K30ANTGRF2Q [BANNER]
EZ-LIGHT® Touch K30 Series Illuminated Multipurpose Buttons;
| 型号： | K30ANTGRF2Q |
| 厂家： | 
Banner Engineering |
| 描述： | EZ-LIGHT® Touch K30 Series Illuminated Multipurpose Buttons |
| 文件： | 总4页 (文件大小：317K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
EZ-LIGHT Touch K30 Series Illuminated
Multipurpose Buttons
Datasheet
General purpose multicolor indicator with independent momentary touch button output
•
•
•
•
•
Rugged, cost-effective, and easy-to-install multicolor indicator with touch button
Waterproof IP69K construction for washdown environments
Two independent colors in one unit—Color 2 overrides Color 1
Available with PNP and NPN inputs/outputs, depending on model
Ergonomically designed to eliminate hand, wrist, and arm stresses associated with
repeated switch operation; require no physical force to operate
•
•
Can be actuated with bare hands or in gloves
12 V dc to 30 V dc operation
Models
1
Model
I/O Type
Output
State
Light Color 1
(Power Applied) (Input Active)
Light Color 2
Connection
K30APTXRF2Q
K30APTXGF2Q
K30APTGRF2Q
K30APTRGF2Q
K30ANTXRF2Q
K30ANTXGF2Q
K30ANTGRF2Q
K30ANTRGF2Q
-
-
Red
Green
Red
PNP
Green
Red
-
Integral 4-pin M12/Euro-
style male quick disconnect
(QD)
Green
Red
N.O.
-
Green
Red
NPN
Green
Red
Green
Wiring
NPN (Sinking) Output Models
PNP (Sourcing) Output Models
Wiring Key
1 = Brown
2 = White
3 = Blue
1
1
+
+
12-30V dc
–
4 = Black
12-30V dc
–
3
4
2
3
4
2
Load
Load
C2
C2
Cabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical.
1
Integral QD models only are listed.
•
To order the 4-pin 150 mm (5.9 in) Euro-style PVC pigtail models, replace suffix Q with QP in the model number
(example, K30APTXRF2QP).
•
•
To order the 2 m (6.5 ft) cable models, omit suffix Q from the model number (example, K30APTXRF2).
A model with a QD requires a mating cable (see Cordsets).
Original Document
170456 Rev. E
29 November 2016
170456
®
EZ-LIGHT Touch K30 Series Illuminated Multipurpose Buttons
Specifications
Supply Voltage
Output Response Time
12 V dc to 30 V dc
150 milliseconds On and Off
Supply Current
Power-Up Delay
55 mA max current (exclusive of load)
300 milliseconds
Supply/Output Protection Circuitry
Connections
Protected against reverse polarity and transient voltages
Integral 4-pin M12/Euro-style male quick disconnect (QD); 2 m (6.5 ft)
PVC integral cable; 150 mm (6 in) PVC cable with a 4-pin M12/Euro-style
male quick disconnect (QD)
Output Rating
Maximum Load: 150 mA
ON-state saturation voltage: < 2 V dc at 10 mA; < 2.5 V dc at
150 mA
Construction
Housing: polycarbonate
Translucent dome: polycarbonate
Mounting nut: PBT
OFF-state leakage current: <10 µA at 30 V dc
Mounting
M22 × 1.5 Threaded base, max torque 2.25 N·m (20 in-lbf)
Environmental Rating
Required Overcurrent Protection
IEC IP67, IP69K per DIN 40050-9.
Cabled models also meet IP69K if the cable and cable entrance are
protected from high-pressure spray.
Enclosure Type 4X, 13
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Operating Conditions
Temperature: −40 °C to +50 °C (−40 °F to +122 °F)
Humidity: 90% at +50 °C maximum relative humidity (non-
condensing)
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Storage Temperature
−40 °C to +70 °C (−40 °F to +158 °F)
Vibration and Mechanical Shock
All models meet Mil. Std. 202F requirements method 201A (vibration:
10 Hz to 60 Hz max., double amplitude 0.06 in. maximum
acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half
sine wave.
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Certifications
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 170456 Rev. E
®
EZ-LIGHT Touch K30 Series Illuminated Multipurpose Buttons
Accessories
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
Brackets
SMB22A
SMB22FVK
32
46
118
•
Right-angle bracket with curved slot
for versatile orientation
12-ga. stainless steel
•
V-clamp, flat bracket and fasteners
for mounting to pipe or extensions
C
ø22.5
41
•
•
•
Clamp accommodates 28 mm
diameter tubing or 1 in. square
extrusions
A
B
Mounting hole for 22 mm sensor
34
A
•
22 mm hole for mounting sensor
46
Hole size: A = ø 22.5
Hole center spacing: A to B = 26.0
Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2
45
SMB22RAVK
SMBAMS22P
A
•
•
•
V-clamp, right-angle bracket and
fasteners for mounting to pipe or
extensions
Clamp accommodates 28 mm
diameter tubing or 1 in. square
extrusions
•
Flat SMBAMS series bracket with 22
C
mm hole for mounting sensors
Articulation slots for 90+° rotation
12-ga. (2.6 mm) cold-rolled steel
46
•
•
A
93
B
90
57
22 mm hole for mounting sensor
Hole size: A = ø 22.5
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5
Ø A
SMBAMS22RA
45
TC-K30-CL
•
Right-angle SMBAMS series bracket
with 22 mm hole for mounting
sensors
•
Touch cover
C
53
B
A
•
•
Articulation slots for 90+° rotation
12-ga. (2.6 mm) cold-rolled steel
B
48
Diameter: A = 40.7
Height: B = 31
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5
All measurements are listed in millimeters, unless noted otherwise.
P/N 170456 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
EZ-LIGHT Touch K30 Series Illuminated Multipurpose Buttons
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection
applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval
by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product
specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most
recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明