TL50HZGRAOSI [BANNER]
TL50HZ High Brightness Universal AC Voltage Tower Light;型号: | TL50HZGRAOSI |
厂家: | Banner Engineering |
描述: | TL50HZ High Brightness Universal AC Voltage Tower Light |
文件: | 总6页 (文件大小:793K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TL50HZ High Brightness Universal AC Voltage
Tower Light
Datasheet
Multi-Color General-Purpose or Audible Indicators
•
Similar in design and construction to standard TL50 Tower Lights, but more than 4
times brighter, improving visibility in areas with high levels of ambient light
•
•
Rugged, cost-effective, and easy-to-install multi-segment indicators
Illuminated segments provide easy-to-see operator guidance and indication of
equipment status
•
•
•
•
•
•
Displays up to 5 colors
Available in black or light gray housing
Audible models available with standard, sealed, or omni-directional audible element
Compact devices are completely self-contained, no controller needed
100 V ac to 240 V ac operation
No assembly required
Non-Audible Models
1
2
3
Connection
Model
# of LED Colors
LED Colors
Inputs
TL50HZR
1
2
3
4
5
Red
TL50HZGR
Green, Red
4-wire PVC cable
TL50HZGYR
TL50HZBGYR
TL50HZWBGYR
Green, Yellow, Red
100 V ac to 240 V ac
Blue, Green, Yellow, Red
White, Blue, Green, Yellow, Red
5-wire PVC cable
6-wire PVC cable
Audible Models
# of LED
Colors
1
2
3
Standard Audible Model
LED Colors
Connection
Inputs
TL50HZRA
1
2
3
4
Red
4-wire PVC cable
TL50HZGRA
TL50HZGYRA
TL50HZBGYRA
Green, Red
100 V ac to
240 V ac
Green, Yellow, Red
Blue, Green, Yellow, Red
5-wire PVC cable
6-wire PVC cable
1
Sealed Audible Model
Pulsed at 1.6 Hz
# of LED
Colors
2
3
LED Colors
Connection
Inputs
Continuous
Staccato
TL50HZRALS
TL50HZRALS3
TL50HZRALS4
1
2
3
4
Red
4-wire PVC cable
TL50HZGRALS
TL50HZGYRALS
TL50HZBGYRALS
TL50HZGRALS3
TL50HZGYRALS3
TL50HZBGYRALS3
TL50HZGRALS4
TL50HZGYRALS4
TL50HZBGYRALS4
Green, Red
100 V ac to
240 V ac
Green, Yellow, Red
Blue, Green, Yellow, Red
5-wire PVC cable
6-wire PVC cable
1
Omni-Directional Sealed Audible Model
Pulsed at 1.6 Hz
# of LED
Colors
2
3
LED Colors
Connection
Inputs
Continuous
Staccato
TL50HZRAOS
TL50HZRAOS3
TL50HZRAOS4
1
2
Red
100 V ac to
240 V ac
4-wire PVC cable
TL50HZGRAOS
TL50HZGRAOS3
TL50HZGRAOS4
Green, Red
1
Models with black housing are listed. For gray housing, add the suffix "C" at the end of the cabled model number or before the "QP" in 150 mm (6 in) PVC
cable model numbers. For example, TL50HZRC or TL50HZRCQP.
The first color listed is the bottom color, going up in successive order. Four color options are only available in audible cabled models. Five color options are
only available in non-audible cabled models.
2
3
•
To order the 150 mm (6 in) PVC cable model, add the suffix "QP" to the model number. For example, TL50HZRQP.
•
Models with a quick disconnect require a mating cordset.
