SRDC-16D18S [BEL]
NON-ISOLATED DC/DC CONVERTERS 3 - 15V Input / 1.8V Output / 16A; 非隔离式DC / DC转换器3 - 15V输入/输出1.8V / 16A
| 型号： | SRDC-16D18S |
| 厂家： | 
BEL FUSE INC. |
| 描述： | NON-ISOLATED DC/DC CONVERTERS 3 - 15V Input / 1.8V Output / 16A |
| 文件： | 总11页 (文件大小：199K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NON-ISOLATED DC/DC CONVERTERS
3 – 15V Input / 1.8V Output / 16A
POWER PRODUCTS
BP06SRDC-16D180
SRDC-16D180 Module
RoHS Compliant
•
•
•
•
•
•
•
•
•
•
•
Nonisolated
Industry standard pinout
Fixed frequency
High efficiency means less power dissipation
High power density
Optimized for cost
Remote on/off
Programmable undervoltage lockout (UVLO)
Over current and short circuit protection
Two phase operation
Non-latching over temperature shutdown protection
Description
The Bel SRDC-16D180 module is one in a series of non-isolated, DC/DC power converters that operate from a wide input
range of 3V minimum to 15V maximum. This converter is available with 1.8V output. It uses a low profile, surface mount DIP
package for ease of layout and space savings. 16A maximum output is also provided. Standard features include remote
on/off, over current and short circuit protection, programmable UVLO and output voltage adjust. Optional features include
two-wire remote sense or single-ended remote sense with a good power signal. This module also makes use of adaptive
positioning to improve transient response performance. It may be used almost anywhere low voltage silicon is employed
and a 3 to 15V source is available. Typical applications include file servers, routers, line cards and other computing and
communications equipment.
Applications
Options
•
•
•
Telecommunications
Networking
•
•
Double-ended remote sense
Power good signal and single-ended sense
Computers and peripherals
Part Number Selection
Max.
Output
Power
Part Number
Power Good Signal
& Remote Sense
Part Number
Double-ended
Remote Sense
Output
Voltage
Input
Voltage
Max. Output
Current
Typical
Efficiency
Part Number
1.8V
3 - 15V
16A
29W
86%
SRDC-16D180
SRDC-16D18S
SRDC-16D18D
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 1
NON-ISOLATED DC/DC CONVERTERS
POWER PRODUCTS
3 – 15V Input / 1.8V Output / 16A
BP06SRDC-16D180
Absolute Maximum Ratings
Parameter
Symbol
Min
-0.3
-0.3
0
Typical
Max
15
Unit
V
Continuous Input Voltage
Output Enable Terminal Voltage1
Ambient Temperature
Storage Temperature
Vin
Vouten
Tamb
Tstor
6
V
70
°C
°C
-40
105
Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC
converter or may permanently damage the device.
1. The enable pin performs two functions, remote on/off and programmable under voltage
lockout. The factory set UVLO point is 3.0V typical, but can be adjusted upward with the
addition of a single external resistor located from the enable pin to ground. Turning the
converter on and off is accomplished using an open collector/drain device as a switch.
The enable pin is internally pulled up to Vin through a 12.1K resistor and the pin’s logic
is active high.
Input Specifications
Parameter
Symbol
Vin
Min
Typical
Max
15
Units
Operating Input Voltage
Input Current (Vin=3.3V)
Input Current (Vin=5.0V)
3.1
V
A
A
Iin
10.8
7
Iin
Input Current (Vin=12.0V)
Iin
Iin
Iin
3.2
200
150
A
No Load Input Current (Vin=3.3V)
No Load Input Current (Vin=5.0V)
mA
mA
No Load Input Current (Vin=12.0V)
Iin
110
mA
Input Reflected Ripple Current1
Input Reflected Ripple Current (P-P)1
I2t Inrush Current Transient
50
100
0.1
mArms
mApk
A2s
V
Turn On Voltage Threshold2
Turn Off Voltage Threshold
2.92
2.85
2.8
2.90
V
Note: Input capacitance 100µF/16V, ESR = 0.03 Ω max at 100kHz @ 25° C.
