Q45VR2FPQ [BANNER]
Q45VR2 Series Sensors;
| 型号： | Q45VR2FPQ |
| 厂家： | 
Banner Engineering |
| 描述： | Q45VR2 Series Sensors |
| 文件： | 总11页 (文件大小：400K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Q45VR2 Series Sensors
Datasheet
•
Advanced one-piece photoelectric sensors with outstanding opꢀcal performance and
extremely rugged design
•
•
Operate from 90 to 250 V ac (50/60 Hz)
SPDT electromechanical relay output for economical, high-capacity switching and
immunity to electrical noise
•
Mulꢀple sensing modes include: opposed, diffuse, retroreꢁecꢀve, and convergent, plus
glass and plasꢀc fiber opꢀc models
•
•
•
•
Switchable light/dark operate
Versaꢀle plug-in modules available for output ꢀming logic and/or signal strength display
1
™
Highly visible Power, Signal (AID System ), and Output indicator LEDs
Choice of prewired 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cable or Mini-style quick-
disconnect fiꢃng
•
•
Versaꢀle mounꢀng opꢀons
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 raꢀng
WARNING: Not To Be Used for Personnel Protecꢀon
Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel
safety applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output
condiꢀon.
Opposed-Mode Emiꢁer (E) and Receiver (R) Models
Because of their extremely high excess gain, these opposed-mode sensors are an excellent opꢀon for sensing
in contaminated or dirty areas, and are also the best choice for long-range sensing.
Range: 60 m (200 ꢂ)
OPPOSED
Output Type: SPDT Electro-mechanical relay
Eꢂecꢀve Beam: 13 mm
Infrared, 880 nm
Models
Cable
Excess Gain
Beam Paꢁern
Q452E Emiꢄer
Q45VR2R Receiver
Q452EQ Emiꢄer
2-wire 2 m (6.5 ꢂ) cable
5-wire 2 m (6.5 ꢂ) cable
3-Pin Mini-style QD
1000
Q45E/R
Opposed Mode
E
X
C
E
S
S
Q45E/R
Opposed Mode
1.5 m
60 in
1.0 m
0.5 m
0
40 in
20 in
0
100
10
0.5 m
1.0 m
1.5 m
20 in
40 in
60 in
G
A
I
N
Q45VR2RQ Receiver
5-Pin Mini-style QD
0
12 m
40 ft
24 m
80 ft
36 m
120 ft
48 m
160 ft
60 m
200 ft
1
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
DISTANCE
DISTANCE
To order the 9 m (30 ꢂ) cable models, add the suffix "W/30" to the cabled model number. (For example: Q452E W/30.) Models with a
quick disconnect (QD) connector require a maꢀng cable.
1
U.S. Patent no. 4356393
Original Document
36339 Rev. H
30 January 2017
36339
Q45VR2 Series Sensors
Retroreꢃecꢀve-Mode Models
The visible red sensing beam of these sensors makes them very easy to align. Model Q45VR2LP
polarizes the emiꢄed light and filters out unwanted reꢁecꢀons, making sensing possible in
applicaꢀons otherwise considered unsuited to retroreꢁecꢀve sensing. Specified using the model
BRT-3 3-inch reꢁector (see the Accessories secꢀon of your current Banner catalog for further
informaꢀon).
