AZ733-2A-60DBF [AZETTLER]

Power/Signal Relay;


型号：	AZ733-2A-60DBF
厂家：	AMERICAN ZETTLER, INC.
描述：	Power/Signal Relay 继电器
文件：	总2页 (文件大小：432K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AZ733

DPDT MINIATURE

POWER RELAY

FEATURES

• Dielectric strength 5000 Vrms

• Low cost

• Epoxy sealed version available

• 12 Amp switching — double pole contacts

• Isolation spacing greater than 8mm

• UL Class B insulation system, Class F available

• UL, CUR file E44211

• TÜV file R50129285

GENERAL DATA

Life Expectancy

Mechanical

Electrical

Minimum operations

1 x 10⁷

CONTACTS

1 x 10⁵at 10 A 240 VAC Res.

Arrangement

DPST (2 Form A)

DPDT (2 Form C)

Operate Time (typical) 8 ms at nominal coil voltage

Ratings

Resistive load:

Release Time (typical) 5 ms at nominal coil voltage

(with no coil suppression)

Max. switched power: 300 W or 2500 VA

Max. switched current: 12 A

Max. switched voltage: 150* VDC or 380 VAC

Dielectric Strength

5000 Vrms contact to coil

(at sea level for 1 min.) 1000 Vrms between open contacts

*Note: If switching voltage is greater than 30 VDC, special

precautions must be taken. Please contact the factory.

3000 Vrms between contact sets

Surge Voltage

Between Contact to

Coil

Rated Load

12 A at 277 VAC Resisitive [2][3]

10kV (1.2 x 50 µs)

10 A at 250 VAC General Use, 100k cycles[1][2][3]

10 A at 30 VDC N.O. Resistive 100k cycles [1]

10 A at 30 VDC N.C. Resistive 50k cycles [1]

10 A at 30 VDC N.O./N.C. Resistive 25k cycles[2][3]

¹/4 HP at 240 VAC [1]

Insulation

Resistance

1000 megohms min. at 20°C, 500 VDC,

50% RH

Dropout

Greater than 10% of nominal coil voltage

¹/8 HP at 120 VAC [1]

TV-3 at 125 VAC (2 Form A) [1]

Ambient Temperature

Operating

-40°C (-40°F) to 90°C (194°F)

-40°C (-40°F) to 130°C (266°F)

TÜV

5 A at 30 VDC, 250 VAC resistive, 100k cycles

[1][2][3]

Storage

[1] Silver cadmium oxide [2] Silver tin oxide [3] Silver

nickel

Vibration

0.062" DA at 10–55 Hz

10 g

Shock

Material

Silver cadmium oxide, silver tin oxide or silver nickel,

gold plating available

Enclosure

P.B.T. polyester

Tinned copper alloy, P.C.

270°C (518°F)

5 seconds

Resistance

< 50 milliohms initially

(24 V, 1 A voltage drop method)

Terminals

Max. Solder Temp.

Max. Solder Time

Max. Solvent Temp.

COIL

80°C (176°F)

Power

At Pickup Voltage

(typical)

257 mW

Max. Immersion Time 30 seconds

Weight

18 grams

Max. Continuous

Dissipation

1.9 W at 20°C (68°F) ambient

NOTES

Temperature Rise

Temperature

34°C (61°F) at nominal coil voltage

1. All values at 20°C (68°F).

Max. 130°C (266°F) Class B

Max. 155°C (311°F) Class F

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

5/15/14

AZ733

RELAY ORDERING DATA

COIL SPECIFICATIONS

ORDER NUMBER*

Nominal Coil

VDC

Must Operate

Max. Continuous

VDC

Coil

Resistance

Form A

(DPST)

Form C

(DPDT)

VDC

2.1

5.7

17 ±10%

AZ733–2A–3D

AZ733–2C–3D

3.5

4.2

9.4

11.4

17.4

22.8

27.9

45.7

89.0

115.3

170.5

47 ±10%

68 ±10%

AZ733–2A–5D

AZ733–2A–6D

AZ733–2A–9D

AZ733–2A–12D

AZ733–2A–18D

AZ733–2A–24D

AZ733–2A–48D

AZ733–2A–60D

AZ733–2A–110D

AZ733–2C–5D

AZ733–2C–6D

AZ733–2C–9D

AZ733–2C–12D

AZ733–2C–18D

AZ733–2C–24D

AZ733–2C–48D

AZ733–2C–60D

AZ733–2C–110D

6.3

160 ±10%

275 ±10%

650 ±10%

1100 ±15%

4170 ±15%

7000 ±15%

22900 ±15%

110

8.4

12.6

16.8

33.6

42.0

79.3

*Add suffix “E” to “2A” or “2C” for silver tin oxide contacts. Add suffix “B” to “2A” or “2C” for silver nickel contacts. Add suffix”E” for epoxy sealed version.

When suffix “E” is specified for Epoxy Seal, refer to AZ “Relay Technical

Add suffix “F” for Class F insulation system. Add suffix “A” for gold plated contacts.

Notes” on AZ website - Product Resources. Consult factory for other PCB process conditions that may apply.

HARDWARE ORDERING DATA

DESCRIPTION

ORDER NUMBER

DESCRIPTION

ORDER NUMBER

Socket

ST484–U1

Retainer

ST482–2

MECHANICAL DATA

ST482-2

Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"

5/15/14

相关型号：