QT50R-AFH-FL [BANNER]
R-GAGE⢠QT50R-AFH-FL Sensor;
| 型号： | QT50R-AFH-FL |
| 厂家： | 
Banner Engineering |
| 描述： | R-GAGE⢠QT50R-AFH-FL Sensor |
| 文件： | 总6页 (文件大小：351K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
™
R-GAGE QT50R-AFH-FL Sensor
Datasheet
Radar-based sensors for detecting moving and stationary targets
•
•
•
FMCW (true-presence) radar detects moving and stationary objects
Adjustable sensing field — ignores objects beyond setpoint
Easy setup and configuration of range, sensitivity, and output with simple DIP
switches
•
•
•
Sensing functions are unaffected by wind, falling rain or snow, fog, humidity,
air temperatures, or light
Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication
band
Rugged IP67 housing withstands harsh environments
Protected by US patents
CAUTION: Make No Modifications to this Product
Any modifications to this product not expressly approved by Banner Engineering could void the user's
authority to operate the product. Contact Banner Engineering for more information.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Maximum
Range
Supply
Voltage
1
2
Model
Connection
Telecom Approval
Output
Telecom approved for US and
Canada
QT50R-US-AFH-FL
QT50R-EU-AFH-FL
Bipolar NPN/PNP
DIP-switch-selectable N.O. or
N.C
5-wire 2 m (6.5
ft) integral cable
24 m (78 ft)
12 to 30 V dc
Telecom approved for Europe,
UK, Australia, New Zealand,
China, and Japan
Overview
Output 1 and 2 LEDs: Yellow (output energized); Red (configuration)
Power LED: Green (power ON)
Signal LED: Red (flashes in proportion to the signal strength)
Access the DIP switches behind the threaded cap on the sensor back (not
shown)
OUTPUT 2
OUTPUT 1
SIGNAL POWER
1
2
•
•
Standard 2 m (6.5 ft) cable models are listed.
To order the 5-pin M12/Euro-style quick disconnect model, add the suffix "Q". However, the Q is added before the last hyphen. For
example, QT50R-xx-AFHQ-FL.
Models with a quick disconnect (QD) connector require a mating cordset.See Quick Disconnect (QD) Cordsets on page 5.
•
For additional countries, contact Banner Engineering.
Original Document
195102 Rev. B
13 July 2016
195102
™
R-GAGE QT50R-AFH-FL Sensor
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this
emitted energy reflects back to the receiving antenna. Signal processing electronics in the sensor determine the distance
from the sensor to the object based on the time delay of the return signal. The sensor can be configured (via DIP switches)
to sense objects up to a specific distance, ignoring objects beyond this distance (also called background suppression).
R-GAGE setpoint distances, minimum and maximum (sensor will detect objects up to setpoint and ignore objects beyond
the setpoint).
EU Models
US Models
X
Y
Minimum setpoint distance
Maximum setpoint distance
2 m
(6.6 ft)
3.5 m
(11.5 ft)
Setpoint
24 m
(78.7 ft)
24 m
(78.7 ft)
3
D
Dead Zone
X
Y
D
Sensor Configuration
The sensing zone distance, sensitivity, and output configuration can be selected via the DIP switches on the back of the
sensor. Use the included spanner to open the screw-off cover on the back of the sensor and access the DIP switches.
Important: Tighten the DIP switch cover a full quarter turn after contact to maintain the watertight seal.
DIP Switch Functions
Switch
1, 2, 3
4, 5
Function
Sensing distance (detects objects from sensor face to this point)
Sensitivity (higher sensitivity sees weaker objects and has a larger beam pattern)
Normally open/normally closed output functionality
Response Speed
6
7, 8
DIP switch 1 is on the left and DIP switch 8 is on the right.