P
RETRO
POLAR RETRO
Output Type: SPDT Electro-mechanical relay
Visible red, 680 nm
(non-polarized)
Visible red, 680 nm
(polarized)
Non-Polarized - Range 0.08 to 9 m (3 in to 30 ꢄ)
Models
Cable
Excess Gain
Beam Paꢁern
1000
Q45VR2LV
5-wire 2 m (6.5 ꢂ) cable
Q45LV
E
X
C
E
S
S
Q45LV
Retroreflective Mode
75 mm
3.0 in
Retroreflective Mode
50 mm
25 mm
2.0 in
1.0 in
0
100
10
0
25 mm
50 mm
75 mm
With BRT-3 Reflector
1.0 in
2.0 in
3.0 in
G
A
I
Q45VR2LVQ
5-Pin Mini-style QD
With BRT-3 Reflector
N
0
3 m
10 ft
6 m
20 ft
9 m
30 ft
12 m
40 ft
15 m
50 ft
1
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
Polarized - Range 0.15 to 6 m (6 in to 20 ꢄ)
Cable Excess Gain
Models
Beam Paꢁern
1000
Q45VR2LP
5-wire 2 m (6.5 ꢂ) cable
Q45LP
E
X
C
E
S
S
Q45LP
Retroreflective
Mode
75 mm
3.0 in
Retroreflective Mode
50 mm
25 mm
0
2.0 in
1.0 in
0
100
10
With BRT-3 Reflector
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
G
A
I
With BRT-3 Reflector
Q45VR2LPQ
5-Pin Mini-style QD
N
0
1.5 m
5 ft
3 m
10 ft
4.5 m
15 ft
6 m
20 ft
7.5 m
25 ft
1
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
To order the 9 m (30 ꢂ) cable models, add the suffix "W/30" to the cabled model number. (For example: Q45VR2LV W/30.) Models with
a quick disconnect (QD) connector require a maꢀng cable.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36339 Rev. H
Q45VR2 Series Sensors
Diꢂuse-Mode Models
These diffuse-mode models detect objects by sensing the reꢁecꢀon of their own emiꢄed light. Ideal for use when the
reꢁecꢀvity and profile of the object to be sensed are sufficient to return a large percentage of emiꢄed light back to
the sensor. Model Q45VR2DX is the first choice for diffuse-mode applicaꢀons when there are no background objects
to falsely return light.
DIFFUSE
Performance curves are based on a 90% reꢁectance white test card.
Output Type: SPDT Electro-mechanical relay
Infrared, 880 nm
Short Range - 45 cm (18 inches)
Models
Cable
Excess Gain
Beam Paꢁern
1000
100
10
Q45VR2D
5-wire 2 m (6.5 ꢂ) cable
Q45D
Diffuse Mode
E
X
C
E
S
S
15 mm
0.6 in
Q45D
Diffuse Mode
10 mm
5 mm
0
0.4 in
0.2 in
0
5 mm
10 mm
15 mm
0.2 in
0.4 in
0.6 in
G
A
I
Q45VR2DQ
5-Pin Mini-style QD
N
0
100 mm 200mm 300 mm 400 mm 500 mm
4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
1
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
DISTANCE
DISTANCE
Long Range - 1.8 m (6 ꢄ)
Excess Gain
Models
Cable
Beam Paꢁern
Q45VR2DL
Q45VR2DLQ
5-wire 2 m (6.5 ꢂ) cable
5-Pin Mini-style QD
Q45DL
1000
Diffuse Mode
Q45DL
75 mm
3.0 in
E
X
C
E
S
S
50 mm
25 mm
0
2.0 in
1.0 in
0
Diffuse Mode
100
10
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
G
A
I
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
N
DISTANCE
1
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
High Power - 3 m (10 ꢄ) Range
Excess Gain
Models
Cable
Beam Paꢁern
1000
100
10
Q45VR2DX
5-wire 2 m (6.5 ꢂ) cable
Q45DX
E
X
C
E
S
S
Q45DX
75 mm
3.0 in
Diffuse Mode
Diffuse Mode
50 mm
25 mm
0
2.0 in
1.0 in
0
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
G
A
I
Q45VR2DXQ
5-Pin Mini-style QD
N
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
1
0.01 m
0.033 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
P/N 36339 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
3
Q45VR2 Series Sensors
Convergent-Mode Models
These sensors are ideal for reꢁecꢀve sensing of very small parts or profiles, and can accurately sense the posiꢀon of
parts approaching from the side. Will ignore all but highly reꢁecꢀve objects that are outside the sensing range.
Performance curves are based on a 90% reꢁectance white test card.
