Q45BW13R_技术文档

Q45BW13 Series Sensors

Datasheet

Universal voltage photoelectric sensors with isolated solid-state output

•

Advanced one-piece photoelectric sensors with outstanding opꢀcal performance and

extremely rugged design

•

Universal supply voltage: 12 V dc to 250 V dc or 24 V ac to 250 V ac

Opto-isolated solid-state relay output; 300 mA max. load at up to 250 V ac, 250 V dc

Full line includes opposed, diﬀuse, retroreꢁecꢀve, convergent, and glass and plasꢀc ﬁber

opꢀc sensing modes

Selectable light/dark operate

•

Versaꢀle plug-in modules available for output ꢀming logic and/or signal strength display

1

™

Highly visible Power, Signal (AID System ), and Output indicator LEDs

Choice of prewired 2 m (6.5 ꢂ) or 9 m (30 ꢂ) unterminated cable or Mini-style quick-

disconnect ﬁꢃng

•

Versaꢀle mounꢀng opꢀons

Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 raꢀng

WARNING: Not To Be Used for Personnel Protecꢀon

Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or

death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel

safety applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output

condiꢀon.

Models

To order the 9 m (30 ꢂ) cable models, add the suﬃx "W/30" to the cabled model number. For example: Q453E W/30.

Models with a quick disconnect (QD) connector require a maꢀng cable.

Opposed Mode Emiꢁer (E) and Receiver (R) Models

Because of their extremely high excess gain, these opposed-mode sensors are an excellent opꢀon for sensing in

contaminated or dirty areas, and are also the best choice for long-range sensing.

OPPOSED

Infrared, 880 nm

Models

Range

Cable

Supply Voltage

Output Type

Q453E Emiꢁer

2-wire 2 m (6.5 ꢂ)

4-wire 2 m (6.5 ꢂ)

3-pin Mini QD

4-pin Mini QD

Universal 12 to 250 V dc

Q45BW13R Receiver

Q453EQ Emiꢁer

Q45BW13RQ Receiver

60 m (200 ꢂ)

Isolated SPST Solid-state Switch

or

24 to 250 V ac

Retroreꢂecꢀve Mode Models

The visible red sensing beam of these sensors makes them very easy to align. Model Q45BW13LP

polarizes the emiꢄed light and ﬁlters out unwanted reꢁecꢀons, making sensing possible in

applicaꢀons otherwise considered unsuited to retroreꢁecꢀve sensing. Performance is speciﬁed

using the model BRT-3 3-inch reꢁector (go to www.bannerengineering.com for more

informaꢀon).

P

RETRO

POLAR RETRO

Visible red, 680 nm

(non-polarized)

Visible red, 680 nm

(polarized)

Retroreꢁecꢀve range is speciﬁed using one model BRT-3 retroreꢁector (3-inch diameter). Actual sensing range may be more or less than

speciﬁed, depending upon the eﬃciency and reꢁecꢀve area of the retroreꢁector used.

1

U.S. Patent number 4356393

Original Document

53999 Rev. D

31 January 2017

53999

Q45BW13 Series Sensors

Non-Polarized

Cable

Models

Range

Supply Voltage

Output Type

Q45BW13LV

Q45BW13LVQ

4-wire 2 m (6.5 ꢂ)

Universal 12 to 250 V dc

0.08 to 9 m (3 in to 30

Isolated SPST Solid-state Switch

or

4-Pin Mini QD

ꢂ)

24 to 250V ac

Polarized

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13LP

Q45BW13LPQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

0.15 to 6 m (6 in to 20

Isolated SPST Solid-state Switch

or

ꢂ)

24 to 250 V ac

Diﬀuse Mode Models

These diﬀuse-mode models detect objects by sensing the reꢁecꢀon of their own emiꢄed light. Ideal for use when the

reꢁecꢀvity and proﬁle of the object to be sensed are suﬃcient to return a large percentage of emiꢄed light back to

the sensor. Model Q45BW13DX is the ﬁrst choice for diﬀuse-mode applicaꢀons when there are no background

objects to falsely return light.