Distance Settings
Distance
Switch 1
Switch 2
Switch 3
EU Models
2 m (6.6 ft)
US Models
3.5 m (11.5 ft)
4 m (13.1 ft)
5 m (16.4 ft)
6 m (19.7 ft)
8 m (26.2 ft)
12 m (39.4 ft)
16 m (52.5 ft)
24 m (78.7 ft)
0
0
0
0
0
1
3 m (9.8 ft)
0
1
0
4 m (13.1 ft)
6 m (19.7 ft)
8 m (26.2 ft)
12 m (39.4 ft)
16 m (52.5 ft)
24 m (78.7 ft)
0
1
1
1*
1
0*
0
0*
1
1
1
0
1
1
1
* Default settings
NOTE: Highest sensitivity is achieved only if sensing distance is 8 m (26.2 ft) or less.
3
Typical dead zone: 0.4 m (1.3 ft) for moving and 1.0 m (3.3 ft) for stationary targets, but varies with target reflectivity
www.bannerengineering.com - Tel: +1-763-544-3164
2
P/N 195102 Rev. B
™
R-GAGE QT50R-AFH-FL Sensor
NOTE: Near-field sensitivity boost is enabled when set to 4 m (13.1 ft) or less.
Sensitivity Selection
Switch 4
Switch 5
Sensitivity
4 (Highest)
3 (High)
0*
0
0*
1
1
0
2 (Medium)
1 (Low)
1
1
* Default settings
NOTE: Use the sensitivity selection to ignore unwanted weak reflections within the field of view, and not to narrow the beam
width. Narrow-beam R-GAGE sensor models are available.
Output Configuration
* Default settings
Switch 6
NO/NC
NO
0*
1
NC
Response Time
Switch 7
Switch 8
On Total (ms)
1000
Off Total (ms)
Total (ms)
2000
0
0*
1
0
1*
0
1000
1000
2000
6000
2000
3000
1000
3000
1
1
2000
8000
* Default settings
Specifications
Supply Voltage
Indicators
Power LED: Green (power ON)
12 to 30 V dc, less than 100 mA, exclusive of load
Signal Strength LED: Red, flashes in proportion to signal strength.
Steady on at 4x excess gain. Only indicates signal amplitude, not
target distance.
Range
The sensor is able to detect a proper object (see Detectable Objects)
from 1 to 24 m (3.3 to 78.7 ft), depending on target
Output LEDs: Yellow (output energized) / Red (configuration)
Detectable Objects
Adjustments
Objects containing metal, water, or similar high-dielectric materials
DIP-switch-configurable sensing distance, sensitivity, response time,
and output configuration
Operating Principle
Frequency modulated continuous-wave (FMCW) radar
Construction
Operating Frequency
Housing: ABS/polycarbonate
Lightpipes: Acrylic
Access Cap: Polyester
US Models: 24.075–24.175 GHz, ISM Band
EU Models: 24.050–24.250 GHz, ISM Band
Maximum Output Power
ERP: 3.3 mW, 5 dBm
Output Protection
Protected against short circuit conditions
EIRP: 100 mW, 20 dBm
Operating Temperature
Supply Protection Circuitry
−40 °C to +65 °C (−40 °F to +149 °F)
Protected against reverse polarity and transient overvoltages
Environmental Rating
IEC IP67
P/N 195102 Rev. B
www.bannerengineering.com - Tel: +1-763-544-3164
3
™
R-GAGE QT50R-AFH-FL Sensor
Delay at Power-up
Connections
Less than 2 seconds
Integral 5-wire 2 m (6.5 ft) cable or M12 Euro-style QD fitting. QD
models require a mating cordset
Output Configuration
Certifications
Bipolar NPN/PNP output, 150mA; DIP switch 6 selects N.O. (default) or
N.C. operation
ETSI/EN 300 440
FCC part 15
RSS-210
CMIIT Category G
ARIB STD T-73
Response Time
DIP switches 7 & 8 select ON/OFF response time
for others, contact Banner Engineering
Country of Origin: USA
FCC ID: UE3QT50RUS—This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC: 7044A-QT50RCA—This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Son fonctionnement est soumis aux deux
conditions suivantes:(1) Ce dispositif ne peut causer des interférences; et(2) Ce dispositif doit accepter toute interférence,
y compris les interférences qui peuvent entraîner un mauvais fonctionnement de l'appareil.
