BT331_1 [BEREX]
700-2700 MHz 1.5~2.0W Power Amplifier; 700-2700兆赫1.5 〜 2.0W功率放大器型号: | BT331_1 |
厂家: | BEREX CORPORATION |
描述: | 700-2700 MHz 1.5~2.0W Power Amplifier |
文件: | 总20页 (文件大小:3196K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Device Features
OIP3 = 51.0 dBm @ 1900 MHz
Gain = 19.5 dB @ 900 MHz
Output P1 dB = 33.3 dBm @ 1900 MHz
50 Ω Cascadable
Highly Reliable InGaP/GaAs HBT Technology
Lead-free/RoHS-compliant SOIC-8 SMT package
YY = Year, WW = Work week,
XX = Wafer Number
Product Description
Typical Performance1
BeRex’s BT331 is a high power and a high
dynamic range amplifier in a low cost sur-
face mount package(SOIC-8) with a RoHS-
compliant, that incorporates reliable het-
erojunction-bipolar-transistor (HBT) de-
vices fabricated with InGaP GaAs technol-
ogy.
Parameter
Frequency
Unit
900
19.5
-16.0
-11.0
50.0
31.5
23.3
-
1900
14.0
-14.0
-11.0
51.0
33.3
-
2140
13.0
-15.0
-12.0
51.0
32.3
-
2450
12.0
-20.0
-10.0
50.0
31.0
-
2600
12.1
-19.0
-12.7
47.0
31.2
-
MHz
dB
Gain
S11
dB
S22
OIP32
dB
dBm
dBm
dBm
dBm
dB
This device is designed for use where high
P1dB
linearity is required and features high OIP3
and Power with low consumption current
(400mA) and requires a few external
matching components such as a DC block-
ing capacitors on the In/Output pin, a by-
pass capacitor and a RF choke for the out
port.
IS-95C ACPR
WCDMA ACLR
23.3
5.0
23.4
5.0
21.5
5.3
21.5
5.4
Noise Figure
4.8
1
Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.
2
OIP3 _ measured with two tones at an output of 20 dBm per tone separated by 1 MHz.
*ACPR CH Power is measured at 55dBc, ACLR CH Power _ measured at 50dBc.
*ACPR Test set-up: IS-95 CDMA, 9Ch. FWD, +885KHz offset, PAR 9.7dB at 0.01% Prob.
*ACLR Test set-up: 3GPP WCDMA, TM1+64DPCH, +5MHz offset, PAR 10.34 at 0.01% Prob.
Applications
Min.
Typical
Max.
Unit
Base station Infrastructure/RFID
Bandwidth
IC @ (Vc = 5V)
VC
RTH
700
360
2700
440
MHz
mA
V
Commercial/Industrial/Military wireless system
410
5.0
10.0
Application Circuits
°C/W
Vcc
Absolute Maximum Ratings
Bypass
RF Choke
Parameter
Rating
Unit
°C
°C
Operating Case Temperature
Storage Temperature
Junction Temperature
-40 to +85
-55 to +155
+220
BT331
RF In
RF Out
DC
DC
Block
Block
°C
Operating Voltage
Supply Current
Input RF Power
+5.5
900
28
V
mA
dBm
*external matching circuit: refer to the page 4 to 16.
*Operation of this device above any of these parameters may result in permanent damage.
1
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
V-I Characteristics
BeRex SOT89 Evaluation Board
*Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB
Typical Device Data
S-parameters (Vc=5V, Ic=400mA, T=25°C)
2
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 1.5~2.0W Power Amplifier
S-Parameter
(Vdevice = 5.0V, Icc = 400mA, T = 25 °C, calibrated to device leads)
Freq
S11
S11
S21
S21
S12
S12
S22
S22
[Mag]
[Ang]
[Mag]
[Ang]
[Mag]
[Ang]
[Mag]
[Ang]
[MHz]
100
500
0.919
0.949
0.941
0.929
0.895
0.847
0.735
0.757
-155.332
168.743
156.029
143.815
131.767
120.721
118.042
125.918
27.202
4.153
2.065
1.444
1.226
1.393
2.132
2.326
171.888
90.122
78.875
71.101
65.133
57.189
32.334
-38.115
0.011
0.010
0.011
0.016
0.019
0.024
0.024
0.007
81.778
35.600
47.384
48.347
50.235
47.782
2.709
0.335
0.805
0.833
0.840
0.838
0.839
0.848
0.904
151.426
-179.714
170.693
163.704
158.159
153.001
147.516
140.189
1000
1500
2000
2500
3000
3500
-11.874
4000
0.910
122.065
0.796
-127.288
0.014
66.759
0.495
79.167
3
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 900 MHz
Toler-
ance
Schematic Diagram
BOM
C1
C2
C3
C4
C5
C6
C7
C8
C9
1680 100pF ±5%
1608 100pF ±5%
1608 100pF ±5%
1608
1608
3216
1nF
1uF
10uF ±20%
±5%
±5%
C7
R1
Vcc
C6
C9
R2
C3 C4 C5
NC
NC
C8
L1
1
2
3
4
8
7
6
5
1608
1pF
3.3pF
10pF
8pF
18nH
8.2nH ±5%
±5%
±5%
±5%
±5%
±5%
C10 1608
C11 1608
C12 1608
L1
L2
R1
R2
C10
C11
C1
RF_OUT
RF_IN
C2
C12
L2
1608
1608
1608 4.3KΩ ±5%
1608 100Ω ±5%
PCB Diagram
Notice
1. PCB: 31mil thick FR4
2. Distance between the center of
the shunt Inductor(L2) and the
input pin of BT331 _ 6.45 mm.
3. Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
4. Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
5. Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 8.25 mm.
※ BT331 with both input and output ports
opened simultaneously may cause instabil-
ity. Please See an application note or con-
tact company for application support.
4
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
5
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
6
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 1900 MHz
Toler-
ance
Schematic Diagram
BOM
C1
C2
C3
C4
C5
C6
C7
C8
C9
1608 100pF ±5%
1608 100pF ±5%
1608 100pF ±5%
1608
1608
3216
1nF
1uF
10uF ±20%
NC
±5%
±5%
C7
R1
Vcc
C6
C9
R2
C3 C4 C5
1608
1608
2pF
10pF
3pF
0.5pF
2.7pF
2.5pF
56nH
±5%
±5%
±5%
±5%
±5%
±5%
±5%
C8
L1
1
2
3
4
8
7
6
5
C10 1608
C11 1608
C12 1608
C13 1608
L1
R1
R2
C10
C11
C1
RF_OUT
RF_IN
C2
C12
C13
1608
1608 4.3KΩ ±5%
1608 100Ω ±5%
PCB Diagram
Notice
1. PCB: 31mil thick FR4
2. Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 5.25 mm.
3. Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
4. Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
5. Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 2.25 mm.
7
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
8
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
9
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 2140 MHz
Toler-
ance
Schematic Diagram
BOM
C1
C2
C3
C4
C5
C6
C7
C8
C9
1608 100pF ±5%
1608 100pF ±5%
1608 100pF ±5%
1608
1608
3216
1nF
1uF
10uF ±20%
NC
±5%
±5%
C7
R1
Vcc
C6
C9
R2
C3 C4 C5
1608
5pF
NC
±5%
C8
L1
1
2
3
4
8
7
6
5
C10 1608
C11 1608
C12 1608
C13 1608
L1
R1
R2
1.8pF
0.5pF
2pF
2pF
22nH
±5%
±5%
±5%
±5%
±5%
C10
C11
C1
RF_OUT
RF_IN
C2
C12
C13
1608
1608 5.6KΩ ±5%
1608 100Ω ±5%
PCB Diagram
Notice
1. PCB: 31mil thick FR4
2. Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 5.25 mm.
3. Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
4. Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
5. Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 2.25 mm.
10
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
11
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
12
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 2450 MHz
Toler-
ance
Schematic Diagram
BOM
C1
C2
C3
C4
C5
C6
C7
C8
C9
1608 100pF ±5%
1608 100pF ±5%
1608 100pF ±5%
1608
1608
3216
1nF
1uF
10uF ±20%
±5%
±5%
C7
R1
Vcc
C6
C9
R2
C3 C4 C5
NC
NC
NC
C8
L1
1
2
3
4
8
7
6
5
C10 1608
C11 1608
C12 1608
C13 1608
1pF
0.5pF
1.8pF
1pF
±5%
±5%
±5%
±5%
C10
C11
C1
RF_OUT
RF_IN
C2
C12
C13
L1
R1
R2
1608
1608 5.6KΩ ±5%
1608 100Ω ±5%
5.7nH ±5%
PCB Diagram
Notice
1. PCB: 31mil thick FR4
2. Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 6.0 mm.
3. Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
4. Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
5. Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 2.5 mm.
13
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
14
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
15
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Application Circuit: 2600 MHz
Toler-
ance
Schematic Diagram
BOM
C1
C2
C3
C4
C5
C6
C7
C8
C9
1608 100pF ±5%
1608 100pF ±5%
1608 100pF ±5%
1608
1608
3216
1nF
1uF
10uF ±20%
NC
±5%
±5%
C7
R1
Vcc
C6
C9
R2
C3 C4 C5
1608
1608
5pF
2.5pF
1pF
0.5pF
1.8pF
1pF
±5%
±5%
±5%
±5%
±5%
±5%
C8
L1
1
2
3
4
8
7
6
5
C10 1608
C11 1608
C12 1608
C13 1608
C10
C11
C1
RF_OUT
RF_IN
C2
C12
C13
L1
R1
R2
1608
1608 5.6KΩ ±5%
1608 100Ω ±5%
5.7nH ±5%
PCB Diagram
Notice
1. PCB: 31mil thick FR4
2. Distance between the center of
the shunt cap.(C13) and the
input pin of BT331 _ 5.25 mm.
3. Distance between the center of
the series cap.(C10) and the
input pin of BT331 _ 2.8mm.
4. Distance between the center of
the shunt cap.(C11) and the
input pin of BT331 _ 1.5 mm.
5. Distance between the center of
the shunt cap.(C12) and the
output pin of BT331 _ 1.5 mm.
16
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
17
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Typical Performance
18
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Package Outline Dimension
19
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
BT331
700-2700 MHz 1.5~2.0W Power Amplifier
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
PCB Mounting
Note : All dimension are in millimeters
PCB lay out _ on BeRex website
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate
thin whisker growth concerns.)
MSL / ESD Rating
ESD Rating:
Value:
Class 2
Passes <4000V
Test:
Human Body Model (HBM)
JEDEC Standard JESD22-A114B
Standard:
MSL Rating:
Standard:
Level 3 at +265°C convection reflow
JEDEC Standard J-STD-020
NATO CAGE code:
2
N
9
6
F
20
BeRex
● website: www.berex.com
● email: sales@berex.com
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. C
相关型号:
©2020 ICPDF网 联系我们和版权申明