BCM5228 [BOARDCOM]
10/100BASE-TX DUAL-PORT DIGI-PHY TRANSCEIVER; 10 / 100BASE -TX双端口DIGI - PHY收发器型号: | BCM5228 |
厂家: | Broadcom Corporation. |
描述: | 10/100BASE-TX DUAL-PORT DIGI-PHY TRANSCEIVER |
文件: | 总2页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BCM5222
®
10/100BASE-TX DUAL-PORT DIGI-PHY™ TRANSCEIVER
S U M M A R Y O F B E N E F I T S
F E A T U R E S
Dual-port 10/100BASE-TX IEEE 802.3u Fast Ethernet
transceiver
Low power and intelligent power management
•
•
•
•
•
•
Increase active working time
Prolonge battery life in active standby
Increase reliability
Power consumption: <195 mW per port
•
•
Unique energy detection circuit to enable intelligent power
management
Improved ease of use and installation, reduced support cost
•
•
•
Straight-through or cross-over cables accommodate
HP auto-MDIX
•
•
•
•
•
•
•
•
•
•
•
independent of installation
Robust CESD tolerance
Resistance to CESD prevent product destruction and product
returns
Advanced cable diagnostic features enable remote monitoring
and debugging of cabling infrastructure
Cable length indication
Cable noise level indication
DSP-based Digi-PHY™ architecture ensures performance
over temperature, voltage, and process variation
•
Cable length greater than 140 meters
Well under 10 PPM defect ratio quality
Industrial temperature range (-40 to 85C°)
MII/7-wire serial interface
•
Proven in over 450,000,000 Fast Ethernet ports
Provides ease of manufacturing with JTAG support
•
•
Enables simplified system and board design with MAC
interface and packaging options
IEEE 1149.1 (JTAG) scan chain support
MII management via serial port
100-pin PQFP and 100-pin fpBGA package
Backplane Bus Communication 10/100BASE-TX Application
Main Control Board
Peripheral Board #1
BCM5228
Peripheral Board #2
BCM5222
BCM5222
Control
Data
O V E R V I E W
TXD[1:2]
TXEN[1:2]
TXER[1:2]
TXC[1:2]
4
Multimode
Xmt DAC
+
TD [1:2]
10BASE-X
PCS
Auto
MDIX
Baseline
Wander
Correction
COL[1:2]
RXC[1:2]
CRS[1:2]
RXDV[1:2]
RXER[1:2]
RXD[1:2]
100BASE-X
PCS
Digital
Adaptive
Equalizer
+
ADC
RD [1:2]
4
ACTLED#[1:2]
LNKLED#[1:2]
SPDLED#[1:2]
FDXLED#[1:2]
Auto-Negotiation
/Link Integrity
CRS/Link
LED
Detection
Drivers
Clock
Recovery
Clock
Generator
XTALO
XTALI
MODES
Bias
RDAC
JTAG
Generator
MII
Mgmt
Control
MII
Registers
MDC
MDIO
JTAG
Test Logic
5
Lowest-Power Fast Ethernet PHY
switches its transmit and receive circuitry to accommodate the link
partner’s polarity.
With a power dissipation of less than 195 mW per port, the BCM5222 is
the industry’s lowest-power Fast Ethernet PHY. In addition, the
BCM5222 has several intelligent power-down states that conserve
power, yet allow products based on it to automatically turn on when
needed.
Cable-sourced electrostatic discharge (CESD) is a recently discovered
phenomenon that occurs when an electrically charged network cable is
plugged into a networked product, an issue becoming more prevalent
with recent cable installations. The BCM5222 has been designed and
tested to withstand over 9 KV of CESD, which unlike other transceivers,
prevents the device from being destroyed in a CESD event.
The BCM5222 includes a unique Intelligent Power-Management feature
that powers down the device if energy is not detected on the cable. The
energy detect feature is especially useful for portable and power-
sensitive applications, as the BCM5222 draws virtually no energy if the
cable is not plugged in and the client is not connected to the network.
This results in noticeably extended battery life for portable applications,
and increases product reliability due to decreased power dissipation. For
lowest power consumption, the BCM5222 can be put in a power-off state
(<2.0 mW).
DSP-Based PHY Technology
The BCM5222 builds on Broadcom’s proven DSP PHY design and full
custom circuit design techniques to create a highly integrated and robust
physical layer solution. DSP techniques allow the BCM5222 to achieve
high interoperability and to exhibit robust performance across
temperature (-40 to 85C°), voltage, and process variations. Broadcom’s
DSP-based, Digi-PHY™ technology has been proven in the shipment of
over 450,000,000 Fast Ethernet ports. Broadcom’s superior quality has
resulted in a failure rate well under 10 PPM.
Network Tolerance
The BCM5222 includes features that simplify the installation and
maintenance of local area networks. One such feature is the HP Auto-
MDIX capability, which automatically detects and corrects crossed
cables. With HP Auto-MDIX, the installer does not need to know what
is on the other side of the network cable: the BCM5222 automatically
Applications
•
•
•
•
IP Phones
Backplane Bus Communication
Embedded Telecom
Print Servers
Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/
or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the
property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: info@broadcom.com
Web: www.broadcom.com
© 2004 by BROADCOM CORPORATION. All rights reserved.
5222-PB05-R
07/01/04
相关型号:
©2020 ICPDF网 联系我们和版权申明