VS8EAPAF70 [BANNER]
VS8 Series Background Suppression Sensor;型号: | VS8EAPAF70 |
厂家: | Banner Engineering |
描述: | VS8 Series Background Suppression Sensor |
文件: | 总2页 (文件大小:133K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS8 Series Background Suppression Sensor
Datasheet
Sub-Miniature Photoelectric Proximity Sensor with Background Suppression
This guide is designed to help you set up and install the VS8. For complete information on programming, performance, troubleshooting, dimensions,
and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for p/n 201958 to view the Instruction Manual. Use
of this document assumes familiarity with pertinent industry standards and practices.
•
•
•
•
•
•
•
•
Miniature sensor with precise adjustable background suppression
Precise and reliable switching behavior even with varying object surfaces and colors
Reliable operation even with highly reflective machine parts in the background
Fixed range models ensure easy and consistent operation
Adjustable range models cover a wide variety of applications with a single model
Red laser, Red LED, and Blue LED types available to match sensing beam to application
Robust, glass-fiber-reinforced plastic housing
PNP or NPN output, depending on model
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device
does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor
failure or malfunction can cause either an energized or de-energized sensor output condition.
AVERTISSEMENT: Ne pas utiliser pour la protection de personnes
Ces produits ne doivent pas être utilisés comme systèmes de détection pour la protection de personnes. Une utilisation dans
de telles conditions pourrait entraîner des dommages corporels graves, voire mortels. Ce produit n'est pas équipé du circuit
redondant d'autodiagnostic nécessaire pour être utilisé dans des applications de protection personnelle. Une panne du
capteur ou un mauvais fonctionnement peut entraîner l'activation ou la désactivation de la sortie.
Models
1
1
Model
Sensing Mode
Range
Output
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
Model
Sensing Mode
Range
Output
PNP
NPN
PNP
NPN
PNP
NPN
VS8EAPAF70
VS8EANAF70
VS8EAPLAF70
VS8EANLAF70
VS8APFF30B
VS8ANFF30B
VS8APFF50B
VS8ANFF50B
VS8APFF15
VS8ANFF15
VS8APFF30
VS8ANFF30
VS8APFF50
VS8ANFF50
Red LED, Adjustable
Background Suppression
5 mm to 70 mm
(0.2 in to 2.8 in)
Red LED, Fixed 15 mm
Background Suppression
2 mm to 15 mm
(0.08 in to 0.59 in)
Red Laser, Adjustable
Background Suppression
6 mm to 70 mm
(0.24 in to 2.8 in)
Red LED, Fixed 30 mm
Background Suppression
2 mm to 30 mm
(0.08 in to 1.18 in)
Blue LED, Fixed 30 mm
Background Suppression
2 mm to 30 mm
(0.08 in to 1.18 in)
Red LED, Fixed 50 mm
Background Suppression
2 mm to 50 mm
(0.08 in to 1.97 in)
Blue LED, Fixed 50 mm
Background Suppression
2 mm to 50 mm
(0.08 in to 1.97 in)
Wiring Diagrams
3-Pin NPN Models
3-Pin PNP Models
4-Pin NPN Models
4-Pin PNP Models
Key
1. Brown
2. White
3. Blue
1
1
3
4
1
3
–
+
+
+
10-30V dc
10-30V dc
–
3
4
10-30V dc
–
10-30V dc
1
4. Black
–
3
4
+
Load
Load
4
Load
Load
2
2
Remote
Input
Remote
Input
1
Integral 2 m (6.5 ft) unterminated PUR cable models are listed.
•
To order the 200 mm (7.8 in) PUR cable model with a 4-pin M8/Pico quick disconnect, add suffix "Q" to the model number. AF and LAF models
only.
•
•
To order the 200 mm (7.8 in) PUR cable model with a 3-pin M8/Pico quick disconnect, add suffix "Q3" to the model number. FF models only.
To order the 200 mm (7.8 in) PUR cable model with a 4-pin M12/Euro quick disconnect, add suffix "Q5" to the model number. AF and LAF models
only.
