SB12TRNR [BANNER]
SB12T Series Sensor;型号: | SB12TRNR |
厂家: | Banner Engineering |
描述: | SB12T Series Sensor |
文件: | 总3页 (文件大小:246K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SB12T Series Sensor
Datasheet
Emitter/receiver pair with a threaded barrel
•
•
Flange-mounted, small 12 mm (0.47 in) diameter tubular opposed mode sensor pair
Easy-to-mount; no brackets required—panel mount sensors in the pre-drilled hole
and tighten single retaining nut, resulting in reduced installation costs
•
•
Narrow effective beam allows for multiple sensors in close proximity
LED status indicators for Power ON, Output Overload, Signal Received, and
Marginal Signal
•
•
10 V dc to 30 V dc supply voltage with single NPN or PNP output, depending on
model
Light Operate (LO) or Dark Operate (DO), depending on model
WARNING:
•
•
•
Do not use this device for personnel protection
Using this device for personnel protection could result in serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-
energized (off) output condition.
Models
1
Model
Range
Supply Voltage
Output Type
SB12TE1
—
SB12TANR
SB12TRNR
SB12TAPR
SB12TRPR
NPN/LO
NPN/DO
PNP/LO
PNP/DO
1.5 m (59 in)
10 V dc to 30 V dc
Overview
The SB12T Emitter/Receiver pair is a cost effective sensor for large volume OEM applications. The threaded mounting system
works with any material with a thickness of 0.5 mm to 10 mm (0.02 in to 0.393 in). Simply drill or punch a hole with a diameter of
12.2 mm to 13.2 mm (0.48 in to 0.52 in). Insert the cable and sensor into the hole and tighten the retaining nut.
Wiring Diagrams
Emitter
PNP Receiver
NPN Receiver
3
1
1
3
+
3
–
–
10-30 V dc
–
10-30 V dc
+
10-30V dc
+
1
4
4
Load
Load
1
Only standard 2 m (6.5 ft) cable models are listed. To order a 150 mm (6 in) cable with a 3-pin threaded Pico-style M8 connector, add the suffix “Q3” to the
model number (for example SB12TE1Q3).
Original Document
147032 Rev. D
7 May 2019
147032
SB12T Series Sensor
Specifications
Sensing Beam
880 nm Invisible IR beam
Repeatability
350 µs
Sensing Range
1.5 m (59 in)
Switching Frequency
235 Hz
Supply Voltage
Indicators
10 V dc to 30 V dc; less than 15 mA exclusive of load
Green Power LED (emitter and receiver):
•
•
On indicates power on
Flashing indicates output short circuited (receiver only)
Supply Protection Circuitry
Protected against reverse polarity and transient over voltages
Amber Output LED (receiver only):
Delay at Power-up
Less than 1 second
•
•
On indicates light sensed
Flashing indicates marginal excess gain (1.0 to 1.5× excess gain)
Output Configuration
Construction
One solid state output, NPN or PNP, depending on model
ABS housing; polycarbonate lens; epoxy encapsulant, PVC jacketed cable
Output Rating
100 mA
Environmental rating
IEC IP67
OFF-state leakage current: < 10 µA
ON-state saturation voltage: < 0.2 V at 10 mA; < 0.6 V at 100 mA
Connections
2 m (6.5 ft) cable or 150 mm (6 in) cable with M8 threaded connection
Output Protection Circuitry
Protected against output short circuit, continuous overload, and transient
over voltages
Operating Conditions
–20 °C to +50 °C (–4 °F to +122 °F)
Certifications
Output Response Time
2.5 ms ON, 1.75 ms OFF
Dimensions
Beam Pattern
SB12T
Opposed Mode
150 mm
6"
100 mm
50 mm
0
4"
2"
0
50 mm
100 mm
150 mm
2"
4"
6"
0
0.4 m
16"
0.8 m
32"
1.2 m 1.6 m
48" 64"
2.0 m
80"
DISTANCE
Figure 1. Effective Beam Ø: 8.3 mm
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 147032 Rev. D
SB12T Series Sensor
Accessories
Cordsets
3-Pin Threaded M8/Pico-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
PKG3M-2
PKG3M-5
PKG3M-7
PKG3M-9
PKG3M-10
PKW3M-2
PKW3M-5
2 m (6.56 ft)
5 m (16.40 ft)
7 m (22.97 ft)
9 m (29.53 ft)
10 m (32.81 ft)
2 m (6.56 ft)
35 Typ.
Straight
ø 9.5
M8 x 1
4
1
3
28 Typ.
5 m (16.40 ft)
1 = Brown
3 = Blue
4 = Black
20 Typ.
Right-Angle
PKW3M-9
9 m (29.53 ft)
M8 x 1
ø 9.5
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明