K30RBT2FGGHQP [BANNER]

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons;
K30RBT2FGGHQP
型号: K30RBT2FGGHQP
厂家: Banner Engineering    Banner Engineering
描述:

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons

文件: 总4页 (文件大小:326K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade  
Illuminated Buttons  
Datasheet  
Lighted touch button with bipolar outputs  
FDA-grade materials; rated to IEC IP67, IP68, and IP69K  
Laser marked information withstands aggressive cleaning procedures  
Excellent immunity to false triggering by water spray, detergents, oils, and other  
foreign materials  
Rugged, cost-effective, and easy-to-install touch button with multicolor light  
Momentary versions remain activated as long as touch is present  
Latching versions start up not activated and toggle between activated and not  
activated on successive touches  
Ergonomically designed to eliminate hand, wrist, and arm stresses associated with  
repeated switch operation; require no physical force to operate  
Can be actuated with bare hands or in gloves  
12 to 30 V dc operation  
Models  
Light (not  
activated)  
Light  
(activated)  
1
Model  
Function  
Output  
Connection  
K30ALBT2FXGHQP  
K30RLBT2FXGHQP  
K30ABT2FXGHQP  
K30RBT2FXGHQP  
K30ALBT2FGGHQP  
K30RLBT2FGGHQP  
K30ABT2FGGHQP  
K30RBT2FGGHQP  
K30ALBT2FRGHQP  
K30RLBT2FRGHQP  
K30ABT2FRGHQP  
K30RBT2FRGHQP  
Bipolar, N.O.  
Bipolar, N.C.  
Bipolar, N.O.  
Bipolar, N.C.  
Bipolar, N.O.  
Bipolar, N.C.  
Bipolar, N.O.  
Bipolar, N.C.  
Bipolar, N.O.  
Bipolar, N.C.  
Bipolar, N.O.  
Bipolar, N.C.  
Latching  
-
Green  
Green  
Green  
Momentary  
Latching  
150 mm (6 in) pigtail PVC  
cable with a 5-pin M12/  
Euro-style male, stainless  
steel, quick disconnect  
(QD)  
Green  
Momentary  
Latching  
Red  
Momentary  
Specifications  
Supply Voltage  
Output Rating  
Maximum Load: 150 mA  
12 to 30 V dc  
ON-state saturation voltage: < 2 V at 10 mA dc; < 2.5 V at 150 mA  
dc  
OFF-state leakage current: <10 µA at 30 V dc  
Supply Current  
55 mA max current (exclusive of load)  
Supply Protection Circuitry  
Output Response Time  
Protected against reverse polarity and transient voltages  
150 milliseconds ON and OFF  
Power-Up Delay  
300 milliseconds  
Latching models start up in a 'not activated' state  
1
To order the 2 m (6.5 ft) cable models, omit suffix QP from model number (example, K30ALBT2FXGH). A model with a QD requires a mating  
cable (see Cordsets on page 3).  
Original Document  
189833 Rev. C  
10 February 2016  
189833  
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade Illuminated Buttons  
Connections  
2 m (6.5 ft) PVC integral cable, or 150 mm (6 in) pigtail PVC cable  
Construction  
Base, dome, and nut: FDA-grade polycarbonate  
Mounting  
with a 5-pin M12/Euro-style male, stainless steel, quick disconnect  
(QD)  
M22 × 1.5 Threaded base, max torque 2.25 Nm (20 in-lbf)  
Environmental Rating  
Required Overcurrent Protection  
IEC IP67, IP69K per DIN 40050-9.  
WARNING: Electrical connections must be  
made by qualified personnel in accordance  
with local and national electrical codes and  
regulations.  
Operating Conditions  
–40 °C to +50 °C (–40 °F to +122 °F)  
90% at 50 °C maximum relative humidity (non-condensing)  
Storage  
Overcurrent protection is required to be provided by end product  
application per the supplied table.  
Overcurrent protection may be provided with external fusing or via  
Current Limiting, Class 2 Power Supply.  
Supply wiring leads < 24 AWG shall not be spliced.  
For additional product support, go to http://  
www.bannerengineering.com.  
–40 °C to +70 °C (–40 °F to +158 °F)  
Vibration and Mechanical Shock  
Vibration 10 Hz to 55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6  
Shock 30G 11 ms duration, half sine wave per IEC 60068-2-27  
Certifications  
Supply Wiring (AWG)  
Required Overcurrent Protection (Amps)  
20  
22  
24  
26  
28  
30  
5.0  
3.0  
2.0  
1.0  
0.8  
0.5  
Dimensions  
41.0  
[1.62]  
23.5  
[.93]  
30.0  
[1.18]  
M22 X 1.5  
Wiring Diagram  
Bipolar  
Color Key  
1 = Brown  
Cabled wiring diagrams are shown. Quick disconnect  
(QD) wiring diagrams are functionally identical.  
1
3
2 = White  
3 = Blue  
4 = Black  
5 = Gray  
+
12-30V dc  
2
4
5
Load  
Load  
Not Used  
2
www.bannerengineering.com - Tel: +1-763-544-3164  
P/N 189833 Rev. C  