Original Document
201943 Rev. C 068-14795
4 September 2018
201943
VS8 Series Background Suppression Sensor
Specifications
Supply Voltage and Current
Supply Protection Circuitry
Protected against reverse polarity and
short-circuit
Output Configuration
Single PNP or NPN on pin 4 (black wire)
with remote input on pin 2 (white wire)
Delay Before Power-Up
< 300 ms
Output Protection Circuitry
Protected against output short-circuit,
continuous overload, and false pulse on
power-up
Output Rating
50 mA
Output Response Time
500 µs
Indicators
LED models: 10 V dc to 30 V dc (10% max. ripple) at less than 20 mA, exclusive of
2 LED indicators on sensor top
load
Green on: Power on
Amber on: Output conducting
Laser models: 10 V dc to 30 V dc (10% max. ripple) at less than 12 mA, exclusive of
load
Emitter LED Wavelength
Red LED models: 650 nm
Blue LED models: 450 nm
Laser models: 655 nm
Switching Frequency
≤ 1000 Hz
Chemical Compatibility
ECOLAB certified (2 m cabled models
only)
Connections
2 m (6.5 ft) unterminated 4-wire PUR cable or 200 mm (7.8 in) PUR cable with a 3- or
4-pin M8/Pico-style or 4-pin M12/Euro-style male quick disconnect, depending on
model
Models ending in suffix "Q", "Q3", or "Q5" must be used with a UL recognized
cordset R/C (CYJV2)
Search p/n 201958 at www.bannerengineering.com to view the Instruction Manual
for more information on cordsets
®
Operating Conditions
Environmental Rating
IEC IP67
Certifications
Red LED models: –20 °C to +60 °C (–4 °F to +140 °F)
Blue LED models: –20 °C to +50 °C (–4 °F to +122 °F)
Laser models: –20 °C to +50 °C (–4 °F to +122 °F)
Storage Temperature: –20 °C to +80 °C (–4 °F to +176 °F)
UL Operating Temperature: –20 °C to +30 °C (–4 °F to +86 °F)
Construction
Housing, cable: PUR
Front screen: PMMA
Laser Classifications
All Models: Class 1; wavelength: 655 nm; frequency: 5 kHz; pulse duration: 3.2 µs;
limit value pulse: ≤ 2.3 mW. Reference IEC 60825-1:2001, Section 8.2.
All Models: Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to laser Notice No. 50 dated June 24, 2007.
Blue LED Models: Risk Group 2; possibly hazardous optical radiation emitted from
this product. Do not stare at the operating lamp. May be harmful to the eyes.
(EN62471)
Required Overcurrent Protection
Protection contre la surintensité requise
Dimensions
WARNING:
AVERTISSEMENT: Les
raccordements électriques
doivent être effectués par
du personnel qualifié
conformément aux
Electrical
14.6
2.8
connections must
be made by
Teach-in
LED 1
8
LED 2
qualified
personnel in
réglementations et codes
électriques nationaux et
locaux.
accordance with
local and national
electrical codes
and regulations.
Receiver
Emitter
Une protection de surintensité doit être fournie par
l'installation du produit final, conformément au tableau
fourni.
Overcurrent protection is required to be provided
by end product application per the supplied table.
Overcurrent protection may be provided with
external fusing or via Current Limiting, Class 2
Power Supply.
Supply wiring leads < 24 AWG shall not be
spliced.
For additional product support, go to
www.bannerengineering.com.
Vous pouvez utiliser un fusible externe ou la limitation de
courant pour offrir une protection contre la surtension dans
le cas d'une source d'alimentation de classe 2.
Les fils d'alimentation < 24 AWG ne peuvent pas être
raccordés.
ø2.6
ø4.9
Pour obtenir un support produit supplémentaire, rendez-
vous sur le site www.bannerengineering.com.
Câblage
d'alimentation
(AWG)
Protection contre la surtension requise
(ampères)
Sensor with Bracket (SMBVS8DT)
Supply Wiring
(AWG)
Required Overcurrent Protection
(Amps)
9.6
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
6.8
8.2
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,
any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or
the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER
PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner
Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such
purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this
document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is
provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明