Output Type: SPDT Electro-mechanical relay
CONVERGENT
Visible red, 680 nm
Models
Focus
Cable
Excess Gain
Beam Paꢁern
1000
100
10
5-wire 2 m (6.5 ꢂ)
Q45VR2CV
Q45CV
Convergent Mode
cable
E
X
C
E
S
S
Q45CV
0.15 in
3.8 mm
Convergent Mode
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
38 mm (1.5 in) Spot
Size at Focus: 1.3 mm
(0.05 in)
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
G
A
I
Q45VR2CVQ
Q45VR2CV4
Q45VR2CV4Q
5-Pin Mini-style QD
N
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
1
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
DISTANCE
DISTANCE
5-wire 2 m (6.5 ꢂ)
1000
Q45CV4
Convergent Mode
cable
E
Q45CV4
Convergent Mode
3.8 mm
0.15 in
X
C
E
S
S
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
100
10
100 mm (4 in) Spot
Size at Focus: 1.5 mm
(0.06 in)
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
G
A
I
5-Pin Mini-style QD
N
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
1
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
DISTANCE
DISTANCE
To order the 9 m (30 ꢂ) cable models, add the suffix "W/30" to the cabled model number. (For example: Q45VR2CV W/30.) Models with
a quick disconnect (QD) connector require a maꢀng cable.
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36339 Rev. H
Q45VR2 Series Sensors
Glass Fiber Opꢀc Models
These models are an excellent choice for glass fiber opꢀc applicaꢀons where faster sensor response is not important.
Their high excess gain means that opposed individual fibers can operate reliably in many very hosꢀle environments.
Also, special miniature bifurcated fiber opꢀc assemblies with bundle sizes as small as 0.5 mm (.020 in) dia. may be used
successfully for diffuse-mode sensing when using sensor model Q45VR2F(Q). For more informaꢀon on compaꢀble glass
fiber opꢀcs, refer to your current catalog.
GLASS FIBER
Diffuse mode performance curves are based on a 90% reꢁectance white test card.
Range: Range varies by sensing mode and fiber opꢀcs used.
Output Type: SPDT Electro-mechanical relay
Infrared, 880 nm and
Visible red, 650 nm
Infrared, 880 nm
Models
Cable
Excess Gain
Beam Paꢁern
1000
100
10
Q45VR2F
5-wire 2 m (6.5 ꢂ) cable
Q45F
E
X
C
E
S
S
Opposed Mode
IT23S Fibers
Q45F
6.0 in
150 mm
Opposed Mode
100 mm
50 mm
0
4.0 in
IT23S Fibers
2.0 in
0
IT13S Fibers
G
A
I
IT13S Fibers
50 mm
100 mm
150 mm
2.0 in
4.0 in
6.0 in
N
1
0
0.4 m
15 in
0.8 m
30 in
1.2 m
45 in
1.6 m
60 in
2.0 m
75 in
0.01 m
0.03 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
Q45VR2FQ
5-Pin Mini-style QD
1000
Q45F
3.8 mm
0.15 in
Q45F
Diffuse Mode
E
X
C
E
S
S
2.5 mm
1.3 mm
0
0.10 in
0.05 in
0
BT13S Fiber
Diffuse Mode
100
10
BT23S Fiber
1.3 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
BT23S Fiber
G
A
I
0
25 mm
1 in
50 mm
2 in
75 mm 100 mm 125 mm
3 in 4 in 5 in
BT13S Fiber
N
DISTANCE
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
DISTANCE
Visible Red, 650 nm
Excess Gain
Models
Cable
Beam Paꢁern
1000
100
10
Q45VR2FV
5-wire 2 m (6.5 ꢂ) cable
Q45FV
Opposed Mode
E
X
C
E
S
S
Q45FV
Opposed Mode
30 mm
1.2 in
20 mm
10 mm
0
0.8 in
0.4 in
0
IT23S Fibers
IT23S Fibers
G
A
I
IT13S Fibers
10 mm
20 mm
30 mm
0.4 in
0.8 in
1.2 in
IT13S Fibers
N
1
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
0
100 mm 150 mm 200 mm 250 mm 300 mm
4 in
6 in
8 in
10 in
12 in
DISTANCE
DISTANCE
1000
Q45VR2FVQ
5-Pin Mini-style QD
Q45FV
Q45FV
Diffuse Mode
3.0 mm
0.12 in
E
X
C
E
S
S
Diffuse Mode
2.0 mm
1.0 mm
0
0.08 in
0.04 in
0
100
10
BT13S Fiber
1.0 mm
2.0 mm
3.0 mm
0.04 in
0.08 in
0.12 in
BT23S Fiber
G
A
I
BT13S
Fiber
0
5 mm
0.2 in
10 mm
0.4 in
15 mm
0.6 in
20 mm 25 mm
0.8 in 1.0 in
BT23S Fiber
N
DISTANCE
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
DISTANCE
P/N 36339 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
5
Q45VR2 Series Sensors
Plasꢀc Fiber Opꢀc Models
Lower in cost than glass fiber opꢀcs, plasꢀc fiber opꢀcs are ideal for use in situaꢀons where environmental condiꢀons
allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the field, and are available
in a variety of sensing end styles. For more informaꢀon on compaꢀble plasꢀc fiber opꢀcs, refer to your current catalog.