Original Document
169422 Rev. K
6 May 2019
169422
TL50HZ High Brightness Universal AC Voltage Tower Light
1
Omni-Directional Sealed Audible Model
Pulsed at 1.6 Hz
# of LED
Colors
2
3
LED Colors
Connection
Inputs
Inputs
Continuous
Staccato
TL50HZGYRAOS
TL50HZBGYRAOS
TL50HZGYRAOS3
TL50HZBGYRAOS3
TL50HZGYRAOS4
TL50HZBGYRAOS4
3
4
Green, Yellow, Red
5-wire PVC cable
6-wire PVC cable
Blue, Green, Yellow, Red
1
Omni-Directional Sealed Audible Model with Intensity Adjustment
# of LED
Colors
2
3
LED Colors
Connection
Continuous
TL50HZRAOSI
Pulsed at 1.6 Hz
TL50HZRAOS3I
Staccato
TL50HZRAOS4I
1
2
3
4
Red
4-wire PVC cable
TL50HZGRAOSI
TL50HZGYRAOSI
TL50HZBGYRAOSI
TL50HZGRAOS3I
TL50HZGYRAOS3I
TL50HZBGYRAOS3I
TL50HZGRAOS4I
TL50HZGYRAOS4I
TL50HZBGYRAOS4I
Green, Red
100 V ac to
240 V ac
Green, Yellow, Red
Blue, Green, Yellow, Red
5-wire PVC cable
6-wire PVC cable
Wiring Diagrams
Models with 1 to 3 Segments
4-Wire
Models with 4 Segments
5-Wire
Models with 5 Segments
6-Wire
3
4
1
3
Indicator
Indicator
Color
Indicator
Neutral
100-240V ac
Hot
Neutral
Neutral
Color
Color
100-240V ac
Hot
100-240V ac
Hot
1
1
C1
C1
C1
C2
2
4
5
6
2
3
2
4
5
C2/A
C2
C3
C3/A
C3
C4/A
C4
C5/A
4-Wire Key:
1 = Brown
5-Wire Key:
6-Wire Key:
1 = Brown
2 = Blue
3 = White
4 = Black
5 = Gray
1 = Brown
2 = Blue
3 = White
4 = Black
5 = Gray
6 = Red
C1 = Color 1
C2 = Color 2
C3 = Color 3
A = Audible
C1 = Color 1
C2 = Color 2
C3 = Color 3
C4 = Color 4
A = Audible
C1 = Color 1
C2 = Color 2
C3 = Color 3
C4 = Color 4
C5 = Color 5
A = Audible
2 = Blue
3 = Black
4 = White
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 169422 Rev. K
TL50HZ High Brightness Universal AC Voltage Tower Light
Specifications
Supply Voltage and Current
100 V ac to 240 V ac at 50 Hz or 60 Hz
Indicators—maximum current per LED color:
Indicators
LEDs are independently selected; 1 to 5 colors depending on model
Indicator Characteristics
•
•
•
60 mA at 100 V ac
55 mA at 120 V ac
40 mA at 240 V ac
Dominant Wavelength (nm) or
Color Temperature (CCT)
Lumen Output (Typical
at 25 °C)
Color
Standard Audible Alarm: 30 mA maximum current
Sealed Audible Alarm: 25 mA maximum current
Omni-Directional Sealed Audible Alarm: 45 mA maximum current
Green
Red
525 nm
625 nm
590 nm
475 nm
5000 K
60
32
23
23
50
Supply Protection Circuitry
Protected against transient voltages
Yellow
Blue
Input Response Time
Indicator On/Off: 500 milliseconds maximum
White
Leakage Current Immunity
500 µA
Connections
Application Note: The use of relay output PLC is recommended since there
is no leakage current. Solid state output PLCs often have leakage current
above 1 mA and, therefore, turn the light on in the off state. To counteract
the leakage current, a shunt resistor must be used. A resistor must be
applied from the neutral wire of the device to the hot wire of each channel of
the device.
Integral 4-pin, 5-pin, or 8-pin M12/Euro-style quick disconnect, or 2 m (6.5
ft) integral PVC cable, depending on model
Models with a quick disconnect require a mating cordset
Audible Alarm
Construction
Standard Audible Alarm: 2.7 kHz 500 Hz oscillation frequency; maximum
Bases and Covers: ABS
intensity 92 dB at 1 m (3.3 ft) (typical)
Light Segment: Polycarbonate
Sealed Audible Alarm: 2.9 kHz 250 Hz oscillation frequency; maximum
intensity 94 dB at 1 m (3.3 ft) (typical)
Vibration and Mechanical Shock
Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm
amplitude, 5 minutes sweep, 30 minutes dwell)
Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine
wave)
Omni-Directional Sealed Audible Alarm: 2.1 kHz 250 Hz oscillation
frequency; maximum intensity 99 dB at 1 m (3.3 ft) (typical)
Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 kHz
250 Hz oscillation frequency; maximum intensity 95 dB at 1 m (3.3 ft)
(typical)
Required Overcurrent Protection
Typical Reduction in Sound Intensity with Audible Adjustment (maximum to
minimum)
WARNING: Electrical connections must be
made by qualified personnel in accordance with
local and national electrical codes and
regulations.