DIFFUSE

Infrared, 880 nm

Short Range

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13D

Q45BW13DQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

450 mm (18 in)

Isolated SPST Solid-state Switch

or

24 to 250 V ac

Long Range

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13DL

Q45BW13DLQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

1. 8 m (6 ꢂ)

Isolated SPST Solid-state Switch

or

24 to 250 V ac

High Power

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13DX

Q45BW13DXQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

3 m (10 ꢂ)

Isolated SPST Solid-state Switch

or

24 to 250 V ac

Convergent Mode Models

These sensors are ideal for reꢁecꢀve sensing of very small parts or proﬁles, and can accurately sense the posiꢀon of

parts approaching from the side. Will ignore all but highly reꢁecꢀve objects that are outside the sensing range.

CONVERGENT

VISIBLE RED

Visible red, 680 nm

Output Type

Models

Focus

Cable

Supply Voltage

Q45BW13CV

Q45BW13CVQ

4-wire 2 m (6.5 ꢂ)

4-pin Mini QD

Universal 12 to 250 V dc

38 mm (1.5 in)

Isolated SPST Solid-state Switch

or

Spot Size at Focus: 1.3

mm (0.05 in)

24 to 250 V ac

2

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53999 Rev. D

Q45BW13 Series Sensors

Models

Focus

Cable

Supply Voltage

Output Type

Q45BW13CV4

Q45BW13CV4Q

4-wire 2 m (6.5 ꢂ)

4-pin Mini QD

Universal 12 to 250 V dc

100 mm (4 in)

Isolated SPST Solid-state Switch

or

Spot Size at Focus: 1.5

mm (0.06 in)

24 to 250 V ac

Glass Fiber-Opꢀc Models

These models are an excellent choice for glass ﬁber opꢀc applicaꢀons where faster sensor response is not important.

Their high excess gain means that opposed individual ﬁbers can operate reliably in many very hosꢀle environments.

Also, special miniature bifurcated ﬁber opꢀc assemblies with bundle sizes as small as .5 mm (.020 in) dia. may be used

successfully for diﬀuse-mode sensing when using sensor model Q45BW13F(Q). For more informaꢀon on compaꢀble

glass ﬁber opꢀcs, go to www.bannerengineering.com.

GLASS FIBER

Infrared, 880 nm and Visible

red, 650 nm

Infrared, 880 nm

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13F

Q45BW13FQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

Range varies by sensing

mode and ﬁber opꢀcs

used

Isolated SPST Solid-state Switch

or

24 to 250V ac

Visible red, 650 nm

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13FV

Q45BW13FVQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

Range varies by sensing

mode and ﬁber opꢀcs

used

Isolated SPST Solid-state Switch

or

24 to 250 V ac

Plasꢀc Fiber-Opꢀc Models

Lower in cost than glass ﬁber opꢀcs, plasꢀc ﬁber opꢀcs are ideal for use in situaꢀons where environmental condiꢀons

allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the ﬁeld, and are

available in a variety of sensing end styles. For more informaꢀon on compaꢀble plasꢀc ﬁber opꢀcs, go to

www.bannerengineering.com.

GLASS FIBER

Visible red, 660 nm

Models

Range

Cable

Supply Voltage

Output Type

Q45BW13FP

Q45BW13FPQ

4-wire 2 m (6.5 ꢂ)

4-Pin Mini QD

Universal 12 to 250 V dc

Range varies by sensing

mode and ﬁber opꢀcs

used

Isolated SPST Solid-state Switch

or

24 to 250V ac

Overview

Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-ring-sealed

polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate selecꢀon and the

sensiꢀvity adjustment.

•

The power indicator (green) lights when power is applied to the sensor.

The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proporꢀonal to the

2

™

strength of the received light signal; this is the AID Alignment Indicaꢀng Device .

•

The output indicator (amber) lights when the sensor’s output is conducꢀng. This indicator is especially useful when a ꢀming

logic module is used and signal and output condiꢀons are not concurrent.

2

US patent no. 4356393

P/N 53999 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

3

Q45BW13 Series Sensors

1. LEDs

5

4

•

Green LED: Power on indicator

Red LED: Signal indicator

Amber LED: Output status indicator

2. Opꢀonal LED signal strength display

3. Opꢀonal ꢀming adjustment

4. Opꢀonal ꢀming adjustment

5. Light/dark operate switch

1

2

3

Wiring Diagrams

Sensors with Aꢁached Cable and Sensors with Quick-Disconnect 4-Pin Mini (model suﬃx Q)

1

24-250V ac or 12-250V dc*

3

2

Isolated

Solid-state

SPST Switch

4

*NOTE: Connection of dc power is without regard to polarity.

Quick disconnect (QD) wiring diagrams are funcꢀonally idenꢀcal.

