HSMA-A431-Y00M1 [BOARDCOM]
Surface Mount LED Indicator;型号: | HSMA-A431-Y00M1 |
厂家: | Broadcom Corporation. |
描述: | Surface Mount LED Indicator 光电 |
文件: | 总13页 (文件大小:889K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
HSMx-A43x-xxxxx
Surface Mount LED Indicator
Description
Features
Industry-standard PLCC-4
High reliability LED package
The Broadcom® Power PLCC-4 SMT LEDs with Lens are high-
performance PLCC-4 package size SMT LEDs targeted mainly
inAutomotive and Electronic Signs and Signals (ESS) markets.
These top-mount single-chip packages with focused radiation
offer high brightness in beam direction and are excellent for
interior automotive, indoor and outdoor sign and industrial
applications. With additional lens in 30° variants, these
products are especially fitting to applications for traffic lights,
CHMSL, and displays.
High brightness using AllnGaP and InGaN dice technologies
High optical efficiency
Narrow viewing angle at 30°
Available in 8-mm carrier tape on 7-inch reel
Compatible with both IR and TTW soldering process
Applications
The PLCC-4 package family is able to dissipate heat better
compared to the PLCC-2 packages. In proportion to this
increase in driving current, this family of LEDs is able to
produce higher light output compared to the conventional
PLCC-2 SMT LEDs.
Interior automotive:
Instrument panel backlighting
Central console backlighting
Cabin backlighting
Navigation and audio system
Dome lighting
As an extension of the standard flat top PLCC-4 SMT LEDs, the
Power PLCC-4 with Lens device is able to provide focused
beams within narrow viewing angles (30°) meeting the market’s
requirements for focused radiation and high brightness in beam
directions.
Push button backlighting
Exterior automotive:
Turn signals
CHMSL
Rear combination lamp
Side repeaters
The Power PLCC-4 SMT LED with 30° is ideal for panel, push
button, or general backlighting in automotive interior and
exterior, sign, office equipment, industrial equipment, and
home appliances applications. This package design, coupled
with careful selection of component materials, allows the
Power PLCC-4 SMT LED with Lens to perform with higher
reliability in a larger temperature range –40 °C to 100 °C. This
high reliability feature is crucial to allow the Power PLCC-4
SMT LED with Lens to perform well in harsh environments,
such as its target Automotive and ESS markets. The Power
PLCC-4 SMT LED with Lens package is also designed to be
compatible with both IR-solder re-flow and through-the-wave
soldering.
Electronic signs and signals:
Interior and exterior full color sign
Variable message sign
Garden lighting
Office automation, home appliances, industrial
equipment:
Front panel backlighting
Push button backlighting
Display backlighting
CAUTION!
This LED is ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to application note AN-
1142 for additional details.
Broadcom
AV02-0208EN
October 26, 2017
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
The Broadcom Power PLCC-4 SMT LED with 30° Lens carries the part number HSMx- A43x-xxxxx. The high brightness
AlInGaP and InGaN dice technologies used provide the product brightness that meets the Automotive and ESS market
requirements. The lens package will complement and complete the existing AlInGap and InGaN color standard Power-
PLCC-4 LED that Broadcom offers, providing customers an extra lens option from one supplier.
To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in
single intensity and color bin (except for red color), to provide close uniformity.
Figure 1: Package Dimensions Source A
2.8 ± ±0.2
3.87 max.
2.2 ± ±0.2
0.1 TYP.
0.80 ± ±0.1
+ve
-ve
3.2 ± ±0.2
3.5 ± ±0.2
0.8 ± ±0.3
-ve
-ve
0.5 ± ±0.1
0.7 ± ±0.1
Package marking
Figure 2: Package Dimensions Source B
2.8 r 0.2
2.2 r 0.2
3.87 max.
0.1
0.80
r
0.1 TYP.
+ve
-ve
3.2r0.2
3.5r0.2
0.8r0.3
-ve
-ve
0.5r0.1
Package marking
0.7r0.1
NOTE:
1. All dimensions are in mm.
2. Electrical connection between all cathodes is recommended.
Broadcom
AV02-0208EN
2
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Device Selection Guide
Test Current
Dice
Technology
Min. IV (mcd)
Typ. IV (mcd)
Max. IV (mcd)
Color
Part Number
(mA)
Red
HSMC-A430-W50M1
HSMC-A431-X90M1
HSMC-A431-Y70M1
HSMC-A431-Y80M1
HSMJ-A430-W50M1
HSMJ-A431-X90M1
HSMJ-A431-X90M1
HSMJ-A431-Y70M1
HSML-A431-X90M1
HSMA-A430-W90M1
HSMA-A431-Y00M1
HSMA-A431-X90M1
HSMA-A431-13NM1
HSMA-A431-Z50M1
HSMA-A431-Z5WM1
HSMM-A430-X90M2
HSMM-A430-Y3YM2
HSMM-A430-Y7YM2
HSMN-A430-V50M2
HSMN-A430-V7YM2
1125
2240
3550
3550
1125
2240
2240
3550
2240
1400
2850
2240
7150
4500
4500
2240
2850
3550
715
2300
4000
—
3550
7150
7150
9000
3550
7150
7150
7150
7150
4500
—
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
30
30
30
30
30
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
InGaN
—
Red Orange
2300
4500
—
—
Orange
Amber
4500
3000
5000
4700
—
7150
14000
14000
14000
7150
5600
7150
2240
1800
—
—
Green
Blue
—
—
InGaN
—
InGaN
—
InGaN
900
—
InGaN
NOTE:
1. The luminous intensity, I , is measured at the mechanical axis of the lamp package. The actual peak of the
V
spatial radiation pattern might not be aligned with this axis.
2. I tolerance is ±12%.
V
Broadcom
AV02-0208EN
3
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Part Numbering System
H
S
M
x1
-
A
x2
x3
x4
-
x5
x6
x7
x8
x9
Code
Description
LED Chip Color
Option
x1
C
J
Red
Red Orange
Orange
Amber
L
A
M
N
4
Green
Blue
x2
Package Type
PLCC-4
x3 x4
x5
Device Specific Configuration
Minimum Intensity Bin Limits
Intensity Bin Select
Refer Intensity Bin Limit
x6
0
2
Full Distribution
2 half bins starting from X51
3 half bins starting from X51
4 half bins starting from X51
5 half bins starting from X51
2 half bins starting from X52
3 half bins starting from X52
4 half bins starting from X52
5 half bins starting from X52
3
4
5
6
7
8
9
x7
Color Bin Select
0
Full Distribution
A and B only
Z
Y
B and C only
W
V
C and D only
D and E only
U
T
E and F only
F and G only
S
G and H only
Q
P
A, B and C only
B, C and D only
C, D and E only
D, E and F only
E, F and G only
F, G and H only
A, B, C and D only
E, F G and H only
N
M
L
K
1
2
x8 x9
Packaging Option
M1
M2
50-mA test current, top mount, 13 inch reel size
30-mA test current, top mount, 13 inch reel size
Broadcom
AV02-0208EN
4
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Intensity Bin Limits
Amber
Min. (nm)
Max. (nm)
A
B
C
D
E
F
582.0
584.5
587.0
589.5
592.0
594.5
584.5
587.0
589.5
592.0
594.5
597.0
Min. IV (mcd)
Max. IV (mcd)
Bin ID
U1
U2
V1
V2
W1
W2
X1
X2
Y1
Y2
Z1
Z2
11
450.00
560.00
560.00
715.00
715.00
900.00
900.00
1125.00
1400.00
1800.00
2240.00
2850.00
3550.00
4500.00
5600.00
7150.00
9000.00
11250.00
14000.00
18000.00
1125.00
1400.00
1800.00
2240.00
2850.00
3550.00
4500.00
5600.00
7150.00
9000.00
11250.00
14000.00
Orange
Min. (nm)
Max. (nm)
A
B
C
D
E
597.0
600.0
603.0
606.0
609.0
600.0
603.0
606.0
609.0
612.0
Red/
Orange
12
Min. (nm)
Max. (nm)
21
A
B
611.0
616.0
616.0
620.0
22
Tolerance of each bin limit = ±12%.
Red
Min. (nm)
Max. (nm)
Full Distribution
Color Bin Limits
Blue
Min. (nm)
Max. (nm)
Forward Voltage Bin Table
A
B
C
D
460.0
465.0
470.0
475.0
465.0
470.0
475.0
480.0
For HSMV-A43x-xxxxx only.
Bin
Min. (V)
Max. (V)
VA
VB
VC
VD
VE
1.9
2.2
2.5
2.8
3.1
2.2
2.5
2.8
3.1
3.4
Cyan
Min. (nm)
Max. (nm)
A
B
C
D
490.0
495.0
500.0
505.0
495.0
500.0
505.0
510.0
Tolerance for each bin limit = ±0.1V.
