Q45BW22RQ1 [BANNER]
Q45BW22 Series Sensors;型号: | Q45BW22RQ1 |
厂家: | Banner Engineering |
描述: | Q45BW22 Series Sensors |
文件: | 总11页 (文件大小:627K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Q45BW22 Series Sensors
Datasheet
90 V ac to 250 V ac photoelectric sensors with protected solid-state relay output
•
Advanced one-piece photoelectric sensors with outstanding optical performance and
extremely rugged design
•
•
•
90 V ac to 250 V ac
Protected solid-state relay output; 300 mA max. load at up to 250 V ac
Multiple sensing modes include: opposed, diffuse, retroreflective and convergent, plus
glass and plastic fiber optic models
•
•
•
•
Selectable light/dark operate
Versatile plug-in modules available for output timing logic and/or signal strength display
Highly visible Power, Signal (AID System ), and Output indicator LEDs
Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, plus Mini-style or
Micro-style quick-disconnect fittings
1
™
•
•
Versatile mounting options
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
To order the 9 m (30 ft) cable model, add the suffix "W/30" to the cabled model number. For example Q452E W/30.
A model with a QD connector requires a mating cable.
Opposed-Mode Emitter (E) and Receiver (R) Models
Because of their extremely high excess gain, these opposed-mode sensors are an excellent option
for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.
OPPOSED
Infrared, 880 nm
Models
Q452E Emitter
Range
Cable
Supply Voltage
Output Type
2-wire 2m (6.5 ft)
3-wire 2m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
3-Pin Mini-style QD
4-Pin Micro-style QD
Q45BW22R Receiver
Q452EQ Emitter
60 m (200 ft)
90 V ac to 250V ac
SPST Solidstate Relay
Q452EQ1 Emitter
Q45BW22RQ Receiver
Q45BW22RQ1 Receiver
1
U.S. Patent no. 4356393
Original Document
37209 Rev. F
2 November 2016
37209
Q45BW22 Series Sensors
Retroreflective-Mode Models
The visible red sensing beam of these sensors makes them very easy to align.
Model Q45BW22LP polarizes the emitted light and filters out unwanted reflections,
making sensing possible in applications otherwise considered unsuited to
retroreflective sensing. Performance is specified using the model BRT-3 3-inch
reflector (go to www.bannerengineering.com for more information).
P
RETRO
POLAR RETRO
Visible red, 680 nm
Non-Polarized Models
Models
Q45BW22LV
Q45BW22LVQ
Q45BW22LVQ1
Range
Cable
Supply Voltage
Output Type
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
0.08 to 9 m
(3 in to 30 ft)
90 V ac to 250 V ac
SPST Solid-state Relay
Polarized Models
Cable
Models
Q45BW22LP
Q45BW22LPQ
Q45BW22LPQ1
Range
Supply Voltage
Output Type
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
0.15 to 6 m
(6 in to 20 in)
90 V ac to 250 V ac
SPST Solid-state Relay
Diffuse-Mode Models
These diffuse-mode models detect objects by sensing the reflection of their own emitted
light. Ideal for use when the reflectivity and profile of the object to be sensed are sufficient
to return a large percentage of emitted light back to the sensor. Model Q45BW22DX is the
first choice for diffuse-mode applications when there are no background objects to falsely
return light.
DIFFUSE
Infrared, 880 nm
Short Range
Model
Range
Cable
Supply Voltage
Output Type
Q45BW22D
Q45BW22DQ
Q45BW22DQ1
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
45 cm (18 in)
SPST Solid-state Relay
90 V ac to 250 V ac
Long Range
Cable
Model
Range
Supply Voltage
Output Type
Q45BW22DL
Q45BW22DLQ
Q45BW22DLQ1
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
1. 8 m (6 ft)
SPST Solid-state Relay
90 V ac to 250 V ac
High Power
Cable
Model
Range
Supply Voltage
Output Type
Q45BW22DX
Q45BW22DXQ
Q45BW22DXQ1
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
3 m (10 ft)
SPST Solid-state Relay
90 V ac to 250 V ac
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 37209 Rev. F
Q45BW22 Series Sensors
Convergent-Mode Models
These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately
sense the position of parts approaching from the side. Ignores all but highly reflective objects
that are outside of the sensing range.