Diffuse mode performance curves are based on a 90% reꢁectance white test card.
Range: Range varies by sensing mode and fiber opꢀcs used.
Output Type: SPDT Electro-mechanical relay
PLASTIC FIBER
Visible red, 660 nm
Models
Cable
Excess Gain
Beam Paꢁern
1000
100
10
Q45VR2FP
5-wire 2 m (6.5 ꢂ) cable
Q45FP
E
X
C
E
S
S
Opposed Mode
Q45FP
Opposed Mode
45 mm
1.8 in
30 mm
15 mm
0
1.2 in
0.6 in
0
PIT46U Fibers
PIT46U Fibers
G
A
I
PIT26U Fibers
15 mm
30 mm
45 mm
0.6 in
1.2 in
1.8 in
PIT26U Fibers
N
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
25 mm
1.0 in
50 mm
2.0 in
75 mm 100 mm 125 mm
3.0 in 4.0 in 5.0 in
DISTANCE
DISTANCE
1000
Q45VR2FPQ
5-Pin Mini-style QD
Q45FP
18 mm
0.75 in
Q45FP
E
X
C
E
S
S
Diffuse Mode
12 mm
6 mm
0
0.50 in
0.25 in
0
Diffuse Mode
PBT46U Fiber
PBT46U Fiber
100
10
6 mm
12 mm
18 mm
0.25 in
0.50 in
0.75 in
G
A
I
0
10 mm
0.4 in
20 mm
0.8 in
30 mm
1.2 in
40 mm 50 mm
1.6 in 2.0 in
N
PBT26U Fiber
DISTANCE
1
0.1 mm
0.004 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
DISTANCE
To order the 9 m (30 ꢂ) cable models, add the suffix "W/30" to the cabled model number. (For example: Q45VR2FP W/30.) Models with
a quick disconnect (QD) connector require a maꢀng cable.
Overview
Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-ring-sealed
polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate selecꢀon and the
sensiꢀvity adjustment.
•
•
The power indicator (green) lights when power is applied to the sensor.
The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proporꢀonal to the
2
™
strength of the received light signal; this is the AID Alignment Indicaꢀng Device .
•
The output indicator (amber) lights when the sensor’s output is conducꢀng. This indicator is especially useful when a ꢀming
logic module is used and signal and output condiꢀons are not concurrent.
1. Sensiꢀvity adjustment
2. LEDs
6
5
•
•
•
Green LED: Power on indicator
Red LED: Signal indicator
Amber LED: Output status indicator
1
3. Opꢀonal LED signal strength display
4. Opꢀonal ꢀming adjustment
5. Opꢀonal ꢀming adjustment
6. Light/dark operate switch
2
3
4
2
US patent no. 4356393
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36339 Rev. H
Q45VR2 Series Sensors
Speciꢅcaꢀons
Supply Voltage and Current
Repeatability
Opposed mode: 0.25 milliseconds
90 to 250 V ac (50/60 Hz)
Average current 20 mA
Peak current 500 mA at 120 V ac, 750 mA at 250 V ac
All other sensing modes: 0.5 milliseconds
Response ꢀme and repeatability specificaꢀons are independent of signal
strength.