Green
Min. (nm)
Max. (nm)
A
B
C
D
515.0
520.0
525.0
530.0
520.0
525.0
530.0
535.0
Broadcom
AV02-0208EN
5
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Absolute Maximum Ratings (T = 25°C)
A
Parameters
HSMC/A
70
HSMV
70
HSMK/M/N
Unit
mA
mA
DC Forward Currenta
30
90
Peak Forward Currentb
200
200
Power Dissipation
180
5
240
5
114
4
mW
V
Reverse Voltage
Junction Temperature
110
°C
°C
°C
Operating Temperature
–40 to +100
–40 to +100
Storage Temperature
a. Derate linearly as shown in Figure 7 and Figure 8.
b. Duty factor = 10%, frequency = 1 kHz.
Optical Characteristics (T = 25°C)
A
Dominant
Wavelength,
λDa (nm)
Luminous
Peak
Wavelength,
c
Viewing Angle,
Efficacy, ηV
λPEAK (nm)
2θ b(Degrees)
(lm/W)
½
Color
Part Number
Dice Technology
Typical
Typical
Typical
Typical
Red
HSMC-A43x
HSMJ-A43x
HSMV-A430
HSML-A431
HSMA-A43x
HSMM-A430
HSMN-A43X
HSMK-A43X
AlInGaP
AlInGaP
AlInGaP
AlInGaP
AlInGaP
InGaN
635
621
623
609
592
518
468
500
626
615
617
605
590
525
470
502
30
30
30
30
30
30
30
30
150
240
263
320
480
500
75
Red Orange
Orange
Amber
Green
Blue
InGaN
Cyan
InGaN
285
a. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
b. θ is the off-axis angle where the luminous intensity is ½ the peak intensity.
½
c. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = IV/ηV, where IV is the luminous intensity in candelas and ηV
is the luminous efficacy in lumens/watt.
Electrical Characteristics (T = 25°C)
A
Forward Voltage, VF (Volts) at IF = 50 mA
Part
Reverse Voltage, VR at 100 µA Reverse Voltage, VR at 10 µA
Number
Min.
Typ.
Max.
Min.
Min.
HSMC/J/L/A
HSMV
1.7
1.7
2.2
2.8
2.5
3.4
5
5
—
—
Forward Voltage VF (Volts) at IF = 30 mA
Reverse Voltage VR at 100 µA Reverse Voltage VR at 10 µA
Part
Number
Minimum
Typical
Maximum
Minimum
Minimum
HSMK/M/N
2.7
3.9
4.6
—
5
Broadcom
AV02-0208EN
6
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 3: Relative Intensity vs. Wavelength
1
InGaN
Cyan
0.8
AlInGaP Amber
InGaN
Green
0.6
InGaN
AlInGaP Orange
AlInGaP Red Orange
AlInGaP Red
Blue
0.4
0.2
0
380
430
480
530
580
630
680
730
780
WAVELENGTH - nm
Figure 4: Forward Current vs. Forward Voltage
80
70
HSMV
HSMC/J/L/A
60
50
40
30
20
10
0
HSMK/M/N
4
0
1
2
3
5
FORWARD VOLTAGE - V
Figure 5: Relative Intensity vs. Forward Current (AlInGaP)
Figure 6: Relative Intensity vs. Forward Current (InGaN)
1.2
1.0
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0
5
10
15
20
25
30
35
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75
DC FORWARD CURRENT - mA
DC FORWARD CURRENT - mA
Broadcom
AV02-0208EN
7
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 7: Maximum Forward Current vs. Ambient
Figure 8: Maximum Forward Current vs. Ambient
Temperature. Derated Based on TJmax = 110 °C (AlInGaP)
Temperature. Derated Based on TJmax = 110 °C (InGaN)
80
70
60
35
30
300C/W
25
300C/W
350C/W
50
350C/W
20
40
470C/W
15
470C/W
30
10
5
20
10
0
0
0
20
40
60
80
100
120
0
20
40
60
80
100
120
AMBIENT TEMPERATURE – C
AMBIENT TEMPERATURE – C
Figure 9: Radiation Pattern
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-90
-60
-30
0
30
60
90
ANGULAR DISPLACEMENT - DEGREES
Broadcom
AV02-0208EN
8
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 10: Recommended Soldering Pad Pattern (IR Reflow)
X
X
2.60
(0.103)
0.40 (0.016)
1.10
(0.043)
Y
Y
0.50
(0.020)
4.50 (0.178)
1.50 (0.059)
REPRESENTS ELECTRICAL
CONNECTIVITY BETWEEN PADS
DIMENSIONS IN mm (INCHES).
