0RCR-3012L [BEL]
ISOLATED DC/DC CONVERTERS; 隔离式DC / DC转换器型号: | 0RCR-3012L |
厂家: | BEL FUSE INC. |
描述: | ISOLATED DC/DC CONVERTERS |
文件: | 总7页 (文件大小:158K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
0RCR-30S12x
RoHS Compliant
Rev.E
•
•
•
•
•
Isolated
•
•
•
•
•
Input Under-Voltage Lockout
Input Over-Voltage Shutdown
OCP/SCP
Fixed Frequency
High Efficiency
High Power Density
Low Cost
Over Temperature Protection
Remote On/Off
Description
The 0RCR-30S12x are isolated DC/DC converters that operate from a nominal 48 VDC source. These
converters use a full bridge power train to provide isolation and step down. These units will provide up to 300 W
of output power from a nominal 48 VDC input. These units are designed to be highly efficient and low cost.
Features include remote on/off, over current protection and under voltage lockout. These converters are provided
in an industry standard eighth-brick package.
Part Selection
Output
Input
Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number Model Number
Voltage
Active Low
Active High
11.8 V
48 V
25 A
300 W
96%
0RCR-3012L
0RCR-30S120
Notes: 1. Add “G” suffix at the end of the model number to indicate Tray Packaging.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
-0.3 V
-
80 V
Non-operating
Operating
Input Voltage (continuous)
-0.3 V
2 V
-
-
-
-
-
-
-
57 V
20 V
Module Off
Module On
Module On
Module Off
Remote On/Off (Active Low)
Remote On/Off (Active High)
0 V
0.4 V
20 V
2 V
0 V
0.4 V
85 °C
125 °C
Ambient Temperature
Storage Temperature
-40 °C
-55 °C
Input Specifications
Parameter
Min
Typ
Max
Notes
Input Voltage
38 V
-
55 V
Input Current (full load)
Input Current (no load)
Remote Off Input Current
-
-
-
-
8.5 A
150 mA
15 mA
Vin=38 V
90 mA
8 mA
Tested with simulated source
impedance of 12 uH, 5 Hz to 20 MHz;
use a 100 uF/100 V electrolytic
capacitor and 1 uF/100 V ceramic
capacitor at the input.
Input Reflected Ripple Current (pk-pk)
-
25 mA
50 mA
Input Reflected Ripple Current (rms)
I2t Inrush Current Transient
-
-
5 mA
TBD
10 mA
-
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
Input Specifications (continued)
Parameter
Min
Typ
Max
Notes
58 V
60 V
62 V
Turn-Off Voltage Threshold
Input Over-Voltage Protection Threshold
57 V
33 V
32 V
59 V
35 V
61 V
36.5 V
35 V
Turn-On Voltage Threshold
Turn On Voltage Threshold
Turn Off Voltage Threshold
33.5 V
Note: All specifications are typical at 25 °C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Notes
Output Voltage Set Point
Vin=38 V
Vin=48 V
Vin=55 V
-
-
-
9.4 V
11.8 V
13.5 V
-
-
-
lo=no load
Load Regulation
Output Current
-
400 mV
600 mV
25 A
0 A
-
-
-
Vin=48 V
Operating Output Power Range
Current Limit Threshold
0 W
300 W
165%Po
110%Po
Short Circuit Surge Transient
Ripple and Noise (rms)
-
-
TBD
-
Test conditions:
15 mV
50 mV
0-20 MHz BW, with a 1 uF ceramic
cap and a 47 uF tantalum cap at
the output.
Ripple and Noise (pk-pk)
-
50 mV
120 mV
Turn on Time
-
-
15 mS
20 mS
5%
Overshoot at Turn on
Output Capacitance
-
-
0 uF
3300 uF
Transient Response
Overshoot
Settling Time
Overshoot
-
-
-
-
-
-
-
-
200 mV
50% ~ 75%
Max Load
Test conditions: di/dt = 0.1 A/uS,
Vin=48 V, with a 1 uF ceramic
cap and a 47 uF tantalum cap at
the output.
100 uS
200 mV
100 uS
Vin=48 V
75% ~ 50%
Max Load
Settling Time
Note: All specifications are typical at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
General Specifications
Parameter
Min
Typ
Max
Notes
Efficiency
95%
96%
-
Vin=48 V, full load, 25°C
Switching Frequency
Isolation Capacitance
-
-
250 kHz
3900 pF
-
-
Isolation Voltage
-
-
1500 V
-
-
Over Temperature Protection
125 °C
Calculated Per Bell Core SR-332
(Vin=48 V; IO=80% full load; Ta = 25
°C)
MTBF
TBD
Dimensions
Inches (L × W × H)
Millimeters (L × W × H)
2.30 x 0.896 x 0.50
58.41 x 22.76 x 12.7
Weight
-
42 g
-
Note: All specifications are typical at 25 °C unless otherwise stated.
Control Specifications
Parameter
Min
Typ
Max
Notes
Remote On/Off
Signal High (Unit Off)
Signal Low (Unit On)
Signal High (Unit On)
Signal Low (Unit Off)
2 V
0 V
2 V
0 V
-
-
-
-
20 V
0.4 V
20 V
0.4 V
Active Low
Active High
The remote on/off pin is open: If
active low, the Unit Off; If active
high, the Unit On.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
Efficiency Data
99.0%
98.0%
97.0%
96.0%
95.0%
94.0%
93.0%
92.0%
91.0%
90.0%
38 V
48 V
55V
3.2
6.4
9.6 12.8 16 19.2 22.4 25.6 28.8 32
Output current
Thermal Derating Curve
This derating curve is tested when Vin=48 Vdc
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
Ripple and Noise Waveforms
38 Vdc input
48Vdc input
55 Vdc input
Note: Ripple and noise at full load, with 1 uF ceramic cap and 47 uF Tan cap at the output, and Ta=25 deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
Transient Response Waveforms
50% to 75% load Transient at 38 Vdc input
75% to 50% load Transient at 38 Vdc input
75% to 50% load Transient at 48 Vdc input
75% to 50% load Transient at 55 Vdc input
50% to 75% load Transient at 48 Vdc input
50% to 75% load Transient at 55 Vdc input
Note: Transient response at di/dt=0.1 A/uS, with 1 uF ceramic cap and 47 uF Tan cap at the output, and Ta=25
deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 VDC Input 11.8 VDC/25 A Output, 1/8 Brick
Mechanical Outline
Pin Connections
Pin
Function
Pin Size
1
Vin+
0.040’’
2
3
4
5
On/Off
Vin-
0.040’’
0.040’’
0.062’’
0.062’’
Vout-
Vout+
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products.
©2008 Bel Fuse Inc. Specifications subject to change without notice. 121808
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
相关型号:
0RCR-30S120G
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, ROHS COMPLIANT, 1/8 BRICK PACKAGE-5
BEL
0RCR-40S100G
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, ROHS COMPLIANT, 1/8 BRICK PACKAGE-5
BEL
0RCR-40S10LG
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, ROHS COMPLIANT, 1/8 BRICK PACKAGE-5
BEL
©2020 ICPDF网 联系我们和版权申明