CONVERGENT
Visible red, 680 nm
Models
Q45BW22CV
Focus
Cable
Supply Voltage
Output Type
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
38 mm (1.5 in)
Q45BW22CVQ
Q45BW22CVQ1
Q45BW22CV4
Q45BW22CV4Q
Q45BW22CV4Q1
90 V ac to 250 V ac
SPST Solid-state Relay
Spot Size at Focus:
1.3 mm (0.05 in)
100 mm (4 in)
90 V ac to 250 V ac
SPST Solid-state Relay
Spot Size at Focus:
1.5 mm (0.06 in)
Glass Fiber-Optic Models
These models are an excellent choice for glass fiber optic applications
where faster sensor response is not important. Their high excess gain
means that opposed individual fibers can operate reliably in many very
hostile environments. Also, special miniature bifurcated fiber optic
assemblies with bundle sizes as small as .5 mm (.020 in) dia. may be
used successfully for diffuse-mode sensing when using sensor model
Q45BW22F(Q). For more information on compatible glass fiber optics,
go to www.bannerengineering.com.
GLASS FIBER
GLASS FIBER
Infrared, 880 nm and Visible red, 650 nm
Infrared, 880 nm
Models
Q45BW22F
Range
Cable
Supply Voltage
Output Type
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
Range varies by
sensing mode and
fiber optics used
Q45BW22FQ
90 V ac to 250 V ac
SPST Solid-state Relay
Q45BW22FQ1
Visible red, 650 nm
Cable
Models
Q45BW22FV
Range
Supply Voltage
Output Type
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
Range varies by
sensing mode and
fiber optics used
Q45BW22FVQ
Q45BW22FVQ1
90 V ac to 250 V ac
SPST Solid-state Relay
Plastic Fiber-Optic Models
Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where
environmental conditions allow (for example, low levels of acids, alkalis, and solvents). Most are
easily cut to length in the field, and are available in a variety of sensing end styles. For more
information on compatible plastic fiber optics, go to www.bannerengineering.com.
PLASTIC FIBER
Visible red, 660 nm
Model
Q45BW22FP
Range
Cable
Supply Voltage
Output Type
3-wire 2 m (6.5 ft)
3-Pin Mini-style QD
4-Pin Micro-style QD
Range varies by
sensing mode and
fiber optics used
Q45BW22FPQ
Q45BW22FPQ1
90 V ac to 250 V ac
SPST Solid-state Relay
P/N 37209 Rev. F
www.bannerengineering.com - Tel: +1-763-544-3164
3
Q45BW22 Series Sensors
Overview
Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-
ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate
selection and the sensitivity adjustment.
•
•
The power indicator (green) lights when power is applied to the sensor.
The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional
2
™
to the strength of the received light signal; this is the AID Alignment Indicating Device .
•
The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when
a timing logic module is used and signal and output conditions are not concurrent.
1. LEDs
•
•
•
Green LED: Power on indicator
Red LED: Signal indicator
Amber LED: Output status indicator
5
4
2. Optional LED signal strength display
3. Optional timing adjustment
4. Optional timing adjustment
5. Light/dark operate switch
1
2
3
Wiring Diagram
Attached Cable
Emitter with Attached Cable
1
3
4
1
+
90-250V ac
–
90–250 V ac
3
Load
Key
1 = Brown
Quick-Disconnect 3-Pin Mini-Style
(model suffix Q)
Emitter with Quick-Disconnect 3-Pin
Mini-Style (model suffix Q)
3 = Blue
4 = Black
1
3
–
90–250 V ac
3
90-250V ac
4
1
+
Quick-Disconnect 4-Pin Micro-Style
(model suffix Q1)
Emitter with Quick-Disconnect 4-Pin
Micro-Style (model suffix Q1)
Key
1
1
1 = Red and black
2 = Red and white
3 = Red
90-250V ac
2
90-250V ac
2
3
3
4
Load
4 = Green
4
2
US patent no. 4356393
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 37209 Rev. F
Q45BW22 Series Sensors
Specifications
Supply Voltage and Current
Repeatability
90 V ac to 250V ac (50 to 60 Hz)
Average current: 20 mA
Peak current: 500 mA at 120 V ac, 750 mA at 250 V ac
Opposed mode: 0.25 milliseconds
All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of
signal strength.
Supply Protection Circuitry
Adjustments
Protected against transient voltages
Located under the sensor’s transparent cover: Light/Dark Operate
select switch; and multi-turn Sensitivity control (allows precise
sensitivity setting—turn clockwise to increase gain). Optional logic and
logic/display modules have adjustable timing functions.
