SRBH-06H1A1 [BEL]
8 - 36 VDC Input;型号: | SRBH-06H1A1 |
厂家: | BEL FUSE INC. |
描述: | 8 - 36 VDC Input |
文件: | 总14页 (文件大小:1231K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The SRBH-06H1A1 is part of the low-cost non-isolated DC-DC
power converter series providing up to 6 A output current.
The output is closely regulated and the efficiency of 3.3 VDC output
is typically 89% at full load.
Typical features include remote on/off, input under-voltage lockout,
over current protection and short circuit protection.
8 - 36 VDC Input
3.3 - 5 VDC @ 6 A Output
Non-Isolated Output
High Efficiency
High Power Density
Excellent Thermal Performance
OCP/SCP
Remote On/Off
•
•
•
•
•
•
•
•
•
•
•
Input Under-Voltage Lockout
Low Cost
Class II, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592B)
Distributed Power Architectures
Data Networking Equipment
Telecommunications Applications
•
•
•
2
SRBH-06H1A1
MAX.
OUTPUT
CURRENT
MAX.
OUTPUT
POWER
MODEL
NUMBER
OUTPUT
VOLTAGE
INPUT
VOLTAGE
TYPICAL EFFICIENCY
SRBH-06H1A1G
SRBH-06H1A1R
3.3 - 5 V
8 - 36 V
6 A
30 W
89% (Vo = 3.3 V, Io = 6 A)
S
R
BH
-
06
H
1A
1
x
RoHS
Status
Output
Current
Mounting Type
Series Name
Input Range
Output Voltage
Active Logic
Package Type
R – Tape & Reel
Package
Arrow Head
SMD
RoHS
6 A
8 – 36 V
Active High
3.3 - 5.0 V
G – Tray Package
PARAMETER
DESCRIPTION
MIN
TYP
MAX
UNITS
Continuous Non-operating Input
Voltage
-0.3
-
38
V
Remote On/Off
Ambient Temperature
Storage Temperature
Altitude
-0.3
-40
-40
-
-
-
-
-
12
85
V
C
C
m
125
2000
NOTE: Ratings used beyond the maximum ratings may cause a reliability degradation of the converter or may permanently damage the
device.
All specifications are typical at 25°C unless otherwise stated.
PARAMETER
DESCRIPTION
MIN
TYP
-
MAX
UNITS
V
Operating Input Voltage
8
-
36
-
Input Current (full load)
Vin = 12 V, Vo = 3.3 V, Io = 6 A
1.9
30
1.7
50
70
-
A
Input Current (no load)
-
-
mA
mA
mA
mA
A2s
V
Remote Off Input Current
Input Reflected Ripple Current (rms)
Input Reflected Ripple Current (pk-pk)
I2t Inrush Current Transient
Turn on Voltage Threshold
Turn off Voltage Threshold
-
-
-
100
150
1
1 µH, 2*100 µF/50 V electrolytic capacitors,
3*4.7 µF/50 V ceramic capacitor at the input.
-
-
-
7
7.5
-
Input under voltage lockout (UVLO).
3.5
4
V
CAUTION: All specifications are typical at nominal input, full load at 25°C unless noted.
tech.support@psbel.com
3
SRBH-06H1A1
All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
PARAMETER
DESCRIPTION
MIN
TYP
3.300
±10
±10
30
MAX
3.366
±20
±20
50
UNITS
V
Output Voltage Set Point
Load Regulation
Vin = 12 V, Io = 50% full load
3.234
-
-
mV
mV
mV
mV
mV
A
Line Regulation
Regulation Over Temperature
Ripple and Noise (pk-pk)
Ripple and Noise (rms)
Output Current Range
Output DC Current Limit
Turn on Time (from Vin)
Turn on Time (from Enable)
Output Capacitance
Transient Response
△V 50%~100% of Max Load
Settling Time
-40 °C to 85 °C
Vout = 3.3 V
-
-
60
100
50
-
25
0
-
6
Hiccup mode
7
10
13
A
-
6
10
ms
ms
µF
-
1
-
220
-
1200
-
-
-
-
100
300
100
300
200
500
200
500
mV
µs
di/dt = 0.5 A/µs; Vin = 12 V; Vout = 3.3 V;
with a 220 µF Oscan capacitor at the output
△V 100%~50% of Max Load
Settling Time
mV
µs
PARAMETER
Efficiency
DESCRIPTION
MIN
TYP
MAX
UNITS
%
Vin = 12 V, Vo = 3.3 V, full load
87
-
89
300
-
-
Switching Frequency
Output Trim Range
Weight
kHz
V
3.3
-
-
5
-
4.3
g
MTBF
-
426,574,0
-
hours
inch
mm
0.885 x 0.512 x 0.320
22.48 x 13.00 x 8.13
Dimensions (L × W × H)
PARAMETER
DESCRIPTION
MIN
TYP
MAX
UNITS
Enable
Signal Low (Unit Off)
Signal High(Unit On)
Sourcing current
-0.3
2.8
-
-
-
-
1
V
V
ENABLE pin open, unit on
12
10
µA
Asia-Pacific
Europe, Middle East
North America
+86 755 298 85888
+353 61 49 8941
+1 866 513 2839
© 2021 Bel Power Solutions & Protection
BCD.20143_AG
4
SRBH-06H1A1
Efficiency vs.Output Currentat Tnor
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
8V
12V
24V
36V
0.3
0.6
1.2
1.8
2.4
3
3.6
4.2
4.8
5.4
6
OUTPUT CURRENT (Amp)
Figure 1. Efficiency data
Airflow Direction
Figure 2. Airflow direction
Figure 3. Thermal derating curve @ Vin = 12 V, Vo = 3.3 V
tech.support@psbel.com
5
SRBH-06H1A1
Figure 4. Ripple and noise at no load, Vin = 12 V
Figure 5. Ripple and noise at full load, Vin = 12 V
Figure 6. Ripple and noise at no load, Vin = 24 V
Figure 7. Ripple and noise at full load, Vin = 24 V
Asia-Pacific
+86 755 298 85888
Europe, Middle East
North America
+1 866 513 2839
+353 61 49 8941
© 2021 Bel Power Solutions & Protection
BCD.20143_AG
6
SRBH-06H1A1
Figure 8. Ripple and noise at no load, Vin = 36 V
Figure 9. Ripple and noise at full load, Vin = 36 V
Note: Ripple and Noise at 3.3 VDC output, with a 220 µF oscan capacitor cap at the output, Ta = 25°C
tech.support@psbel.com
7
SRBH-06H1A1
Figure 10. Startup
Figure 11. Shutdown
Test Condition: Vin = 12 V, Iout = 6 A, with a 220 µF oscan capacitor at the output.