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade Illuminated Buttons  
Accessories  
Cordsets  
5-Pin Threaded M12/Euro-Style Cordsets—Single Ended  
Model  
Length  
Style  
Dimensions  
Pinout (Female)  
MQDC1-501.5  
MQDC1-506  
MQDC1-515  
0.50 m (1.5 ft)  
1.83 m (6 ft)  
4.57 m (15 ft)  
44 Typ.  
Straight  
M12 x 1  
2
MQDC1-530  
9.14 m (30 ft)  
ø 14.5  
1
4
3
MQDC1-506RA  
MQDC1-515RA  
1.83 m (6 ft)  
4.57 m (15 ft)  
5
32 Typ.  
[1.26"]  
1 = Brown  
2 = White  
3 = Blue  
4 = Black  
5 = Gray  
30 Typ.  
[1.18"]  
Right-Angle  
MQDC1-530RA  
9.14 m (30 ft)  
M12 x 1  
ø 14.5 [0.57"]  
5-Pin Threaded M12/Euro-Style Cordsets—Washdown Stainless Steel  
Model  
Length  
Style  
Dimensions  
Pinout (Female)  
MQDC-WDSS-0506  
MQDC-WDSS-0515  
1.83 m (6 ft)  
4.57 m (15 ft)  
2
1
4
3
Ø15.5 mm  
5
Straight  
1 = Brown  
2 = White  
3 = Blue  
Ø4.8 mm  
MQDC-WDSS-0530  
9.14 m (30 ft)  
43.5 mm  
4 = Black  
5 = Gray  
5-Pin Threaded M12/Euro-Style Cordsets—Washdown, with Shield  
Model  
Length  
Style  
Dimensions  
Pinout (Female)  
MQDCWD-506  
1.83 m (6 ft)  
2
1
4
42 Typ.  
[1.65"]  
3
5
ø 15.0  
[0.57"]  
Straight  
1 = Brown  
2 = White  
3 = Blue  
MQDCWD-530  
9.14 m (30 ft)  
M12 x 1  
4 = Black  
5 = Gray  
P/N 189833 Rev. C  
www.bannerengineering.com - Tel: +1-763-544-3164  
3
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade Illuminated Buttons  
Brackets  
32  
SMB22A  
SMB22FVK  
46  
118  
Right-angle bracket with curved slot  
for versatile orientation  
12-ga. stainless steel  
Mounting hole for 22 mm sensor  
V-clamp, flat bracket and fasteners  
for mounting to pipe or extensions  
Clamp accommodates 28 mm  
diameter tubing or 1 in. square  
extrusions  
C
ø22.5  
41  
A
B
34  
A
22 mm hole for mounting sensor  
46  
Hole size: A = ø 22.5  
Hole center spacing: A to B = 26.0  
Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2  
45  
SMB22RAVK  
SMBAMS22P  
A
C
V-clamp, right-angle bracket and  
fasteners for mounting to pipe or  
extensions  
Clamp accommodates 28 mm  
diameter tubing or 1 in. square  
extrusions  
Flat SMBAMS series bracket with 22  
mm hole for mounting sensors  
Articulation slots for 90+° rotation  
12-ga. (2.6 mm) cold-rolled steel  
46  
A
93  
B
90  
57  
22 mm hole for mounting sensor  
Hole size: A = ø 22.5  
Hole center spacing: A = 26.0, A to B = 13.0  
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5  
Ø A  
45  
SMBAMS22RA  
TC-K30-CL  
Right-angle SMBAMS series bracket  
with 22 mm hole for mounting  
sensors  
Touch cover  
C
53  
B
A
Articulation slots for 90+° rotation  
12-ga. (2.6 mm) cold-rolled steel  
B
48  
Diameter: A = 40.7  
Height: B = 31  
Hole center spacing: A = 26.0, A to B = 13.0  
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5  
All measurements are listed in millimeters, unless noted otherwise.  
Banner Engineering Corp. Limited Warranty  
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.  
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty  
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.  
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE  
OF DEALING OR TRADE USAGE.  
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE  
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER  
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.  
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product  
previously manufactured by Banner Engineering Corp.  
www.bannerengineering.com - Tel: +1-763-544-3164  

相关型号:

K30RBT2FRGHQP

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons
BANNER

K30RBT2FXGHQP

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons
BANNER

K30RBTGGHQ

EZ-LIGHT® Touch K30 Series Illuminated Buttons
BANNER

K30RBTRGHQ

EZ-LIGHT® Touch K30 Series Illuminated Buttons
BANNER

K30RBTXGHQ

EZ-LIGHT® Touch K30 Series Illuminated Buttons
BANNER

K30RLBT2FGGHQP

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons
BANNER

K30RLBT2FRGHQP

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons
BANNER

K30RLBT2FXGHQP

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons
BANNER

K30RLBTGGHQ

EZ-LIGHT® Touch K30 Series Illuminated Buttons
BANNER

K30RLBTRGHQ

EZ-LIGHT® Touch K30 Series Illuminated Buttons
BANNER

K30RLBTXGHQ

EZ-LIGHT® Touch K30 Series Illuminated Buttons
BANNER

K30RNT2FGRCQP

EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Pick-to-Light
BANNER