Supply Protecꢀon Circuitry
Adjustments
Protected against transient voltages
Light/Dark Operate select switch and mulꢀ-turn Sensiꢀvity control (allows
Output Conꢅguraꢀon
precise sensiꢀvity seꢃng – turn clockwise to increase gain).
SPDT (Single-Pole Double-Throw) electromechanical relay output. All models
except emiꢄers.
Opꢀonal logic and logic/display modules have adjustable ꢀming funcꢀons.
Indicators
Output Raꢀng
®
Indicator LEDs are clearly visible beneath a raised transparent Lexan dome on
Max. switching power (resisꢀve load): 150 W, 600 VA
Max. switching voltage (resisꢀve load): 250 V ac, 30 V dc
Max. switching current (resisꢀve load): 5 A at 250 V ac
Min. voltage and current: 5 V dc, 0.1 mA
Mechanical life of relay: 10,000,000 operaꢀons
Electrical life of relay at full resisꢀve load: 100,000 operaꢀons
top of the sensor
Power (green) LED lights when 90 to 250 V ac power is applied
™
Signal (red) AID System LED lights when the sensor sees its modulated light
source and pulses at a rate proporꢀonal to the strength of the received light
signal
Load (amber) LED lights whenever the output relay is energized
Opꢀonal 7-element LED signal strength display modules
Output Protecꢀon Circuitry
Construcꢀon
Protected against false pulse on power-up
Molded reinforced thermoplasꢀc polyester housing, o-ring-sealed transparent
polycarbonate cover, molded acrylic lenses, and stainless steel hardware. Q45s
are designed to withstand 1200 psi washdown.
Output Response Time
15 milliseconds ON and OFF
The base of cabled models has a 1/2-inch NPS integral internal conduit thread.
Note: 100 millisecond delay on power-up. Output
is de-energized during this ꢀme
Connecꢀons
PVC-jacketed 2-wire (emiꢄers) or 5-wire (all others) 2 m (6.5 ꢂ) or 9 m (30 ꢂ)
unterminated cables, or 3-pin (emiꢄers) or 5-pin (all others) Mini-style quick-
disconnect (QD) fiꢃngs are available (“Q” - suffix models).
QD cables are ordered separately.
Required Overcurrent Protecꢀon
WARNING: Electrical connecꢀons must be made
by qualified personnel in accordance with local
and naꢀonal electrical codes and regulaꢀons.
Applicaꢀon Notes
Transient suppression is recommended for contacts switching inducꢀve loads.
Opꢀonal output ꢀming modules are available.
Overcurrent protecꢀon is required to be provided by end product applicaꢀon
per the supplied table.
Environmental Raꢀng
Overcurrent protecꢀon may be provided with external fusing or via Current
Limiꢀng, Class 2 Power Supply.
NEMA 6P, IEC IP67
Supply wiring leads < 24 AWG shall not be spliced.
For addiꢀonal product support, go to www.bannerengineering.com.
Operaꢀng Condiꢀons
Temperature: −40 °C to +70 °C (−40 °F to +158 °F)
Maximum relaꢀve humidity: 90% at 50 °C (non-condensing)
Supply Wiring (AWG)
Required Overcurrent Protecꢀon (Amps)
Cerꢀꢅcaꢀons
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
P/N 36339 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
7
Q45VR2 Series Sensors
Dimensions
Opposed, Retro, and Diꢂuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)
Cabled Models
Quick-Disconnect Models
Transparent Cover (Gasketed)
View: Output Load Status
Open to Access: Sensitivity (Gain)
Adjustment
54.1 mm
(2.13")
44.5 mm
(1.75")
Lens Centerline
50.8 mm
(2.00")
69.0 mm
(2.72")
6.4 mm (0.25")
87.6 mm
(3.45")
4.5 mm (#10) Screw
Clearance (2)
7.1 mm
(0.28")
30.0 mm
(1.18")
Internal Thread
(1/2–14NPSM)
ø 6.1 (0.24")
2m (6.5') Cable
External Thread
M30 X 1.5
External thread (M30 x 1.5)
hex nut supplied
14 mm (0.6")
Mini-style QD Connector
Convergent Sensor Models
(CV and CV4)
Glass Fiber Opꢀc Models
Plasꢀc Fiber Opꢀc Models
(FP)
(F and FV)
60.5 mm
(2.38")
61.7 mm
(2.43")
59.9 mm
(2.36")
8
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36339 Rev. H
Q45VR2 Series Sensors
Wiring Diagrams
Sensors with Aꢁached Cable
Sensors with Quick-Disconnect 5-Pin Mini-Style (model
suffix Q)
brown
brown
90–250 V ac
blue
90–250 V ac
blue
white
yellow
white
yellow
NC
C
NC
C
black
black
NO
NO
Q452E Emiꢁer with Aꢁached Cable
Q452E Emiꢁer with Quick-Disconnect 3-Pin Mini-Style
(model suffix Q)
brown
brown
90–250 V ac
blue
90–250 V ac
blue
black
Accessories
3-Pin Mini-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MBCC-306
1.83 m (6.5 ꢂ)
3.66 m (12 ꢂ)
9.14 m (30 ꢂ)
1.83 m (6.5 ꢂ)
3.66 m (12 ꢂ)
9.14 m (30 ꢂ)
1.83 m (6.5 ꢂ)
