01CT-5BH [BELIMO]
Cable Temperature Sensor;型号: | 01CT-5BH |
厂家: | BELIMO |
描述: | Cable Temperature Sensor |
文件: | 总4页 (文件大小:345K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical data sheet
01CT-5..
Cable Temperature Sensor
Used as a duct temperature sensor with a
mounting flange or as an immersion
temperature sensor in combination with an
immersion sleeve. With stainless steel
probe and plenum-rated cable.
Type Overview
Type
Output signal
Pt100
Probe length
2" [50 mm]
2" [50 mm]
2" [50 mm]
2" [50 mm]
Probe diameter
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
0.24" [6 mm]
01CT-5AH
01CT-5BH
01CT-5EH
01CT-5LH
01CT-5MH
01CT-5QH
Pt1000
Ni1000 (JCI)
NTC10k (10k2)
NTC10k3 (Precon) 2" [50 mm]
NTC20k
2" [50 mm]
Technical Data
Electrical Data Electrical connection
Cable specification
cable 2 m, 2-wire
1 pair shielded plenum cable, 22AWG tinned
copper, green jacket, -40°F to 300°F (-40°C
to 150°C), 300 V
Functional Data
Output signal passive temperature
Pt100
Pt1000
Ni1000 (JCI)
NTC10k (10k2)
NTC10k3 (Precon)
NTC20k
Application
air
water
Measuring Data
Measuring values
Temperature
Measuring range temperature
-30...210°F [-35...100°C]
Accuracy temperature passive
Measuring current
Passive Sensors depending on used type
Pt.. = ±0.5°F @ 32°F [±0.3°C @ 0°C]
Ni.. = ±0.7°F @ 32°F [±0.4°C @ 0°C]
NTC.. = ±0.35°F @ 77°F [±0.2°C @ 25°C]
Pt100: <1 mA @ 32°F [0°C]
Pt1000: <0.3 mA @ 32°F [0°C]
Ni1000 (JCI): <5 mA @ 21°C [70°F]
NTC10k2: <2 mA @ 77°F [25°C]
NTC10k3: <2.7 mA @ 77°F [25°C]
NTC20k: <0.5 mA @ 77°F [25°C]
www.belimo.com
01CT-5.. • en-us • 2020-08-06 • Subject to change
1 / 4
Technical data sheet
01CT-5..
Safety Data Ambient humidity
max. 95% r.H., non-condensing
-30...210°F [-35...100°C]
-30...210°F [-35...100°C]
Ambient temperature
Fluid temperature
Protection class IEC/EN
Protection class UL
EU Conformity
III Safety Extra-Low Voltage (SELV)
UL Class 2 Supply
CE Marking
Certification IEC/EN
Certification UL
IEC/EN 60730-1
cULus acc. to UL60730-1A/-2-9, CAN/CSA
E60730-1:02/-2-9
Degree of protection IEC/EN
Degree of protection NEMA/UL
Quality Standard
IP67
NEMA 4X
ISO 9001
Safety Notes
This device has been designed for use in stationary heating, ventilation and air-conditioning
systems and must not be used outside the specified field of application. Unauthorised
modifications are prohibited. The product must not be used in relation with any equipment
that in case of a failure may threaten humans, animals or assets.
Ensure all power is disconnected before installing. Do not connect to live/operating
equipment.
Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
The device contains electrical and electronic components and must not be disposed of as
household refuse. All locally valid regulations and requirements must be observed.
Remarks
General Remarks Concerning Sensors Due to self-heating with 2 wire passive sensors, the supply wire current affects the
measurement accuracy, so it should not exceed 1 mA.
When using lengthy connecting cables (depending on the cross section used), the cable
resistance must be taken into account. The lower the impedance of the sensor used, the
greater the effect of the line resistance on the measurement, because it generates an offset.
www.belimo.com
01CT-5.. • en-us • 2020-08-06 • Subject to change
2 / 4
Technical data sheet
01CT-5..
Accessories
Optional accessories air Description
Type
Mounting flange for sensor probe 6 mm, up to max. 120°C [248°F],
Plastic
A-22D-A03
Mounting flange for sensor probe 6 mm, up to max. 260°C, Brass
A-22D-A05
Type
Recommended accessories water Description
Thermowell pocket (fabricated) Stainless steel, 2" [50 mm], 1/2" NPT, A-22P-A05
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 2" [50 mm], 1/2" NPT, wrench
size 3/4"
A-22P-A17
Thermowell pocket (machined) Stainless steel, 2" [50 mm], 1/2" NPT, A-22P-A36
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 4" [100 mm], 1/2" NPT, A-22P-A07
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 4" [100 mm], 1/2" NPT, wrench A-22P-A19
size 3/4"
Thermowell pocket (machined) Stainless steel, 4" [100 mm], 1/2" NPT, A-22P-A37
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 6" [150 mm], 1/2" NPT, A-22P-A09
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 6" [150 mm], 1/2" NPT, wrench A-22P-A21
size 3/4"
Thermowell pocket (machined) Stainless steel, 6" [150 mm], 1/2" NPT, A-22P-A38
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 8" [200 mm], 1/2" NPT, A-22P-A11
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 8" [200 mm], 1/2" NPT, wrench A-22P-A23
size 3/4"
Thermowell pocket (machined) Stainless steel, 8" [200 mm], 1/2" NPT, A-22P-A39
wrench size 3/4"
Thermowell pocket (fabricated) Stainless steel, 12" [300 mm], 1/2" NPT, A-22P-A13
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 12" [300 mm], 1/2" NPT, wrench A-22P-A25
size 3/4"
Thermowell pocket (fabricated) Stainless steel, 18" [450 mm], 1/2" NPT, A-22P-A15
wrench size 3/4"
Thermowell pocket (fabricated) Brass, 18" [450 mm], 1/2" NPT, wrench A-22P-A27
size 3/4"
Syringe with thermal paste
A-22P-A44
Wiring Diagram
www.belimo.com
01CT-5.. • en-us • 2020-08-06 • Subject to change
3 / 4
Technical data sheet
01CT-5..
Dimensions
Humidity seal rolling
L1: cable length
L2: pocket length
Type
Probe length
2" [50 mm]
2" [50 mm]
2" [50 mm]
2" [50 mm]
2" [50 mm]
2" [50 mm]
Weight
01CT-5AH
01CT-5BH
01CT-5EH
01CT-5LH
01CT-5MH
01CT-5QH
0.14 lb [0.065 kg]
0.14 lb [0.065 kg]
0.14 lb [0.065 kg]
0.14 lb [0.065 kg]
0.14 lb [0.065 kg]
0.14 lb [0.065 kg]
www.belimo.com
01CT-5.. • en-us • 2020-08-06 • Subject to change
4 / 4
相关型号:
©2020 ICPDF网 联系我们和版权申明