀwithꢀ≤10ꢀ%ꢀratedꢀcurrentꢀatꢀ25ꢀ°Cꢀambient.
2
**** Melting I t calculated at 0.001 second pre-arcing time.
Reliability Testing
No.
Test
Requirement
Test Condition
Test Reference
≤1ꢀA:ꢀDCRꢀchangeꢀ≤ꢀ±10ꢀ%
>1ꢀA:ꢀDCRꢀchangeꢀ≤ꢀ±20ꢀ%
Refer to STP
document
1
Bending
2 mm
MIL-STD-202
Method 208
2
3
4
5
6
7
Solderability
Minimum 95 % coverage
Oneꢀdipꢀatꢀ255ꢀ°Cꢀforꢀ5ꢀseconds
100ꢀcyclesꢀbetweenꢀ-55ꢀ°Cꢀandꢀ+125ꢀ°C
10ꢀcycles
DCRꢀchangeꢀ≤ꢀ±10ꢀ%
No mechanical damage
MIL-STD-202
Method 107
Thermal shock
Moisture resistance
Saltꢀspray
DCRꢀchangeꢀ≤ꢀ±10ꢀ%ꢀ
No excessive corrosion
MIL-STD-202
Method 106
DCRꢀchangeꢀ≤ꢀ±10ꢀ%ꢀ
No excessive corrosion
MIL-STD-202
Method 101
48 hour exposure, 5 % salt solution
DCRꢀchangeꢀ≤ꢀ±10ꢀ%ꢀ
No mechanical damage
0.4ꢀinchꢀD.A.ꢀorꢀ30ꢀGꢀbetweenꢀ
5-3000 Hz
MIL-STD-202
Method 204
Mechanicalꢀvibration
Mechanical shock
DCRꢀchangeꢀ≤ꢀ±10ꢀ%ꢀ
No mechanical damage
MIL-STD-202
Method 213
1500 G, 0.5 ms, half-sine shocks
No electrical “opens” during testing
Voltageꢀdropꢀchangeꢀshallꢀbeꢀlessꢀ
thanꢀ±10ꢀ%ꢀofꢀinitialꢀvalue
75 % rated current for 2000 hours at
ambientꢀtemperatureꢀbetweenꢀ
+20ꢀ°Cꢀandꢀ+30ꢀ°C
Refer to STP
document
8
Life
Agency Recognition
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
ULꢀFileꢀNumber .................................................... E198545
http://www.ul.com/ꢀꢀ FollowꢀlinkꢀtoꢀOnlineꢀCertificatesꢀDirectory,ꢀ
then enter UL File No. E198545, or click here
*ꢀꢀꢀ RoHSꢀDirectiveꢀ2002/95/ECꢀJan.ꢀ27,ꢀ2003ꢀincludingꢀannexꢀandꢀRoHSꢀRecastꢀ2011/65/EUꢀJuneꢀ8,ꢀ2011.ꢀ
**ꢀ Bournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀandꢀꢀ
ꢀ
Chlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.
“SinglFuse”ꢀisꢀaꢀtrademarkꢀofꢀBourns,ꢀInc.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
SinglFuse™ꢀSF-0603HIxxxFꢀSeriesꢀApplications
nꢀ Portableꢀmemory
nꢀ LCDꢀmonitors
nꢀ Diskꢀdrives
nꢀ Cellꢀphones
nꢀ Rechargeableꢀbatteryꢀpacks
nꢀ Batteryꢀchargers
nꢀ LEDꢀlighting
nꢀ Powerꢀtools
nꢀ PDAs
nꢀ Set-topꢀboxes
nꢀ Digitalꢀcameras
nꢀ MP3ꢀplayers
nꢀ Industrialꢀcontrollers
nꢀ BatteryꢀManagementꢀSystemsꢀ(BMS)
ꢀ
SF-0603HIxxxFꢀSeriesꢀ-ꢀHighꢀInrushꢀCurrentꢀWithstandꢀSurfaceꢀMountꢀFuses
Environmental Characteristics
Operating Temperature..................................................................................................................................................................-55ꢀ°Cꢀtoꢀ+90ꢀ°C
Storage Conditions
Temperature ..............................................................................................................................................................................+5ꢀ°Cꢀtoꢀ+35ꢀ°Cꢀ
ꢀꢀꢀꢀꢀHumidity.........................................................................................................................................................................................40 % to 75 %
Shelf Life..........................................................................................................................................................2ꢀyearsꢀfromꢀmanufacturingꢀdate
MoistureꢀSensitivityꢀLevel...................................................................................................................................................................................... 1
ESDꢀClassificationꢀ(HBM)............................................................................................................................................................................ Class 6
Typical Part Marking
How to Order
Construction
SF - 0603 HI 015 F - 2
Representsꢀtotalꢀcontent.ꢀLayoutꢀmayꢀ
vary.