Output Configuration
Short circuit/overload protected FET solid-state relay
Output Rating
Continuous current: 300 mA max. to 50 °C (derate to 200 mA at
70 °C, 5 mA/°C)
Inrush current: 3 A maximum for 100 milliseconds, 5 A maximum for 1
millisecond
Off-state leakage current: <100 microamps
Saturation voltage: <3 V at 200 mA
Indicators
Indicator LEDs are clearly visible beneath a raised transparent
polycarbonate dome on top of the sensor.
Power (green) LED: Lights whenever 90 V ac to 250 V ac power is
applied, and flashes to indicate output overload or output short circuit
™
Signal (red) AID System LED: Lights whenever the sensor sees its
Output Protection Circuitry
modulated light source, and pulses at a rate proportional to the
strength of the received light signal
Load (amber) LED: Lights whenever the output relay is energized
Optional 7-element LED: Signal strength display module
Manually-resettable output latch-out trips in the event of an output
overload or short circuit condition. The green Power LED flashes to
indicate the latch-out. To reset the output, remove power to the sensor
and load for 5 seconds, then restore power.
Construction
Output Response Time
Molded reinforced thermoplastic polyester housing, o-ring-sealed
transparent polycarbonate cover, molded acrylic lenses, and stainless
steel hardware. Q45s are designed to withstand 1200 psi washdown.
The base of cabled models has a 1/2-in NPS integral internal conduit
thread.
Opposed mode: 2 milliseconds ON, 1 millisecond OFF
All other sensing modes: 2 milliseconds ON/OFF
NOTE: 100 millisecond delay on power-up.
Output is non-conducting during this time.
Environmental Rating
NEMA 6P, IEC IP67
Required Overcurrent Protection
Connections
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
PVC-jacketed 2 m (6.5 ft) or 9 m (30 ft) cables, or 3-pin Mini-style (“Q”
suffix models) or 4-pin Micro-style (“Q1” suffix models) quick-
disconnect (QD) fittings are available. QD cables are ordered
separately.
Operating Conditions
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Temperature: −40 °C to +70 °C (−40 °F to +158 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Application Notes
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Optional output timing modules are available.
Certifications
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
P/N 37209 Rev. F
www.bannerengineering.com - Tel: +1-763-544-3164
5
Q45BW22 Series Sensors
Dimensions
Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)
Cabled Models
Mini-Style Quick-Disconnect
Models
Micro-Style Quick Disconnect
Models
54.1 mm*
(2.13")
*57.9 mm (2.28") for LP models
Lens Centerline
44.5 mm
(1.75")
50.8 mm
(2.00")
69.0 mm
(2.72")
6.4 mm (0.25")
87.6 mm
(3.45")
4.5 mm (#10) Screw
Clearance (2)
7.1 mm
(0.28")
30.0 mm
(1.18")
Internal Thread
(1/2–14NPSM)
ø 6.1 (0.24")
External Thread
M30 X 1.5
2m (6.5') Cable
External thread (M30 x 1.5)
hex nut supplied
Micro-style
15 mm (0.6")
14 mm (0.6")
QD Connector
Mini-style QD Connector
Convergent Sensor Models
(CV and CV4)
Glass Fiber Optic Models
(F and FV)
Plastic Fiber Optic Models
(FP)
60.5 mm
(2.38")
61.7 mm
(2.43")
59.9 mm
(2.36")
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 37209 Rev. F
Q45BW22 Series Sensors
Performance Curves
Opposed
Excess Gain
Beam Pattern
Effective Beam: 13 mm
1000
Q45E/R
Opposed Mode
E
X
C
E
S
S
Q45E/R
Opposed Mode
1.5 m
60 in
1.0 m
0.5 m
0
40 in
20 in
0
100
10
0.5 m
1.0 m
1.5 m
20 in
40 in
60 in
G
A
I
N
1
0
12 m
40 ft
24 m
80 ft
36 m
120 ft
48 m
160 ft
60 m
200 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
DISTANCE
DISTANCE
Retroreflective Non-Polarized
Excess Gain Beam Pattern
Retroreflective Polarized
Excess Gain Beam Pattern
1000
1000
Q45LP
Q45LV
E
X
C
E
S
S
E
X
C
E
S
S
Q45LV
Retroreflective Mode
Q45LP
Retroreflective
Mode
75 mm
3.0 in
75 mm
3.0 in
Retroreflective Mode
Retroreflective Mode
100
10
100
10
50 mm
25 mm
0
2.0 in
1.0 in
0
50 mm
25 mm
0
2.0 in
1.0 in
0
With BRT-3 Reflector
With BRT-3 Reflector
G
A
I
With BRT-3 Reflector
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
With BRT-3 Reflector
N
N
1
1
0
1.5 m
5 ft
3 m
10 ft
4.5 m
15 ft
6 m
7.5 m
25 ft
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
3 m
10 ft
6 m
20 ft
9 m
30 ft
12 m
40 ft
15 m
50 ft
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
20 ft
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Diffuse-mode performance curves are based on a 90% reflectance white test card.