SOLDER RESIST
Figure 11: Recommended Soldering Pad Pattern (TTW)
X
X
0.5 (0.020)
6.1 (0.240)
2.8 (0.110)
Y
2.0 (0.079)
6.0 (0.236)
1.0 (0.039)
Y
2.0 (0.079)
3.0 (0.118)
DIMENSIONS IN mm (INCHES).
REPRESENTS ELECTRICAL
CONNECTIVITY BETWEEN PADS
SOLDER RESIST
Broadcom
AV02-0208EN
9
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 12: Soft Tip Vacuum Pick-Up Tool for Extracting SMD
LED Components from Carrier Tape
Figure 13: Recommended Pb-Free Reflow Soldering Profile
Vacuum Pick-up Tool
10 to 20 SEC.
255 °C +5°C
-0°C
217°C
-6°C/SEC MAX.
3°C/SEC MAX.
125°C +/- 25°C
Nozzle Inner Diameter
size: 1.0 to 1.5 mm
Soft Tip
60-150 SEC.
MAX. 120 SEC.
1.25mm
Radius Contour
TIME
Figure 14: Recommended Wave Soldering Profile
LAMINAR WAVE
HOT AIR KNIFE
TURBULENT WAVE
BOTTOM SIDE
OF PC BOARD
250
200
150
100
TOP SIDE OF
PC BOARD
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
PREHEAT SETTING = 150 C (100 C PCB)
SOLDER WAVE TEMPERATURE = 245 C
AIR KNIFE AIR TEMPERATURE = 390 C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40
FLUXING
SOLDER: SN63; FLUX: RMA
NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY
COOLED BEFORE EXERTING MECHANICAL FORCE.
50
30
PREHEAT
20 30
0
10
40
50
60
70
80
90
100
TIME – SECONDS
Broadcom
AV02-0208EN
10
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 15: Tape Leader and Trailer Dimensions
TRAILER
COMPONENT
LEADER
200 mm MIN. FOR O 180 REEL.
200 mm MIN. FOR O 330 REEL.
480 mm MIN. FOR O180 REEL.
960 mm MIN. FOR O 330 REEL.
C
A
USER FEED DIRECTION
Figure 16: Tape Dimensions
8.00 0.10
2.00 0.05
4.00 0.10
O 1.50 0.10
1.75 0.10
5.50 0.05
12.00 + 0.30
- 0.10
.388 0.02
32° MAX
8° MAX
32° MAX
8° MAX
1.24
3.52 0.10
3.00 0.10
3.70 0.10
Broadcom
AV02-0208EN
11
HSMx-A43x-xxxxx Data Sheet
Surface Mount LED Indicator
Figure 17: Reeling Orientation
Control of assembled boards:
If the PCB soldered with the LEDs is to be subjected to
other high-temperature processes, store the PCB in a
sealed MBB with desiccant or desiccator at <5% RH to
ensure that all LEDs have not exceeded their floor life of
672 hours.
USER FEED DIRECTION
Baking is required if:
– The HIC indicator indicates a change in color for
10% and 5%, as stated on the HIC.
CATHODE SIDE
– The LEDs are exposed to conditions of >30°C/60%
RH at any time.
– The LED's floor life exceeded 672 hours.
The recommended baking condition is 60°C ± 5ºC for
20 hours.
PRINTED LABEL
Baking can only be done once.
Handling of Moisture-Sensitive
Devices
This product is qualified as Moisture Sensitive Level 2a per
JEDEC J-STD-020. The following precautions for handling
this moisture-sensitive product will help to ensure the
reliability of the product. Refer to Broadcom Application
Note AN5305, Handling of Moisture Sensitive Surface
Mount Devices, for details.
Before use:
– An unopened moisture barrier bag (MBB) can be
stored at <40°C/90% RH for 12 months. If the actual
shelf life has exceeded 12 months and the humidity
indicator card (HIC) indicates that baking is not
required, it is safe to reflow the LEDs per the original
MSL rating.
– Do not open the MBB prior to assembly (for
example, for IQC).
Control after opening the MBB:
– Read the HIC immediately upon opening of MBB.
– Keep the LEDs at <30°C/60% RH at all times, and
complete all high temperature-related processes,
i
ncluding soldering, curing, or rework within 672 hours.
Control for unfinished reel:
Store unused LEDs in a sealed MBB with desiccant or a
desiccator at <5% RH.
Broadcom
AV02-0208EN
12
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks
of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU.
Copyright © 2017 by Broadcom. All Rights Reserved.
The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit
www.broadcom.com.
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability,
function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does
not assume any liability arising out of the application or use of this information, nor the application or use of any product or
circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
相关型号:
©2020 ICPDF网 联系我们和版权申明