Emiꢁers with Aꢁached Cable

Emiꢁers with Quick-Disconnect 3-Pin Mini

brown

blue

brown

24–250 V ac or 12–250 V dc*

blue

black

*Connecꢀon of dc power is without regard to polarity.

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53999 Rev. D

Q45BW13 Series Sensors

Speciꢃcaꢀons

Supply Voltage and Current

Repeatability

Opposed mode: 0.25 milliseconds

Universal voltage: 24 to 250 V ac, 50/60 Hz or 12 to 250 V dc (1.5 waꢄs

maximum)

All other sensing modes: 0.5 milliseconds

Response ꢀme and repeatability speciﬁcaꢀons are independent of signal

strength.

Supply Protecꢀon Circuitry

Protected against transient voltages

DC wiring is without regard to polarity

Adjustments

Light/Dark Operate select switch; and mulꢀ-turn Sensiꢀvity control on top of

Output Conꢃguraꢀon

®

sensor beneath a transparent o-ring-sealed Lexan cover, allows precise

All models except emiꢄers: Opꢀcally isolated SPST solid-state switch

sensiꢀvity seꢃng (turn clockwise to increase gain). Opꢀonal logic and logic/

display modules have adjustable ꢀming funcꢀons

Output Raꢀng

250 V ac, 250 V dc, 300 mA

Indicators

®

Output saturaꢀon voltage: 3 V at 300 mA, 2 V at 15 mA

Oﬀ-state leakage current: <50 microamps

Inrush current: 1 amp for 20 milliseconds, non-repeꢀꢀve

Indicator LEDs are clearly visible beneath a raised transparent Lexan dome on

top of the sensor.

Power (green) LED lights whenever 24 to 250V ac, or 12 to 250V dc power is

applied

Output Protecꢀon Circuitry

™

Signal (red) AID System LED lights whenever the sensor sees its modulated

Protected against false pulse on power-up

light source, and pulses at a rate proporꢀonal to the strength of the received

light signal

Output Response Time

Load (amber) LED lights whenever the output relay is energized

Opꢀonal 7-element LED signal strength display module

Opposed mode: 2 milliseconds on, 1 millisecond oﬀ

All other sensing modes: 2 milliseconds on/oﬀ

Construcꢀon

Note: 100 millisecond delay on power-up. Output

is non-conducꢀng during this ꢀme.

Molded reinforced thermoplasꢀc polyester housing, o-ring-sealed transparent

polycarbonate cover, molded acrylic lenses, and stainless steel hardware. Q45s

are designed to withstand 1200 psi washdown. The base of cabled models has

a 1/20-in NPS integral internal conduit thread.

Required Overcurrent Protecꢀon

Environmental Raꢀng

WARNING: Electrical connecꢀons must be made

by qualiﬁed personnel in accordance with local

and naꢀonal electrical codes and regulaꢀons.

NEMA 6P, IEC IP67

Connecꢀons

2 m (6.5 ꢂ) unterminated PVC-jacketed cable or 9 m (30 ꢂ) unterminated PVC-

jacketed cable, or Mini quick-disconnect (QD) ﬁꢃngs are available (“Q”- suﬃx

models). QD cables are ordered separately.

Overcurrent protecꢀon is required to be provided by end product applicaꢀon

per the supplied table.

Overcurrent protecꢀon may be provided with external fusing or via Current

Limiꢀng, Class 2 Power Supply.

Operaꢀng Condiꢀons

Supply wiring leads < 24 AWG shall not be spliced.

For addiꢀonal product support, go to www.bannerengineering.com.

–25 °C to +55 °C (−13 °F to +131 °F)

90% at +50 °C maximum relaꢀve humidity (non-condensing)

Applicaꢀon Notes

Supply Wiring (AWG)

Required Overcurrent Protecꢀon (Amps)

Opꢀonal output ꢀming modules are available. See page 10 for more

20

22

24

26

28

30

5.0

3.0

2.0

1.0

0.8

0.5

informaꢀon.

Output is not short-circuit protected. Exercise care when making wiring

connecꢀons.

