BCM6410_04 [BOARDCOM]
LOW-POWER, HIGH-DENSITY CENTRAL OFFICE ADSL SOLUTION; 低功耗，高密度局端的ADSL解决方案
| 型号： | BCM6410_04 |
| 厂家： | 
Broadcom Corporation. |
| 描述： | LOW-POWER, HIGH-DENSITY CENTRAL OFFICE ADSL SOLUTION |
| 文件： | 总2页 (文件大小：134K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BCM6410/6420
®
LOW-POWER, HIGH-DENSITY CENTRAL OFFICE ADSL SOLUTION
S U M M A R Y O F B E N E F I T S
F E A T U R E S
Low-power, high-density Central Office ADSL solution
Superior rate-reach performance
Proven worldwide interoperability
•
•
•
•
•
Lowest power per channel: less than 1W per channel (worst-
case line conditions), including the line driver
System-wide power cut-back techniques deliver in-service
power savings and patented power reduction technologies
deliver unmatchable low-power consumption using standard
class AB line drivers
Highest density two-chip solution implements 12 channels of
full-rate ADSL
•
•
•
Smallest modem footprint: production ready design is just 650
mm2 per channel, using only eight PCB layers
Complete G.997.1 on chip support enabling remote booting
and management (processor-less line cards)
•
Complete standards support: ANSI T1.413 issue2, ITU G.992.1
(G.dmt) Annex A, B, C & H, ITU G.992.2 (G.lite), ITU G.992.3
(ADSL2) Annex A, B, M (extended upstream), L (RE-ADSL),
ITU G.992.5 (ADSL2+) Annex A, B, and M
Shared clocks and power supplies reduce line card cost
•
•
No external devices, such as memory or local processor, are
required
Fully soft modem implementation supports unprecedented
feature richness
•
•
Designed to operate with a wide range of line driver devices
Full design-in support provided
•
•
Loop condition testing and capacity estimation on in-service
lines
BladeRunner™ Central Office ADSL System
UTOPIA 2
CTRL
SYNC
AFE Line
Interface
BCM6410
12-Channel DSL
Digital Transceiver
IC
BCM6420
12-Channel
xDSL Integrated
AFE IC
TX
SPROM
12 off
(optional)
RX
CLK
AFE Line
Interface
External
Controller
(optional)
35.328 MHz
Clock
O V E R V I E W
The BCM6410 and BCM6420 devices are the first of Broadcom's new
Reference Line Card Designs
BladeRunner™ generation of low-power DSL chipsets designed for very
high-density and functionally rich DSLAM and DLC systems.
Broadcom has designed a number of working line cards with generic
system connectivity to suit different form factors and channel counts.
These serve as references for customer designs, demonstrate the high
channel density capability of the Broadcom solution, verify CPE
interoperability, and showcase the viability of low-cost volume
production. These boards are readily manufactured in high volume at
low cost. Broadcom can provide line card design expertise as an integral
part of the design support activity.
Powered by Broadcom's ultra-high performance FirePath™
communications processor, optimized for xDSL algorithms, the
BCM6410's fully programmable digital design serves as a platform for a
low-power and high-density digital transceiver IC.
The BCM6410 standard compliant firmware includes power
optimization features such as the Power Crest™ that reduces line drivers
power consumption.
Evaluation Systems
Broadcom has produced several evaluation systems that use the
reference line card designs to quickly prototype working multi-channel
ADSL modems. This allows customers to evaluate the benefits of using
Broadcom's BladeRunner ADSL chipset, and provides a development
platform for system/product prototyping.
The BCM6410 12-channel DSL digital transceiver IC is supplied in a
27mm x 27mm Plastic BGA (336-ball) package. The BCM6420 12-
channel xDSL AFE IC is supplied in a 23mm x 23mm Plastic BGA (208-
ball) package.
The firmware for the BCM6410/BCM6420 chipset supports ANSI
T1.413 issue 2, ITU G.992.1 Annexes A, B, C, and I, ITU G.992.2
(G.lite), ITU G.992.3 (ADSL2) Annex A, B, M, and L, ITU G.992.5
(ADSL2+) and Annex A, B, and M giving complete support for full- and
double-rate ADSL, extended upstream ADSL2, Reach Extended RE-
ADSL, and up to 29-Mbps ADSL2+.
Software Development Environment
Broadcom has created a sophisticated software development
environment with which to design, build and verify the software base for
its FirePath processor core and its ADSL applications. This environment
includes a comprehensive commercially available tool chain of
processor simulators, assemblers, optimizing compilers, and debugging
tools. The software environment includes a robust real-time operating
system and flexible software architecture. Using the tool chain,
additional functionality can be added to the chipset's firmware tailored to
a customer's specific requirements by Broadcom or by the customer-all
the necessary support is provided.
Future firmware upgrades will track future standards evolution, extend
interoperability, and provide higher-layer network functions. Upgrades
are supplied to customers as required for all firmware variants, using the
same hardware design for all Annexes.
CPE InterOperability
The BladeRunner solution has proven interoperability with a broad range
of ADSL CPEs and supports extended rate-reach performance, as well as
dual latency and fractional S operations.
Technology White Papers
Broadcom has created a comprehensive base of innovative technology
during development of its ADSL products, on which white papers are
available. This technology relates to new design processes, the FirePath
processor architecture, low-power hardware designs, system-wide
power management techniques, optimized software algorithms, and
unique ADSL traffic-carrying techniques.
Host Messaging Interface Definition
The functionality of the BladeRunner chipset is accessed via a flexible
messaging interface. This interface is supported on the local processor
port connection and over the in-band management link. A detailed and
comprehensive definition of this interface is available to customers and
full design-in assistance is provided, including example host codes and
graphical user interfaces (GUIs).
Ordering Information
BCM6410IPB 12-Channel ADSL Digital Transceiver
BCM6420IPB 12-Channel xDSL Integrated AFE
Broadcom®, the pulse logo, BladeRunner™, FirePath™and Connecting everything® are trademarks of
Broadcom Corporation and/or its subsidiaries in the United States and certain other countries. All other
trademarks mentioned are the property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: info@broadcom.com
Web: www.broadcom.com
© 2004 by BROADCOM CORPORATION. All rights reserved.
6410-6420-PB03-R 06/03/04
相关型号：
©2020 ICPDF网 联系我们和版权申明