3590P-6-102L [BOURNS]
Potentiometer, Wire Wound, 2W, 1000ohm, 5% +/-Tol, -50,50ppm/Cel;型号: | 3590P-6-102L |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | Potentiometer, Wire Wound, 2W, 1000ohm, 5% +/-Tol, -50,50ppm/Cel |
文件: | 总2页 (文件大小:297K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
■ Bushing mount
■ Designed for use in HMI applications
■ Optional AR pin feature
■ Plastic or metal shaft and bushings
■ Wirewound
■ Solder lugs or PC pins
■ Sealable (Full body seal)
3590 - Precision Potentiometer
Electrical Characteristics1
Standard Resistance Range...............................................................................................................................................................................200 to 100 K ohms
Total Resistance Tolerance.......................................................................................................................................................................................................±± ꢀ
Independent Linearity..........................................................................................................................................................................................................±0.2± ꢀ
Effective Electrical Angle.......................................................................................................................................................................................3600 ° +10 °, -0 °
Absolute Minimum Resistance............................................................................................................................1 ohm or 0.1 ꢀ maximum (whichever is greater)
Noise ........................................................................................................................................................................................................100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level......................................................................................................................................................................................................1,±00 VAC minimum
Power Rating (Voltage Limited By Power Dissipation or 4±0 VAC, Whichever is Less)
+40 °C ...............................................................................................................................................................................................................................2 watts
+12± °C...............................................................................................................................................................................................................................0 watt
Insulation Resistance (±00 VDC).............................................................................................................................................................1,000 megohms minimum
Resolution ....................................................................................................................................................................................See recommended part numbers
Environmental Characteristics1
Operating Temperature Range ..............................................................................................................................................................................+1 °C to +12± °C
Storage Temperature Range ................................................................................................................................................................................-±± °C to +12± °C
Temperature Coefficient Over Storage Temperature Range2 ....................................................................................................................±±0 ppmꢁ°C maximumꢁunit
Vibration.....................................................................................................................................................................................................................................1± G
Wiper Bounce ......................................................................................................................................................................................0.1 millisecond maximum
Shock.........................................................................................................................................................................................................................................±0 G
Wiper Bounce ......................................................................................................................................................................................0.1 millisecond maximum
Load Life...........................................................................................................................................................................................................1,000 hours, 2 watts
Total Resistance Shift..........................................................................................................................................................................................±2 ꢀ maximum
Rotational Life (No Load).......................................................................................................................................................................1,000,000 shaft revolutions
Total Resistance Shift..........................................................................................................................................................................................±± ꢀ maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift..........................................................................................................................................................................................±2 ꢀ maximum
IP Rating
Sealed Versions (-3, -4, -7, and -8) ......................................................................................................................................................................................IP 6±
Unsealed Versions (-1 -2, -±, and -6) ...................................................................................................................................................................................IP 40
Mechanical Characteristics1
Stop Strength ....................................................................................................................................................................................4± N-cm (64 oz.-in.) minimum
Mechanical Angle..................................................................................................................................................................................................3600 ° +10 °, -0 °
Torque (Starting & Running)........................................................................................................................................0.3± N-cm (0.± oz.-in.) maximum (unsealed)
1.1 N-cm (1.± oz.-in.) maximum (sealed)
Mounting....................................................................................................................................................................................±±-80 N-cm (±-7 lb.-in.) (plastic)
90-113 N-cm (8-10 in.-lb.) (metal)
Shaft Runout .............................................................................................................................................................................................0.13 mm (0.00± in.) T.I.R.
Lateral Runout...........................................................................................................................................................................................0.20 mm (0.008 in.) T.I.R.
Shaft End Play...........................................................................................................................................................................................0.2± mm (0.010 in.) T.I.R.
Shaft Radial Play.......................................................................................................................................................................................0.13 mm (0.00± in.) T.I.R.
Pilot Diameter Runout...............................................................................................................................................................................0.08 mm (0.003 in.) T.I.R.
Backlash....................................................................................................................................................................................................................1.0 ° maximum
Weight................................................................................................................................................................................................................Approximately 19 G
Terminals .......................................................................................................................................................................................................Solder lugs or PC pins
Soldering Condition
Manual Soldering................................................................96.±Snꢁ3.0Agꢁ0.±Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds
Wave Soldering.........................................................................................96.±Snꢁ3.0Agꢁ0.±Cu solder with no-clean flux; 260 °C (±00 °F) max. for ± seconds
Wash processes..............................................................................................................................................................................................Not recommended
Marking..........................................Manufacturer’s name and part number, resistance value and tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Potentiometers).............................................................................................................................................................1 cup maximum
Hardware..................................................................................................................One lockwasher and one mounting nut is shipped with each potentiometer.
NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin.
Recommended Part Numbers
Resistance
Resolution
(Printed Circuit)
(Solder Lug)
(Solder Lug)
(Ω)
(%)
BOLDFACE LISTINGS ARE IN STOCK AND READILY
AVAILABLE THROUGH DISTRIBUTION.
3±90P-2-102L
3±90P-2-202L
3±90P-2-±02L
3±90P-2-103L
3±90P-2-203L
3±90P-2-±03L
3±90P-2-104L
3590S-2-102L
3590S-2-202L
3590S-2-502L
3590S-2-103L
3590S-2-203L
3590S-2-503L
3590S-2-104L
3±90S-1-102L
3±90S-1-202L
3±90S-1-±02L
3±90S-1-103L
3±90S-1-203L
3±90S-1-±03L
3±90S-1-104L
1,000
2,000
5,000
10,000
20,000
50,000
100,000
.029
.023
.025
.020
.019
.013
.009
FOR OTHER OPTIONS CONSULT FACTORY.
RoHS IDENTIFIER:
L = COMPLIANT
BLANK = NON-COMPLIANT
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
3590 - Precision Potentiometer
Product Dimensions
Panel Thickness Dimensions
-1, -3, -5, -7 Configurations
-2, -4, -6, -8 Configurations
2.46 - 3.81
5.08 .38
(.200 .015)
(.097 - .150)
5.08 .38
(.200 .015)
6.99 .38
5.08 .38
6.99 .38
(.200 .015)
(.275 .015)
(.275 .015)
10.31 + .00/- .13
(.406+.000/-.005)
5.08 .38
(.200 .015)
10.31 +.00/-.10
(.406 +.000/-.004)
BUSHING DIAMETER
1
PANEL
3/8-32
UNEF
3
3
1
.76 .25
.030 .010
.81
(SEE PART NUMBERS)
2
R
.81
(.032)
2
HEX NUT
(.032)
SHAFT DIAMETER
.25
(.010)
(SEE PART NUMBERS)
SHAFT DIA. (SEE
PART NUMBERS)
.25
(.010)
1.19
(.047)
BUSHING DIA. (SEE
PART NUMBERS)
7.92
(.312)
.81 .25
(.032 .010)
20.62 .81
(.812 .032)
18.6 .4
(.732 .015)
7.93
(.312)
20.63 .81
18.59 .38
LOCKWASHER
(.812 .032)
(.732 .015)
12.2
(.48)
POT
12.2
(.480)
15.54
(.612)
15.54
(.612)
R MAX.
R MAX.
11.81
(.465)
11.81
(.465)
12.70
(.500)
MOUNTING SURFACE
22.22 .38
(.875 .015)
DIA.
DIA.
10.41 .08
DIA.
12.70 0.25
(.500 .010)
MOUNTING SURFACE
DIA.
22.22 .38
(.875 .015)
(.410 .003)
DIA.
Recommended PCB Layout
7.42
(.292)
Shaft & Bushing Configurations
R
HOLE DIAMETER
FMS
2.08
(Bushing - DxL, Shaft - D):
ADDITIONAL HOLE FOR
ANTIROTATION PIN
(.082)
(-1) Plastic Bushing (3ꢁ8 ” x ±ꢁ16 ”)
and Shaft (.2480 + .001, - .002)
1.60 +.08/-.03
(.063 +.003/-.001)
(-2) Metal Bushing (3/8 ” x 5/16 ”)
and Shaft (.2497 + .0000, - .0009)
DIA.
(-3) Sealed, Plastic Bushing (3ꢁ8 ” x ±ꢁ16 ”)
and Shaft (.2480 + .001, - .002)
5.08 5.08 6.99
(.200) (.200) (.275)
(-4) Sealed, Metal Bushing (3ꢁ8 ” x ±ꢁ16 ”)
and Shaft (.2497 + .0000, - .0009)
(-±) Metric, Plastic Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .076 mm)
Schematic
(-6) Metric, Metal Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .023 mm)
CCW
1
CW
3
(-7) Metric, Sealed, Plastic Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .076 mm)
2
CW
(-8) Metric, Sealed, Metal Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .023 mm)
TOLERANCES: EXCEPT WHERE NOTED
.508
(.02),
.127
(.005)
DECIMALS: .XX
.XXX
FRACTIONS: 1/64
MM
DIMENSIONS:
(IN.)
REV. 08/09
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
相关型号:
©2020 ICPDF网 联系我们和版权申明