CHV0805-JW-104ELF [BOURNS]
RES SMD 100K OHM 5% 1/8W 0805;
| 型号： | CHV0805-JW-104ELF |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | RES SMD 100K OHM 5% 1/8W 0805 |
| 文件： | 总4页 (文件大小：781K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
Applications
nꢀ Highꢀvoltageꢀapplications
nꢀ Consumerꢀelectronics
nꢀ Thickꢀfilmꢀ
nꢀ Highꢀvoltage
nꢀ Wideꢀresistanceꢀrange
nꢀ RoHSꢀcompliant*
nꢀ UL/IECꢀ60950ꢀ&ꢀ60065ꢀcompatible
n ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀULꢀ1676ꢀrecognized
1
504
CHV Series - Thick Film High Voltage Chip Resistors
Agency Recognition
Additional Information
Click these links for more information:
Description
UL1676 File Number: E466353
PRODUCT
TECHNICAL
LIBRARY
INVENTORY
SAMPLES
CONTACT
Electrical Characteristics
Specification
Model
CHV0603
CHV0805
CHV1206
CHV2010
CHV2512
Power Rating @ 70 °C
0.1 W
0.125 W
0.25 W
-55 °C to +155 °C
800 V
0.5 W
1.0 W
Operating Temperature Range
Maximum Working Voltage
200 V
400 V
400 V
800 V
2000 V
3000 V
3000 V
4000 V
Maximum Overload Voltage
1600 V
1 %
E-96 + E-24
5 %
100 kW ~ 10 MW
Resistance Range
100 kW ~ 22 MW
100 kW ~ 100 MW
E-24
1 %
5 %
±100 PPM/°C
±200 PPM/°C
Temperature Coefficient
How to Order
CHV 2512 - F X - 1000 E LF
Environmental Characteristics
Test
Conditions
Specification
Short Time
Overload
5 times rated power or max overload
voltage for 5 seconds
Model
(CHV = Thick Film
D R ≤ ± (2 % + 0.1 Ω)
Over 95 % coverage
D R ≤ ± (1 % + 0.1 Ω)
High Voltage
Chip Resistor
Solderability
+245 ±5 ℃ for 3 ± 0.5 seconds
Resistance to
Solder Heat
+260 ±5 ℃ for 10 ±1 seconds
Size
•
•
•
0603 • 2010
0805 • 2512
1206
+40 ±2 ℃, 90~95 %
1.5 hours ON, 0.5 hours OFF
for 1000 hours at rated power
Load Life
Humidity
D R ≤ ± (5 % + 0.1 Ω)
D R ≤ ± (5 % + 0.1 Ω)
Resistance Tolerance
F = ±1 % (Use with “X”
TCR Code)
+70℃
Load Life
1.5 hours ON, 0.5 hours OFF
for 1000 hours at rated power
J = ±5 % (Use with “W”
TCR Code)
-55 ℃ (30 minutes),
+25 ℃ (2~3 minutes),
+155 ℃ (30 minutes),
+25 ℃ (2~3 minutes)
for five cycles
TCR
X = ±100 PPM/°C
W = ±200 PPM/°C
Temperature
Cycle
D R ≤ ± (5 % + 0.05 Ω)
Resistance Value
1 % Tolerance: First three digits are
significant, fourth digit represents
the number of zeroes to follow
Voltage
Coefficient of
Resistance
(VCR)
Max. Test Voltage: 500 V
VL: 10 % RCWV or Max. RCWV
VH: 100 % RCWV or Max. RCWV
R ≤ 1 MΩ: ±100 ppm/V
1 MΩ < R < 10 MΩ: ±200 ppm/V
R ≥ 10 MΩ: ±300 ppm/V
5 % Tolerance: First two digits are
significant, third digit represents
the number of zeroes to follow
Packaging
E = Paper tape:
• 5,000 pcs. on 7 ” plastic reel
(CHV0603, CHV0805, CHV1206)
• 4,000 pcs. on 7 ” plastic reel
(CHV2010, CHV2512)
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Termination
*ꢀ RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.ꢀ
LF = Tin-plated (RoHS compliant)
**ꢀ Bourns®ꢀproductsꢀhaveꢀnotꢀbeenꢀspecificallyꢀdesignedꢀandꢀtestedꢀforꢀFDAꢀClassꢀIIIꢀapplicationsꢀandꢀtheirꢀuseꢀinꢀsuch
applicationsꢀisꢀneitherꢀrecommendedꢀnorꢀsupported.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CHV Series - Thick Film High Voltage Chip Resistors
Soldering Profile
Construction
OVERCOAT
INNER ELECTRODE
300
250
Sn PLATING
Peakꢀ245ꢀ°C
200
RESISTIVE ELEMENT
190ꢀ°C
Ni PLATING
CERAMIC SUBSTRATE
10~15
seconds
150
60~120ꢀseconds
Derating Curve
100
50
0
100
80
60
40
20
0
0
10
50
100
150
200
250
Time (seconds)
-55
0
155
70
(°C) Ambient temperature
Product Dimensions
A
Model
Dim.