1. With simulated source impedance of 500nH, 5Hz to 20MHz.
2. UVLO is adjustable by terminating on/off pin to ground per the termination resistance table
on page 7.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 2
NON-ISOLATED DC/DC CONVERTERS
3 – 15V Input / 1.8V Output / 16A
POWER PRODUCTS
BP06SRDC-16D180
Output Specifications
Parameter
Symbol
Vout
Min
1.80
2
Typical
1.82
Max
1.85
3
Units
V
Output Voltage Set Point
Load Regulation (Droop Impedance)
Rout
2.5
mΩ
mV
Line Regulation
Input Voltage 3.1V to 15V
15
3
25
10
Line Regulation
Input Voltage 5V ±20%
mV
mV
Regulation Over Temperature
0° - 70° C
10
25
10
25
40
20
16
22
Output Ripple and Noise1
Output Ripple and Noise1
Output Current Range
Output DC Current Limit
mVp-p
mVrms
A
Iout
Ioutlim
Ton
0
18
A
Turn on Time
ms
Vin to Vout or on/off to Vout
8
0
10
1
Overshoot at Turn On
Output Capacitance
%
Cout
100
2200
µF
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated.
1. 0 - 20MHz BW, 0.1µF ceramic cap on output.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 3
NON-ISOLATED DC/DC CONVERTERS
POWER PRODUCTS
3 – 15V Input / 1.8V Output / 16A
BP06SRDC-16D180
Output Specifications
Parameter
Symbol
Min
Typical
Max
Units
Transient Response 2 (Vin=3.3V)
∆V 50% to 100% of Max Load
Settling Time
60
100
60
75
120
75
mV
µs
Ts
Ts
mV
µs
∆V 100% to 50% of Max Load
Settling Time
100
120
Transient Response 2 (Vin=5.0V)
∆V 50% to 100% of Max Load
Settling Time
100
100
120
120
mV
µs
Ts
Ts
100
100
120
120
mV
µs
∆V 100% to 50% of Max Load
Settling Time
Transient Response 2 (Vin=12.0V)
∆V 50% to 100% of Max Load
Settling Time
135
100
135
100
150
120
150
120
mV
µs
Ts
Ts
mV
µs
∆V 100% to 50% of Max Load
Settling Time
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated.
2. di/dt = 1A/1µS, Ta = 25° C with a 560µF oscon cap on output.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 4
NON-ISOLATED DC/DC CONVERTERS
3 – 15V Input / 1.8V Output / 16A
POWER PRODUCTS
BP06SRDC-16D180
General Specifications
Parameter
Symbol
Min
Typical
Max
Units
Efficiency1 (Vin=3.3V)
Efficiency2 (Vin=5.0V)
Efficiency3 (Vin=12.0V)
85
83
80
86
84
81
%
%
%
η
η
η
Switching Frequency
Fsw
495
90
550
605
110
kHz
%
Output Voltage Trim Range4
Remote Sense Compensation
(when option specified)