Beam Pattern
Typical Beam Pattern (with BRTR-CC20E Radar Target, Radar Cross Typical Beam Pattern (with 4 different targets) at highest
2
Section = 50 m )
sensitivity level
Left-Right Beam Pattern
Left-Right Beam Pattern
20 m
10 m
0 m
20 m
10 m
0 m
Target 4
Sensitivity 4
Target 1
Sensitivity 1
4
4
3
3
2
2
1
1
10 m
20 m
10 m
20 m
0
10 m
20 m
30 m
40 m
0
10 m
20 m
30 m
40 m
Distance
Distance
2
1–4: Indicates sensitivity level
1: Weak Object (Radar cross section = 0.25 m )
2
2: Car (Radar cross section = 3 m )
2
3: Large Truck (Radar cross section = 50 m )
2
4: Passenger Train (Radar cross section = 300 m )
NOTE: The effective beam pattern depends on the sensitivity level and target properties.
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 195102 Rev. B
™
R-GAGE QT50R-AFH-FL Sensor
Dimensions
74.1 mm
(2.92")
46.1 mm
(1.82")
37.0 mm
(1.46")
4X Ø4.4 mm
(Ø 0.17")
38.1 mm
(1.50")
33.0 mm
(1.30")
50.8 mm
(2.00")
66.0 mm
(2.60")
19.7 mm
(0.78")
R45.0 mm
(R1.77")
37.0 mm
(1.46")
34.2 mm
(1.35")
M30 X 1.5
ISO-6g
50.8 mm
(2.00")
Wiring
Wiring Key:
1 = Brown
2 = White
3 = Blue
1
3
2
4
+
12-30V dc
–
Load 1
Load 2
5
4 = Black
shield (QD cordset)
5 = Gray (Do not connect)
NOTE: Banner recommends that the shield wire (QD cordsets only) be connected to earth ground or dc common. Shielded
cordsets are recommended for all QD models.
Accessories
Quick Disconnect (QD) Cordsets
5-Pin Threaded M12/Euro-Style Cordsets—with Shield
Model
Length
Style
Dimensions
Pinout (Female)
MQDEC2-506
MQDEC2-515
MQDEC2-530
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
2
1
4
44 Typ.
3
5
Straight
1 = Brown
2 = White
3 = Blue
M12 x 1
ø 14.5
MQDEC2-550
15.2 m (50 ft)
4 = Black
5 = Gray
P/N 195102 Rev. B
www.bannerengineering.com - Tel: +1-763-544-3164
5
™
R-GAGE QT50R-AFH-FL Sensor
5-Pin Threaded M12/Euro-Style Cordsets—with Shield
Model
Length
Style
Dimensions
Pinout (Female)
MQDEC2-506RA
MQDEC2-515RA
MQDEC2-530RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
30 Typ.
[1.18"]
Right-Angle
MQDEC2-550RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
NOTE: Pin 5 is not used.
Mounting Brackets
All measurements are in mm
67
SMB30SC
SMB30MM
57
70
•
•
•
Swivel bracket with 30 mm
mounting hole for sensor
Black reinforced
•
12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
Clearance for M6 (¼ in)
hardware
B
58
C
thermoplastic polyester
•
•
57
B
Stainless steel mounting and
swivel locking hardware
included
Mounting hole for 30 mm
sensor
A
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Weather Deflector
QT50RCK
•
•
Required if the R-GAGE is exposed to rain or snow
Prevents buildup of water or ice from interfering with sensor
performance
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
Copyright Notice
Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not
intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product
warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any
©
time. For the most recent version of any documentation, refer to: www.bannerengineering.com.
Banner Engineering Corp. All rights reserved.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号：
©2020 ICPDF网 联系我们和版权申明