•
•
•
Standard Audible: 30 dB
Sealed Audible: 20 dB
Omni-Directional Sealed Audible: 12 dB
Audible Adjustment
Overcurrent protection is required to be provided by end product
application per the supplied table.
Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to
adjust the audible intensity. (Do not exceed 1.5 turns or the cover may
detach during operation.) For maximum intensity, rotate the center plug
180° counterclockwise to remove it.
Overcurrent protection may be provided with external fusing or via Current
Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with
Intensity Adjustment: Rotate the front cover until the desired intensity is
reached.
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
Omni-Directional Sealed Audible Alarm: No adjustment.
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Operating Conditions
Non-Audible: –40 °C to +50 °C (–40 °F to +122 °F)
Standard and Sealed Audible: –20 °C to +50 °C (–4 °F to +122 °F)
95% at +50 °C maximum relative humidity (non-condensing)
Environmental Rating
UL Type 4X Indoor and UL Type 13
Non-Audible and Sealed Audible: IEC IP67
Standard Audible: IEC IP50
Certifications
P/N 169422 Rev. K
www.bannerengineering.com - Tel: + 1 888 373 6767
3
TL50HZ High Brightness Universal AC Voltage Tower Light
Dimensions
Tower Height (H)
# of
Colors
4x 26.9
[1.06]
Omni-Directional
Sealed Audible
Non-Audible
Standard Audible*
Sealed Audible
H
1
2
3
4
5
130.2 mm (5.1 in)
170.9 mm (6.7 in)
211.6 mm (8.3 in)
252.3 mm (9.9 in)
293.0 mm (11.5 in)
161.0 mm (6.3 in)
201.7 mm (7.9 in)
242.4 mm (9.5 in)
283.1 mm (11.1 in)
-
184.1 mm (7.2 in)
224.8 mm (8.9 in)
265.5 mm (10.5 in)
306.2 mm (12.1 in)
-
198.1 mm (7.8 in)
238.8 mm (9.4 in)
279.5 mm (11.0 in)
320.2 mm (12.6 in)
-
19
[0.75]
M30 x 1.5
45
[1.77]
* Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape
Ø50
1/2-14 NPSM
[1.97]
All measurements are listed in millimeters [inches], unless noted otherwise.
Accessories
Cordsets
4-Pin Micro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQAC2-406
MQAC2-415
1.83 m (6 ft)
4
3
42 Typ.
4.57 m (15 ft)
1
2
Straight
1/2-20 UNF-28
ø 14.5
MQAC2-430
9.14 m (30 ft)
1 = Brown
2 = Blue
3 = Black
4 = White
5-Pin Micro-Style Cordsets
Model
Length
Style
Dimensions
Pinout
MQAC2-506
MQAC2-515
1.83 m (6 ft)
4.57 m (15 ft)
3
4
42 Typ.
2
5
1
Straight
1/2-20 UNF-28
ø 14.5
MQAC2-530
9.14 m (30 ft)
1 = Brown
2 = Blue
3 = White
4 = Black
5 = Gray
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 169422 Rev. K
TL50HZ High Brightness Universal AC Voltage Tower Light
Mounting Brackets
All measurements are listed in millimeters [inches], unless noted otherwise.