Figure 12. 50% to 100% load transient at 12 Vdc input
5 Vdc output and Ta = 25°C
Figure 13. 100% to 50% load transient at 12 Vdc input,
5 Vdc output and Ta = 25°C
Test Condition: di/dt = 0.5 A/µs, Vin = 12 V, with a 220 µF oscan capacitor at the output.
Asia-Pacific
+86 755 298 85888
Europe, Middle East
+353 61 49 8941
North America
+1 866 513 2839
© 2021 Bel Power Solutions & Protection
BCD.20143_AG
8
SRBH-06H1A1
Under-voltage Lockout
Voltage Falling
Voltage Rising
Input Voltage (V)
V1
V2
Figure 14. Input under-voltage lockout
V1 = 4 V
V2 = 7 V
Equations for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vadj) and the nominal output voltage of the
converter (Vnom = 3.3 V) are shown below. The Trim Down resistor should be connected between the Trim pin and Vout. The Trim
Up resistor should be connected between the Trim pin and Ground. Only one of the resistors should be used for any given
application.
151.6
Rtrimdown=
− 70.2
Vnom-Vadj
33.7
Rtrimup=
-14
Vadj-Vnom
tech.support@psbel.com
9
SRBH-06H1A1
The SRBH-06H1A1 modules are designed to be compatible with reflow soldering process. The suggested Pb-free solder paste is
Sn/Ag/Cu(SAC). The recommended reflow profile using Sn/Ag/Cu solder is shown in the following. Recommended reflow peak
temperature is 245°C while the part can withstand peak temperature of 260°C maximum for 10seconds. This profile should be
used only as a guideline. Many other factors influence the success of SMT reflow soldering. Since your production environment
may differ, please thoroughly review these guidelines with your process engineers.
Figure 15. Soldering information
The SRBH-06H1A1 modules have a MSL rating of 3.
The SRBH-06H1A1 modules are designed to be compatible with J-STD-033 Rev:A (Handling, Packing, Shipping and Use of
Moisture /Reflow Sensitive surface Mount devices). Moisture barrier bags (MBB) with desiccant are applied. The recommended
storage environment and handling procedure is detailed in J-STD-033.
This component has been designed, handled, and packaged ready for Pb-free reflow soldering. If the assembly shop follows J-
STD-033 guidelines, no pre-bake of this component is required before being reflowed to a PCB. Our packaging tray can only
withstand temperature of 70°C max.
Asia-Pacific
Europe, Middle East
North America
+86 755 298 85888
+353 61 49 8941
+1 866 513 2839
© 2021 Bel Power Solutions & Protection
BCD.20143_AG
10
SRBH-06H1A1
Figure 16. Outline
NOTES:
1) All Pins: Material - Copper Alloy;
Finish – Gold plated
Un-dimensioned components are shown for visual reference only.
All dimensions in inch [mm]; Tolerances: x.xx +/-0.02 inch [0.51 mm]. x.xxx +/-0.010 inch [0.25 mm].
2)
3)
tech.support@psbel.com
11
SRBH-06H1A1
Figure 17. Pins
PIN
1
FUNCTION
Remote On/Off
Vin
PIN
5
FUNCTION
Trim
2
6
N/A
3
GND
7
N/A
4
Vout
Figure 18. Recommended pad layout
Asia-Pacific
Europe, Middle East
North America
+86 755 298 85888
+353 61 49 8941
+1 866 513 2839
© 2021 Bel Power Solutions & Protection
BCD.20143_AG
12
SRBH-06H1A1
375
250
3.625
Figure 19. Packaging information-1
tech.support@psbel.com
13
SRBH-06H1A1
Figure 20. Packaging information-2
Asia-Pacific
Europe, Middle East
North America
+86 755 298 85888
+353 61 49 8941
+1 866 513 2839
© 2021 Bel Power Solutions & Protection
BCD.20143_AG
14
SRBH-06H1A1
DATE
REVISION
CHANGES DETAIL
APPROVAL
S.Wang
2017-03-23
2017-05-16
AA
AB
First release.
Change MTBF UVLO, Add packaging information.
S.Wang
Update Line and load Regulation, Output Current Limit, Transient response, Input
Reflected Ripple Current.
2017-08-29
AC
S.Wang
2018-04-26
2018-05-24
2021-01-11
2021-07-05
AD
AE
AF
AG
Update PRE-BAKING.
S.Wang
S.Wang
XF.Jiang
XF.Jiang
Add G – Tray package, Update MD.
Update outline notes to gold plated.
Add object ID. Add thermal test airflow direction.
For more information on these products consult: tech.support@psbel.com
NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
tech.support@psbel.com
相关型号:
©2020 ICPDF网 联系我们和版权申明