CHV0603
CHV0805
2.00 ± 0.10
CHV1206
CHV2010
CHV2512
1.60 ± 0.10
A
3.10 ± 0.10
5.00 ± 0.20
6.40 ± 0.20
B
100
(0.063 ± 0.004) (0.079 ± 0.004) (0.122 ± 0.004) (0.197 ± 0.008) (0.252 ± 0.008)
0.80 ± 0.10
(0.031 ± 0.004) (0.049 ± 0.004) (0.063 ± 0.004) (0.098 ± 0.008) (0.126 ± 0.008)
0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.65 ± 0.25 0.65 ± 0.25
(0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.026 ± 0.010) (0.026 ± 0.010)
0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.60 ± 0.25 0.90 ± 0.25
(0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.024 ± 0.010) (0.035 ± 0.010)
0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.60 ± 0.10 0.60 ± 0.15
(0.018 ± 0.004) (0.020 ± 0.004) (0.022 ± 0.004) (0.024 ± 0.004) (0.024 ± 0.006)
1.25 ± 0.10
1.60 ± 0.10
2.50 ± 0.20
3.20 ± 0.20
C
D
C
B
C
D
T
T
D
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
Recommended Land Pattern
Model
Dim.
L
CHV0603
CHV0805
CHV1206
CHV2010
CHV2512
0.90
(0.035)
1.30
(0.051)
1.80
(0.071)
3.00
(0.118)
3.70
(0.146)
A
B
L
A
1.00
(0.039)
1.15
(0.045)
1.30
(0.051)
1.50
(0.059)
1.60
(0.063)
B
3.00
(0.118)
3.50
(0.138)
4.70
(0.185)
6.80
(0.268)
7.60
(0.299)
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CHV Series - Thick Film High Voltage Chip Resistors
Resistor Markings
CHV0603
CHV0805
CHV1206
CHV2010
CHV2512
Marking Explanation
•
•
The chip color is red to identify high
voltage product.
CHV0805
CHV1206
CHV2010
CHV2512
1 % Tolerance: 4 digits, first three
digits are significant, fourth digit
represents the number of zeros to
follow.
CHV0603
CHV0603
301
1542
222
01C
•
5 % Tolerance: 3 digits, first two
digits are significant, third digit
represents the number of zeros to
follow.
3-Digit
4-Digit
3-Digit
3-Digit
E-24 ±5 % Marking E-96/E-24 Marking
E-24 ±1 % Marking E-96 ±1 % Marking
30 X 101
Value = 300 ohms
154 X 102
Value = 15.4K ohms
222 X 102
Value = 2.2K ohms
10 X 100
Value = 10 ohms
Packaging Dimensions - Tape
T
1.50ꢀ ꢀ0.10
(0.059ꢀ ꢀ0.004)
DIA.
4.00ꢀ ꢀ0.10
(0.157ꢀ ꢀ0.004)
1.75ꢀ ꢀ0.10
(0.069ꢀ ꢀ0.004)
2.0ꢀ ꢀ0.5
(0.079ꢀ ꢀ0.020)
13.0ꢀ ꢀ0.5
(0.512ꢀ ꢀ0.020)
F
W
20.0
(0.787)
2.00ꢀ ꢀ0.05
(0.079ꢀ ꢀ0.002)
4.00ꢀ ꢀ0.10
(0.157ꢀ ꢀ0.004)
B
A
USER DIRECTION OF FEED
178.0ꢀ ꢀ2.0
(7.008ꢀ ꢀ0.079)
G
60.0ꢀ ꢀ0.5
(2.362ꢀ ꢀ0.020)
Model
Dim.
CHV0603
CHV0805
CHV1206
CHV2010
CHV2512
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
1.10 ± 0.20
1.60 ± 0.20
2.00 ± 0.20
2.80 ± 0.20
3.50 ± 0.20
A
B
(0.043 ± 0.008) (0.063 ± 0.008) (0.079 ± 0.008) (0.110 ± 0.008) (0.138 ± 0.008)
1.90 ± 0.30 2.40 ± 0.30 3.57 ± 0.30 5.50 ± 0.30 6.70 ± 0.30
(0.075 ± 0.012) (0.094 ± 0.012) (0.141 ± 0.012) (0.217 ± 0.012) (0.264 ± 0.012)
8.00 ± 0.05 8.00 ± 0.05 8.00 ± 0.05 12.00 ± 0.05 12.00 ± 0.05
(0.315 ± 0.002) (0.315 ± 0.002) (0.315 ± 0.002) (0.472 ± 0.002) (0.472 ± 0.002)
3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 5.50 ± 0.05 5.50 ± 0.05
(0.138 ± 0.002) (0.138 ± 0.002) (0.138 ± 0.002) (0.217 ± 0.002) (0.217 ± 0.002)
10.0 ± 1.5 10.0 ± 1.5 10.0 ± 1.5 13.8 ± 1.5 13.8 ± 1.5
(0.394 ± 0.059) (0.394 ± 0.059) (0.394 ± 0.059) (0.543 ± 0.059) (0.543 ± 0.059)
W
F
Asia-Pacific:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
G
T
Europe:
Tel: +36 88 885 877
Email: eurocus@bourns.com
14.9
(0.587)
14.9
(0.587)
14.9
(0.587)
16.7
(0.657)
16.7
(0.657)
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
REV.ꢀ03/21
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号：
©2020 ICPDF网 联系我们和版权申明