01DT-5LH [BELIMO]
Duct / Immersion Temperature Sensor;型号: | 01DT-5LH |
厂家: | BELIMO |
描述: | Duct / Immersion Temperature Sensor |
文件: | 总4页 (文件大小:404K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical data sheet
01DT-5L..
Duct / Immersion Temperature Sensor
For measuring temperature in duct
applications. In connection with a stainless
steel or brass thermowell also applicable for
pipe applications. NEMA 4X / IP65 rated
enclosure.
Type Overview
Type
Output signal
NTC10k2
NTC10k2
NTC10k2
NTC10k2
NTC10k2
NTC10k2
Probe length
2" [50 mm]
Probe diameter
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
01DT-5LH
01DT-5LL
01DT-5LN
01DT-5LP
01DT-5LR
01DT-5LT
4" [100 mm]
6" [150 mm]
8" [200 mm]
12" [300 mm]
18" [450 mm]
Technical Data
Electrical Data Electrical connection
Cable entry
Removable spring loaded terminal block max.
2.5 mm²
Cable gland with strain relief Ø6...8 mm (1/2"
NPT conduit adapter included)
Functional Data
Measuring Data
Output signal passive temperature
Application
NTC10k2
air
water
Measuring values
temperature
Measuring range temperature
-60...300°F [-50...150°C]
Accuracy temperature passive
±0.35°F @ 77°F [±0.2°C @ 25°C]
Time constant t (63%) in the air duct
typical 210 s @ 0 m/s
typical 46 s @ 3 m/s
Time constant t (63%) in water pipe
with thermowell A-22P-A.. and thermal
contact fluid
typical 7 s with thermowell brass
typical 9 s with thermowell stainless steel
Materials
Cable gland
Housing
plug adapter: PA66, black
nut: PA6, black
cover: lexan, orange
base: lexan, orange
seal: 0467 NBR70, black
UV resistant
www.belimo.com
01DT-5L.. • en-us • 2019-08-20 • Subject to change
1 / 4
Technical data sheet
01DT-5L..
Safety Data Ambient humidity
max. 95% r.H., non-condensing
Ambient temperature
Fluid temperature
-30...120°F [-35...50°C]
-60...300°F [-50...150°C]
max. 195°F [90°C]
Housing surface temperature
Protection class IEC/EN
Protection class UL
EU Conformity
III safety extra-low voltage (selv)
UL Class 2 Supply
CE Marking
Certification IEC/EN
Certification UL
IEC/EN 60730-1
cULus acc. to UL60730-1A/-2-9, CAN/CSA
E60730-1:02/-2-9
Degree of protection IEC/EN
Quality Standard
IP65
ISO 9001
Safety Notes
This device has been designed for use in stationary heating, ventilation and air-conditioning
systems and must not be used outside the specified field of application. Unauthorised
modifications are prohibited. The product must not be used in relation with any equipment
that in case of a failure may threaten humans, animals or assets.
Ensure all power is disconnected before installing. Do not connect to live/operating
equipment.
Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
The device contains electrical and electronic components and must not be disposed of as
household refuse. All locally valid regulations and requirements must be observed.
Remarks
General Remarks Concerning Sensors Due to self-heating with 2 wire passive sensors, the supply wire current affects the
measurement accuracy, so it should not exceed 1 mA.
When using lengthy connecting cables (depending on the cross section used), the cable
resistance must be taken into account. The lower the impedance of the sensor used, the
greater the effect of the line resistance on the measurement, because it generates an offset.
Scope of delivery
Scope of delivery Description
Mounting clip, with screws and adhesive foil
Type
A-22D-A11
1/2" NPT conduit adapter
www.belimo.com
01DT-5L.. • en-us • 2019-08-20 • Subject to change
2 / 4
Technical data sheet
01DT-5L..
Accessories
Optional accessories Description
Mounting plate S housing
Optional accessories air Description
Type
A-22D-A09
Type
Mounting flange for sensor probe 6 mm, up to max. 80°C, Plastic
Mounting flange for sensor probe 6 mm, up to max. 260°C, Brass
A-22D-A03
A-22D-A05
Recommended accessories water Description
Type
Thermowell pocket (fabricated) Stainless steel, 2" [50 mm], 1/2" NPT, A-22P-A05
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 4" [100 mm], 1/2" NPT, A-22P-A07
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 6" [150 mm], 1/2" NPT, A-22P-A09
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 8" [200 mm], 1/2" NPT, A-22P-A11
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 12" [300 mm], 1/2" NPT, A-22P-A13
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 18" [450 mm], 1/2" NPT, A-22P-A15
wrench size 3/4"
Thermowell pocket (machined) Stainless steel, 2" [50 mm], 1/2" NPT, A-22P-A36
wrench size 3/4"
Thermowell pocket (machined) Stainless steel, 4" [100 mm], 1/2" NPT, A-22P-A37
wrench size 3/4"
Thermowell pocket (machined) Stainless steel, 6" [150 mm], 1/2" NPT, A-22P-A38
wrench size 3/4"
Thermowell pocket (machined) Stainless steel, 8" [200 mm], 1/2" NPT, A-22P-A39
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 2" [50 mm], 1/2" NPT, wrench
size 3/4"
A-22P-A17
Thermowell pocket (fabricated) Brass, 4" [100 mm], 1/2" NPT, wrench A-22P-A19
size 3/4"
Thermowell pocket (fabricated) Brass, 6" [150 mm], 1/2" NPT, wrench A-22P-A21
size 3/4"
Thermowell pocket (fabricated) Brass, 8" [200 mm], 1/2" NPT, wrench A-22P-A23
size 3/4"
Thermowell pocket (fabricated) Brass, 12" [300 mm], 1/2" NPT, wrench A-22P-A25
size 3/4"
Thermowell pocket (fabricated) Brass, 18" [450 mm], 1/2" NPT, wrench A-22P-A27
size 3/4"
Syringe with thermal paste
A-22P-A44
Wiring Diagram
www.belimo.com
01DT-5L.. • en-us • 2019-08-20 • Subject to change
3 / 4
Technical data sheet
01DT-5L..
Dimensions
Dimensions
L = Probe length
.
Type
Probe length
2" [50 mm]
Weight
01DT-5LH
01DT-5LL
01DT-5LN
01DT-5LP
01DT-5LR
01DT-5LT
0.26 lb [0.12 kg]
0.26 lb [0.12 kg]
0.29 lb [0.13 kg]
0.29 lb [0.13 kg]
4" [100 mm]
6" [150 mm]
8" [200 mm]
12" [300 mm] 0.31 lb [0.14 kg]
18" [450 mm] 0.33 lb [0.15 kg]
www.belimo.com
01DT-5L.. • en-us • 2019-08-20 • Subject to change
4 / 4
相关型号:
©2020 ICPDF网 联系我们和版权申明