Diffuse Short Range
Diffuse Long Range
Excess Gain
Beam Pattern
Excess Gain
Beam Pattern
1000
1000
100
10
Q45DL
Q45D
E
X
C
E
S
S
E
X
C
E
S
S
Q45DL
Diffuse Mode
15 mm
0.6 in
75 mm
3.0 in
Diffuse Mode
Diffuse Mode
Q45D
Diffuse Mode
100
10
10 mm
5 mm
0
0.4 in
0.2 in
0
50 mm
25 mm
0
2.0 in
1.0 in
0
5 mm
10 mm
15 mm
0.2 in
0.4 in
0.6 in
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
G
A
I
N
N
1
1
0
100 mm 200mm 300 mm 400 mm 500 mm
4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
DISTANCE
DISTANCE
P/N 37209 Rev. F
www.bannerengineering.com - Tel: +1-763-544-3164
7
Q45BW22 Series Sensors
Diffuse High Power
Excess Gain
Beam Pattern
1000
100
10
Q45DX
E
X
C
E
S
S
Q45DX
Diffuse Mode
Diffuse Mode
75 mm
3.0 in
50 mm
25 mm
0
2.0 in
1.0 in
0
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
N
1
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
0.01 m
0.033 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
Convergent mode performance curves are based on a 90% reflectance white test card.
Convergent (CV and CVQ Models)
Excess Gain Beam Pattern
Convergent (CV4 and CV4Q Models)
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45CV
Q45CV4
Convergent Mode
E
X
C
E
S
S
E
X
C
E
S
S
Q45CV4
Convergent Mode
Q45CV
3.8 mm
0.15 in
3.8 mm
0.15 in
Convergent Mode
Convergent Mode
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
G
A
I
G
A
I
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
N
N
1
1
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Glass fiber optic diffuse mode performance curves are based on a 90% reflectance white test card.
Glass Fiber Optic, Infrared (Opposed Mode)
Excess Gain Beam Pattern
Glass Fiber Optic, Infrared (Diffuse Mode)
Excess Gain Beam Pattern
1000
100
10
1000
100
10
Q45F
Q45F
Diffuse Mode
E
X
C
E
S
S
E
X
C
E
S
S
Opposed Mode
Q45F
Opposed Mode
Q45F
Diffuse Mode
150 mm
6.0 in
3.8 mm
0.15 in
100 mm
50 mm
0
4.0 in
2.0 in
0
2.5 mm
1.3 mm
0
0.10 in
0.05 in
0
IT23S Fibers
BT13S Fiber
IT23S Fibers
IT13S Fibers
BT23S Fiber
BT23S Fiber
G
A
I
50 mm
100 mm
150 mm
2.0 in
4.0 in
6.0 in
G
A
I
1.3 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
IT13S Fibers
BT13S Fiber
N
N
1
1
0
0.4 m
15 in
0.8 m
30 in
1.2 m
45 in
1.6 m
60 in
2.0 m
75 in
0
25 mm
1 in
50 mm
2 in
75 mm 100 mm 125 mm
3 in 4 in 5 in
0.01 m
0.03 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
8
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 37209 Rev. F
Q45BW22 Series Sensors
Glass Fiber Optic, Visible Red (Opposed Mode)
Glass Fiber Optic, Visible Red (Diffuse Mode)
Excess Gain Beam Pattern
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45FV
Diffuse Mode
Q45FV
E
X
C
E
S
S
E
X
C
E
S
S
Q45FV
Opposed Mode
Q45FV
Diffuse Mode
30 mm
1.2 in
Opposed Mode
3.0 mm
0.12 in
20 mm
10 mm
0
0.8 in
0.4 in
0
2.0 mm
1.0 mm
0
0.08 in
0.04 in
0
IT23S Fibers
IT23S Fibers
BT13S Fiber
10 mm
20 mm
30 mm
0.4 in
0.8 in
1.2 in
G
A
I
IT13S Fibers
1.0 mm
2.0 mm
3.0 mm
0.04 in
0.08 in
0.12 in
G
A
I
BT13S
Fiber
IT13S Fibers
BT23S Fiber
BT23S Fiber
N
N
1
1
0
100 mm 150 mm 200 mm 250 mm 300 mm
4 in 6 in 8 in 10 in 12 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
5 mm
0.2 in
10 mm
0.4 in
15 mm
0.6 in
20 mm 25 mm
0.8 in 1.0 in
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Plastic fiber optic Diffuse mode performance curves are based on a 90% reflectance white test card.
