AZ733-2C-6DAF [AZETTLER]
Power/Signal Relay;型号: | AZ733-2C-6DAF |
厂家: | AMERICAN ZETTLER, INC. |
描述: | Power/Signal Relay |
文件: | 总2页 (文件大小:432K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AZ733
DPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Low cost
• Epoxy sealed version available
• 12 Amp switching — double pole contacts
• Isolation spacing greater than 8mm
• UL Class B insulation system, Class F available
• UL, CUR file E44211
• TÜV file R50129285
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
CONTACTS
1 x 105 at 10 A 240 VAC Res.
Arrangement
DPST (2 Form A)
DPDT (2 Form C)
Operate Time (typical) 8 ms at nominal coil voltage
Ratings
Resistive load:
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Max. switched power: 300 W or 2500 VA
Max. switched current: 12 A
Max. switched voltage: 150* VDC or 380 VAC
Dielectric Strength
5000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms between open contacts
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
3000 Vrms between contact sets
Surge Voltage
Between Contact to
Coil
Rated Load
12 A at 277 VAC Resisitive [2][3]
10kV (1.2 x 50 µs)
10 A at 250 VAC General Use, 100k cycles[1][2][3]
10 A at 30 VDC N.O. Resistive 100k cycles [1]
10 A at 30 VDC N.C. Resistive 50k cycles [1]
10 A at 30 VDC N.O./N.C. Resistive 25k cycles[2][3]
1/4 HP at 240 VAC [1]
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
1/8 HP at 120 VAC [1]
TV-3 at 125 VAC (2 Form A) [1]
Ambient Temperature
Operating
-40°C (-40°F) to 90°C (194°F)
-40°C (-40°F) to 130°C (266°F)
TÜV
5 A at 30 VDC, 250 VAC resistive, 100k cycles
[1][2][3]
Storage
[1] Silver cadmium oxide [2] Silver tin oxide [3] Silver
nickel
Vibration
0.062" DA at 10–55 Hz
10 g
Shock
Material
Silver cadmium oxide, silver tin oxide or silver nickel,
gold plating available
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
COIL
80°C (176°F)
Power
At Pickup Voltage
(typical)
257 mW
Max. Immersion Time 30 seconds
Weight
18 grams
Max. Continuous
Dissipation
1.9 W at 20°C (68°F) ambient
NOTES
Temperature Rise
Temperature
34°C (61°F) at nominal coil voltage
1. All values at 20°C (68°F).
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/15/14
AZ733
RELAY ORDERING DATA
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
Max. Continuous
VDC
Coil
Resistance
Form A
(DPST)
Form C
(DPDT)
VDC
3
2.1
5.7
17 ±10%
AZ733–2A–3D
AZ733–2C–3D
5
6
3.5
4.2
9.4
11.4
17.4
22.8
27.9
45.7
89.0
115.3
170.5
47 ±10%
68 ±10%
AZ733–2A–5D
AZ733–2A–6D
AZ733–2A–9D
AZ733–2A–12D
AZ733–2A–18D
AZ733–2A–24D
AZ733–2A–48D
AZ733–2A–60D
AZ733–2A–110D
AZ733–2C–5D
AZ733–2C–6D
AZ733–2C–9D
AZ733–2C–12D
AZ733–2C–18D
AZ733–2C–24D
AZ733–2C–48D
AZ733–2C–60D
AZ733–2C–110D
9
6.3
160 ±10%
275 ±10%
650 ±10%
1100 ±15%
4170 ±15%
7000 ±15%
22900 ±15%
12
18
24
48
60
110
8.4
12.6
16.8
33.6
42.0
79.3
*Add suffix “E” to “2A” or “2C” for silver tin oxide contacts. Add suffix “B” to “2A” or “2C” for silver nickel contacts. Add suffix”E” for epoxy sealed version.
When suffix “E” is specified for Epoxy Seal, refer to AZ “Relay Technical
Add suffix “F” for Class F insulation system. Add suffix “A” for gold plated contacts.
Notes” on AZ website - Product Resources. Consult factory for other PCB process conditions that may apply.
HARDWARE ORDERING DATA
DESCRIPTION
ORDER NUMBER
DESCRIPTION
ORDER NUMBER
Socket
ST484–U1
Retainer
ST482–2
MECHANICAL DATA
ST482-2
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
5/15/14
相关型号:
AZ733-2C-9DA
Power/Signal Relay, 2 Form C, DPDT, Latched, 17.4VDC (Coil), 12A (Contact), 150VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
©2020 ICPDF网 联系我们和版权申明