SMB30A
•
45
SMB30FA
•
83.2
Right-angle bracket with curved
slot for versatile orientation
Clearance for M6 (¼ in)
hardware
Mounting hole for 30 mm sensor
12-ga. stainless steel
Swivel bracket with tilt and pan
movement for precise
adjustment
C
61
•
•
•
•
Mounting hole for 30 mm sensor
12-ga. 304 stainless steel
Easy sensor mounting to
extrude rail T-slot
B
•
•
68.9
36.3
B
A
A
69
•
Metric and inch size bolt
available
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50
Hole size: B= ø 30.1
45
SMB30MM
SMBAMS30P
•
12-ga. stainless steel bracket
with curved mounting slots for
versatile orientation
Clearance for M6 (¼ in)
hardware
•
•
Flat SMBAMS series bracket
30 mm hole for mounting
sensors
Articulation slots for 90°+
rotation
12-ga. 300 series stainless steel
57
70
C
C
A
•
•
93
•
•
57
B
B
Mounting hole for 30 mm sensor
A
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMBAMS30RA
SMB30SC
67
45
•
•
•
•
Right-angle SMBAMS series
bracket
30 mm hole for mounting
sensors
Articulation slots for 90°+
rotation
12-ga. (2.6 mm) cold-rolled steel
•
•
•
Swivel bracket with 30 mm
mounting hole for sensor
Black reinforced thermoplastic
polyester
Stainless steel mounting and
swivel locking hardware
included
B
C
53
58
A
B
48
29
A
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
LMBE12RA35
LMBE12RA45
55
35
65
45
•
Direct mounting of stand-off pipe, with
common bracket type
•
Direct mounting of stand-off pipe, with
38.25
38.25
common bracket type
Zinc-plated steel
•
•
•
Zinc-plated steel
•
•
•
1/2-14 NPSM nut
1/2-14 NPSM nut
1/2 - 14
NPSM NUT
1/2 - 14
NPSM NUT
Mounting distance from the wall to the
Mounting distance from the wall to the
center of the 1/2-14 NPSM nut is 45 mm
57
81
center of the 1/2-14 NPSM nut is 35 mm
2X Ø9
2X Ø11
Hole center spacing: 20.0
Hole center spacing: 35.0
LMB Sealed Right-Angle Bracket
Model
Description
Construction
LMB30RA
Black polycarbonate
Direct-Mount Models: Bracket kit with base, 30 mm
adapter, set screw, fasteners, O-rings, and gaskets.
LMB30RAC
LMBE12RA
LMBE12RAC
Gray polycarbonate
Black polycarbonate
Gray polycarbonate
Pipe-Mount Models: Bracket kit with base, ½-14 pipe
adapter, set screw, fasteners, O-rings, and gaskets.
For use with stand-off pipe (listed and sold separately).
P/N 169422 Rev. K
www.bannerengineering.com - Tel: + 1 888 373 6767
5
TL50HZ High Brightness Universal AC Voltage Tower Light
Elevated Mount System
Model
Features
Components
SA-M30TE12 - Black Acetal
•
•
•
Streamlined black acetal or white UHMW stand-off
pipe adapter/cover
Connects between 30 mm light base and ½ in.
NPSM/DN15 pipe
SA-M30TE12C - White UHMW
Mounting hardware included
Polished 304 Stainless
Steel
Black Anodized
Aluminum
Clear Anodized
Aluminum
SOP-E12-150SS
150 mm (6 in) long
SOP-E12-150A
150 mm (6 in) long
SOP-E12-150AC
150 mm (6 in) long
•
•
Elevated-use stand-off pipe (½ in. NPSM/DN15)
Polished 304 stainless steel, black anodized
aluminum, or clear anodized aluminum surface
½ in. NPT thread at both ends
SOP-E12-300SS
300 mm (12 in) long
SOP-E12-300A
300 mm (12 in) long
SOP-E12-300AC
300 mm (12 in) long
•
•
Compatible with most industrial environments
SOP-E12-900SS
SOP-E12-900A
SOP-E12-900AC
900 mm (36 in) long
900 mm (36 in) long
900 mm (36 in) long
SA-E12M30 - Black Acetal
•
•
•
Streamlined black acetal or white UHMW mounting
base adapter/cover
Connects between ½ in. NPSM/DN15 pipe and 30
mm (1-3/16 in) drilled hole
SA-E12M30C - White UHMW
Mounting hardware included
Pipe Mounting Flange
Pipe Mounting Flange
Model
Features
•
Construction
54
1/2-14
NPSM
Elevated-use stand-off pipes (½ in,
NPSM/DN15)
4x ø5.5
Die-cast zinc base with
black paint
SA-F12
ø28
ø70
•
M5 mounting hardware and nitrile gasket
included
10
ø40
•
•
Elevated-use stand-off pipes (½ in,
NPSM/DN15)
1/2-14 NPSM
2 x 120°
SA-F12-3
Black Polycarbonate
29
M4 mounting hardware and nitrile blend
gasket included
8.77
ø60
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明