Plastic Fiber Optic (Opposed Mode) Plastic Fiber Optic (Diffuse Mode)
Excess Gain
Beam Pattern
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45FP
Q45FP
E
X
C
E
S
S
E
X
C
E
S
S
Q45FP
45 mm
1.8 in
Opposed Mode
Q45FP
18 mm
0.75 in
Diffuse Mode
PBT46U Fiber
Opposed Mode
PIT46U Fibers
Diffuse Mode
30 mm
15 mm
0
1.2 in
0.6 in
0
12 mm
6 mm
0
0.50 in
0.25 in
0
PBT46U Fiber
PIT46U Fibers
PIT26U Fibers
G
A
I
15 mm
30 mm
45 mm
0.6 in
1.2 in
1.8 in
6 mm
12 mm
18 mm
0.25 in
0.50 in
0.75 in
G
A
I
PIT26U Fibers
N
N
PBT26U Fiber
1
1
0
10 mm
0.4 in
20 mm
0.8 in
30 mm
1.2 in
40 mm 50 mm
1.6 in 2.0 in
0
25 mm
1.0 in
50 mm
2.0 in
75 mm 100 mm 125 mm
3.0 in 4.0 in 5.0 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0.1 mm
0.004 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Accessories
Cordsets
3-Pin Mini-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MBCC-306
1.83 m (6.5 ft)
3.66 m (12 ft)
1
52 Typ.
7/8-16UN-2B
ø 25.5
MBCC-312
2
3
Straight
1 = Black
2 = Brown
3 = Blue
MBCC-330
9.14 m (30 ft)
4-Pin Micro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQAC-406
1.83 m (6 ft)
4
3
MQAC-415
4.57 m (15 ft)
9.14 m (30 ft)
42 Typ.
1
2
Straight
1/2-20 UNF-28
1 = Red/Black
2 = Red/White
3 = Red
MQAC-430
ø 14.5
4 = Green
P/N 37209 Rev. F
www.bannerengineering.com - Tel: +1-763-544-3164
9
Q45BW22 Series Sensors
Retroreflective Targets
Banner offers a wide selection of high-quality retroreflective targets. See
www.bannerengineering.com for complete information.
NOTE: Polarized sensors require corner cube type
retroreflective targets. Non-polarized sensors may use
any retroreflective target.
Brackets
SMB30C
56
SMB30MM
•
30 mm split clamp, black
PBT bracket
•
12-ga. stainless steel bracket
57
70
A
B
with curved mounting slots
for versatile orientation
66
13
•
•
Stainless steel mounting
hardware included
C
57
•
•
Clearance for M6 (¼ in)
hardware
B
Mounting hole for 30 mm
sensor
A
Mounting hole for 30 mm
sensor
Hole center spacing: A=ø 45
Hole size: B=ø 27.2
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMB30SC
67
•
•
•
Swivel bracket with 30 mm
mounting hole for sensor
B
58
Black reinforced
thermoplastic polyester
Stainless steel mounting and
swivel locking hardware
included
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Output Timing Logic and Signal Strength Display Modules
Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a
™
seven-element display that gives a more precise indication of excess gain than does the AID system LED that is standard
on Q45 sensors. The modules listed below may be used with all Q45VR2 sensors. Refer to the module's datasheet for more
information.
Models
45LM58
45LM58D
45LMD
Logic and/or Display Function
Programmable output timing logic
Programmable output timing logic plus signal strength display
Signal strength display only (no timing function)
10
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 37209 Rev. F
Q45BW22 Series Sensors
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection
applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval
by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product
specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most
recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明