mV
300
Weight
16
g
1. Vin=3.3V, full load and Ta=25° C.
2. Vin=5.0V, full load and Ta=25° C.
3. Vin=12.0V, full load and Ta=25° C.
4. See graph on page 7.
Control Specifications
Parameter
Symbol
Min
Typical
Max
Units
Remote On/Off
Open Circuit Voltage (Vin=3.3V)
Vouten
1.4
2.1
5.1
V
V
Remote On/Off
Open Circuit Voltage (Vin=5.0V)
Vouten
Vouten
Remote On/Off
Open Circuit Voltage (Vin=12.0V)
V
Remote On/Off
Renable
kΩ
Impedance Limitation
(pin pulled up to +Vin)
11.5
0.3
Signal Low (Unit Off)
Signal High (Unit On)
-0.3
1.5
V
V
5.5
Power Good Levels
(when option specified)
Vpg
Signal Low
0.18
0.4
4
V
Current Sink
mA
V
Signal High
(signal is open collector)
4.8
5
Under Voltage Threshold
Vout rising
V
V
1.66
1.62
Under Voltage Threshold
Vout falling
Note: On/off pin designed to work with an open collector/drain switch.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 5
NON-ISOLATED DC/DC CONVERTERS
POWER PRODUCTS
3 – 15V Input / 1.8V Output / 16A
BP06SRDC-16D180
Efficiency Data
Module 1.80V
95%
90%
85%
80%
75%
70%
3.3V
5.0V
12V
65%
1.6
4.0
8.0
12.0
16.0
Output Current
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 6
NON-ISOLATED DC/DC CONVERTERS
3 – 15V Input / 1.8V Output / 16A
POWER PRODUCTS
BP06SRDC-16D180
UVLO
Termination Resistance
Termination
Resistance
Rising Vin
UVLO
Falling Vin
UVLO
Open Circuit
10.2K Ω
5.36K Ω
4.75K Ω
3.48K Ω
3.01K Ω
2.49K Ω
2.37K Ω
2.92V
4.50V
6.06V
6.50V
8.00V
9.00V
10.5V
11.0V
2.85V
4.14V
5.28V
5.60V
6.58V
7.14V
8.00V
8.26V
Output VoltageTrim Range
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 7
NON-ISOLATED DC/DC CONVERTERS
POWER PRODUCTS
3 – 15V Input / 1.8V Output / 16A
BP06SRDC-16D180
Ripple and Noise
Ripple and noise at full load and 12.0Vdc input,
and Ta=25° C
Ripple and noise at full load and 12.0Vdc input,
and Ta=25° C with 560 µF external cap
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 8
NON-ISOLATED DC/DC CONVERTERS
POWER PRODUCTS
3 – 15V Input / 1.8V Output / 16A
BP06SRDC-16D180
Transient Response
Transient response: di/dt = 1.0A/µS
Vout=1.8V
Vout=1.8V
50% to 100% load transients at 12.0V input and Ta=25° C
100% to 50% load transients at 12.0V input and Ta=25° C
Transient response: di/dt = 1.0A/µS, external load capacitance 560µF
Vout=1.8V
Vout=1.8V
100% to 50% load transients at 12.0V input and Ta=25° C
50% to 100% load transients at 12.0V input and Ta=25° C
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 9
NON-ISOLATED DC/DC CONVERTERS
POWER PRODUCTS
3 – 15V Input / 1.8V Output / 16A
BP06SRDC-16D180
Thermal Considerations
Derating Curve VIN = 12V
18
16
200LFM
100LFM
14
12
10
Natural Convection
8
6
4
2
0
50
60 70
0
10
20
30
40
Ambient Temperature, Ta (˚C)
Output Current vs. Local Ambient
Temperature and Air Velocity
Derating Curve VIN = 5V (and 3.3V where applicable)
18
16
14
12
10
200LFM
100LFM
Natural Convection
8
6
4
2
0
50
60 70
0
10
20
30
40
Ambient Temperature, Ta (˚C)
Output Current vs. Local Ambient
Temperature and Air Velocity
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 10
NON-ISOLATED DC/DC CONVERTERS
3 – 15V Input / 1.8V Output / 16A
POWER PRODUCTS
BP06SRDC-16D180
Mechanical
0.090
[2.29]
2.013
[51.13]
max
4
9
8
0.100
[2.54]
3
2
7
6
5
0.120
[3.05]
1
1.020
[25.91]
max
2.125
0.800
[20.33]
0.200 [5.08]
[53.98]
0.400
[10.17]
2.305
[58.55]
0.600
[15.23]
0.200
[5.08]
Recommended PCB Pad Layout
0.300
[7.62]
0.070
[1.78]
2.265
[57.52]
max
0.400
[10.17]
max
Dimensions are in inches [millimeters].
Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted.
Pin
1
Function
Control Ground
2
On/Off Control
1. Pin 3 not used on module S7DC-16D180, used for
31
42
5
No Connection
No Connection
+Vo
- sense on S7DC-16D18D and used for power good
signal on the S7DC-16D18S module.
2. Pin 4 not used on module S7DC-16D180, used for
+ sense on both the S7DC-16D18S and S7DC-16D18D
modules.
6
Trim
7
Power Ground
Power Ground
+Vin
8
9
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other
hazardous substances from electronic products. These parts are not however compatible with
the higher temperatures associated with lead free solder processes and must be soldered
using a reflow profile with a peak temperature of no more than 240ºC.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F / 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
PrestonTechnology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
page 11
相关型号：
©2020 ICPDF网 联系我们和版权申明