PCB
CuNi/Sn
SinglFuse™
Product Designator
SMD Footprint
F
0603 = 1608 (EIA 0603) size
FuseꢀBlowꢀType
HI = High Inrush Current Withstand
RATED CURRENT (A)
Rated Current
Cu/Sn
C = 0.50
D = 0.75
E = 1.00
T = 1.50
F = 2.00
J = 2.50
L = 3.00
N = 3.50
P = 4.00
050 ~ 400 (500 mA ~ 4.0 A)
EPOXY
StructureꢀType
ꢀ
Fꢀ=ꢀThinꢀfilm
Packaging Quantity
8,000 pieces per 7-inch reel
PackagingꢀType
- 2 = Tape & Reel
Product Dimensions
Recommended Pad Layout
1.60 0.10
(.063 .00ꢀ4
0.80
(.0314
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
0.36 0.10
(.01ꢀ .00ꢀ4
1.00
(.0394
0.81 0.10
(.032 .00ꢀ4
2.20
(.0874
0.36 0.10
(.01ꢀ .00ꢀ4
0.36 0.10
(.01ꢀ .00ꢀ4
0.36 0.10
(.01ꢀ .00ꢀ4
0.36 0.10
(.01ꢀ .00ꢀ4
Current Rating Thermal Derating Curve
140
120
100
80
60
40
20
0
-60
-40
-20
0
20
40
60
80
100
MAXIMUM OPERATING TEMPERATURE (°C)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
ꢀ
SF-0603HIxxxFꢀSeriesꢀ-ꢀHighꢀInrushꢀCurrentꢀWithstandꢀSurfaceꢀMountꢀFuses
Solder Reflow Recommendations
Profile Feature
Pb-Free Assembly
T
p
Preheatꢀ/ꢀSoak:
T
-5 °C
c
t
p
MAX. RAMP UP RATE = 3 °C/s
Temperature Min. (T
)
150ꢀ°C
200ꢀ°C
60~120 seconds
smin
MAX. RAMP DOWN RATE = 6 °C/s
Temperature Max. (T
)
smax
T
L
Time (t ) from (T
to T )
T
t
L
s
smin
smax
smax
PREHEAT AREA
Ramp Up Rate (T to T )
3ꢀ°Cꢀ/ꢀsecondꢀmax.
L
p
T
Liquidous Temperature (T )
217ꢀ°C
smin
L
Time (t )ꢀmaintainedꢀaboveꢀT
60~150 seconds
L
L
t
s
PeakꢀPackageꢀBodyꢀ
260ꢀ°C
Temperature (T )
p
Time (t )*ꢀwithinꢀ5ꢀ°Cꢀofꢀtheꢀ
specifiedꢀclassificationꢀtemperatureꢀ 30 seconds*
p
25
(T )
TIME 25 °C TO PEAK
c
Ramp Down Rate (T to T )
6ꢀ°Cꢀ/ꢀsecondꢀmax.
8 minutes max.
TIME
p
L
Timeꢀ25ꢀ°CꢀtoꢀPeakꢀTemperature
*ꢀToleranceꢀforꢀpeakꢀprofileꢀtemperatureꢀ(Tpꢀ)ꢀisꢀdefinedꢀasꢀaꢀ
supplier minimum and a user maximum.
2
Average Pre-Arcing Time vs. Current Curves
Average I t vs. t Curves
2.00 A
2.50 A
3.00 A
3.50 A
4.00 A
1.50 A
1.00 A
0.75 A
0.50 A
4.00 A
3.50 A
3.00 A
2.50 A
2.00 A
1.50 A
1.00 A
0.75 A
0.50 A
1000
100
100
10
10
1
1
0.1
0.1
0.01
0.001
0.0001
0.01
0.001
0.0001
0.1
1
10
100
0.0001 0.001
0.01
0.1
1
10
100
TIME (SECONDS)
CURRENT (A)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
ꢀ
SF-0603HIxxxFꢀSeriesꢀTapeꢀandꢀReelꢀPackagingꢀSpecifications
SF-0603HIxxxF Series
Tape Dimensions
per EIA 481-2
8.10ꢀ ꢀ0.20ꢀ
(.319ꢀ ꢀ.008)
W
4.0ꢀ ꢀ0.10ꢀ
(.157ꢀ ꢀ.004)
P
0
4.0ꢀ ꢀ0.10ꢀ
(.157ꢀ ꢀ.004)
P
1
2.0ꢀ ꢀ0.05ꢀ
(.079ꢀ ꢀ.002)
P
2
1.00ꢀ ꢀ0.10ꢀ
(.039ꢀ ꢀ.004)
A
0
1.80ꢀ ꢀ0.10ꢀ
(.071ꢀ ꢀ.004)
B
0
3.50ꢀ ꢀ0.05ꢀ
(.138ꢀ ꢀ.002)
F
1.75ꢀ ꢀ0.10ꢀ
(.069ꢀ ꢀ.004)
E
1
1.55ꢀ+ꢀ0.05ꢀ
(.061ꢀ+ꢀ.002)
D
0
PACKAGING:ꢀꢀPaperꢀtape,ꢀ8,000ꢀpcs.ꢀperꢀreel
13.40 0.ꢀ0
(.ꢀ3ꢂ .020ꢁ
0.8
0.6
0.4
0.2
60.20 0.ꢀ0
178.00 1.00
(2.370 .020ꢁ
(7.008 .03ꢂꢁ
DIA.
DIA.
2.20 0.30
(.087 .012ꢁ
13.20 +0.3/-0.2
(.ꢀ20 +.012/-.008ꢁ
2 0 .
DIA.
4 0 .
6 0 .
8 0 .
1.40 0.20
(.0ꢀꢀ .008ꢁ
1.20 0.20
(.047 .008ꢁ
E
1
D
0
P
P
2
0
W
F
B
0
P
1
A
O
K
O
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
DIRECTION OF UNREELING
REV. A 06/18
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
ꢀ
LegalꢀDisclaimerꢀNotice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
its affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current
and complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
their devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining
applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property
or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives
on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at
the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III
devices and generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications.
Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or
space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns
and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall
also apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18
相关型号:
©2020 ICPDF网 联系我们和版权申明