1
MBCC-312
Straight
MBCC-330
2
52 Typ.
3
7/8-16UN-2B
ø 25.5
SMICC-306
1 = Black
2 = Brown
3 = Blue
SMICC-312
Straight
Straight
SMICC-330
SM30CC-306
1 = Red/Black
2 = Red/White
3 = Green
SM30CC-312
3.66 m (12 ꢂ)
5-Pin Mini-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MBCC-506
1.83 m (6 ꢂ)
3.66 m (12 ꢂ)
1
2
5
MBCC-512
52 Typ.
7/8-16UN-2B
ø 25.5
4
3
Straight
1 = Black
2 = Blue
MBCC-530
9.14 m (30 ꢂ)
3 = Yellow
4 = Brown
5 = White
P/N 36339 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
9
Q45VR2 Series Sensors
Retroreꢃecꢀve Targets
Banner offers a wide selecꢀon of high-quality retroreꢁecꢀve targets. See
www.bannerengineering.com for complete informaꢀon.
Note: Polarized sensors require corner cube type
retroreꢁecꢀve targets. Non-polarized sensors may use any
retroreꢁecꢀve target.
Brackets
56
SMB30C
SMB30MM
57
70
•
•
•
30 mm split clamp, black PBT
bracket
Stainless steel mounꢀng
hardware included
Mounꢀng hole for 30 mm
•
12-ga. stainless steel bracket
A
B
with curved mounꢀng slots for
66
13
versaꢀle orientaꢀon
Clearance for M6 (¼ in)
hardware
Mounꢀng hole for 30 mm
sensor
C
57
•
•
B
A
sensor
Hole center spacing: A=ø 45
Hole size: B=ø 27.2
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
67
SMB30SC
•
•
•
Swivel bracket with 30 mm
B
mounꢀng hole for sensor
58
Black reinforced thermoplasꢀc
polyester
Stainless steel mounꢀng and
swivel locking hardware
included
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Output Timing Logic and Signal Strength Display Modules
Q45 sensors easily accept the addiꢀon of output ꢀming logic and signal strength display funcꢀons. Display modules have a seven-
™
element display that gives a more precise indicaꢀon of excess gain than does the AID system LED that is standard on Q45 sensors. The
modules listed below may be used with all Q45VR2 sensors. Refer to the module's datasheet for more informaꢀon.
Models
45LM58
45LM58D
45LMD
Logic and/or Display Funcꢀon
Programmable output ꢀming logic
Programmable output ꢀming logic plus signal strength display
Signal strength display only (no ꢀming funcꢀon)
10
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36339 Rev. H
Q45VR2 Series Sensors
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY
OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the
product is idenꢀfied as not intended for such purposes will void the product warranty. Any modificaꢀons to this product without prior express approval by Banner Engineering Corp will void the
product warranꢀes. All specificaꢀons published in this document are subject to change; Banner reserves the right to modify product specificaꢀons or update documentaꢀon at any ꢀme.
Specificaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:
www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明