Cerꢀꢃcaꢀons

P/N 53999 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

5

Q45BW13 Series Sensors

Dimensions

Opposed, Retro, and Diﬀuse Sensing Modes (Model Suﬃx E, R, D, DL, DX, LP, and LV)

Cabled Models

Quick-Disconnect Models

54.1 mm

(2.13")

44.5 mm

(1.75")

Lens Centerline

50.8 mm

(2.00")

69.0 mm

(2.72")

6.4 mm (0.25")

87.6 mm

(3.45")

4.5 mm (#10) Screw

Clearance (2)

7.1 mm

(0.28")

30.0 mm

(1.18")

Internal Thread

(1/2–14NPSM)

ø 6.1 (0.24")

External Thread

M30 X 1.5

2m (6.5') Cable

External thread (M30 x 1.5)

hex nut supplied

14 mm (0.6")

Mini-style QD Connector

Convergent Sensor Models

(CV and CV4)

Glass Fiber Opꢀc Models

Plasꢀc Fiber Opꢀc Models

(FP)

(F and FV)

60.5 mm

(2.38")

61.7 mm

(2.43")

59.9 mm

(2.36")

6

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 53999 Rev. D

Q45BW13 Series Sensors

Accessories

Cordsets

3-Pin Mini-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MBCC-306

1.83 m (6.5 ꢂ)

3.66 m (12 ꢂ)

1

52 Typ.

7/8-16UN-2B

ø 25.5

MBCC-312

2

3

Straight

1 = Black

2 = Brown

3 = Blue

MBCC-330

9.14 m (30 ꢂ)

4-Pin Mini-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MBCC-406

1.83 m (6 ꢂ)

3.66 m (12 ꢂ)

4

3

2

1

MBCC-412

52 Typ.

7/8-16UN-2B

ø 25.5

Straight

1 = Brown

2 = White

3 = Blue

MBCC-430

9.14 m (30 ꢂ)

4 = Black

Retroreꢂecꢀve Targets

Banner oﬀers a wide selecꢀon of high-quality retroreꢁecꢀve targets. See

www.bannerengineering.com for complete informaꢀon.

Note: Polarized sensors require corner cube type

retroreꢁecꢀve targets. Non-polarized sensors may use any

retroreꢁecꢀve target.

Brackets

SMB30C

56

SMB30MM

•

12-ga. stainless steel bracket

with curved mounꢀng slots for

versaꢀle orientaꢀon

Clearance for M6 (¼ in)

hardware

Mounꢀng hole for 30 mm

sensor

•

30 mm split clamp, black PBT

bracket

Stainless steel mounꢀng

hardware included

Mounꢀng hole for 30 mm

57

70

A

B

66

13

•

C

•

57

B

sensor

A

Hole center spacing: A=ø 45

Hole size: B=ø 27.2

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

P/N 53999 Rev. D

www.bannerengineering.com - Tel: +1-763-544-3164

7

Q45BW13 Series Sensors

SMB30SC

67

•

Swivel bracket with 30 mm

mounꢀng hole for sensor

B

•

Black reinforced thermoplasꢀc

58

polyester

Stainless steel mounꢀng and

swivel locking hardware

included

29

A

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

Output Timing Logic and Signal Strength Display Modules

Q45 sensors easily accept the addiꢀon of output ꢀming logic and signal strength display funcꢀons. Display modules have a seven-

™

element display that gives a more precise indicaꢀon of excess gain than does the AID system LED that is standard on Q45 sensors. The

modules listed below may be used with all Q45BW13 sensors. Refer to the module's datasheet for more informaꢀon.

Models

45LM58

45LM58D

45LMD

Logic and/or Display Funcꢀon

Programmable output ꢀming logic

Programmable output ꢀming logic plus signal strength display

Signal strength display only (no ꢀming funcꢀon)

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the

product is idenꢀﬁed as not intended for such purposes will void the product warranty. Any modiﬁcaꢀons to this product without prior express approval by Banner Engineering Corp will void the

product warranꢀes. All speciﬁcaꢀons published in this document are subject to change; Banner reserves the right to modify product speciﬁcaꢀons or update documentaꢀon at any ꢀme.

Speciﬁcaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:

www.bannerengineering.com.

©


型号：	Q45BW13R
厂家：	Banner Engineering
描述：	Q45BW13 Series Sensors
文件：	总8页 (文件大小：325K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Q45BW13R [BANNER]

相关型号：

Q45BW13RQ

Q45BW22

Q45BW22CV

Q45BW22CV4

Q45BW22CV4Q

Q45BW22CV4Q1

Q45BW22CVQ

Q45BW22CVQ1

Q45BW22D

Q45BW22DL

Q45BW22DLQ

Q45BW22DLQ1