009178003001106 [KYOCERA AVX]
SSL - Discrete Wire IDC; SSL - 分立导线IDC
| 型号： | 009178003001106 |
| 厂家： | 
KYOCERA AVX |
| 描述： | SSL - Discrete Wire IDC |
| 文件： | 总5页 (文件大小：236K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SSL - Discrete Wire IDC
Series 9177
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9177 series accepts 14 AWG to 20 AWG wires with an insulation diameter
ranging from 2.75mm to 4.25mm. These dual contact connectors support a
15 amp current rating with two large SMT solder tails per wire to provide
maximum stability on the PCB. Available in 1p-3p configuration, these
connectors can be end stackable for higher pin counts.
APPLICATIONS
FEATURES AND BENEFITS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Connector housing captures the wire insulation for positive strain relief
• Tested to automotive levels on shock, vibration and temperature cycling for
reliability
• Low and high volume assembly tools to match production volumes
• Reduced total applied cost versus solder or crimp processes
• High temperature insulator capable to 260ºC reflow soldering processes
• Application Notes: refer to 201-01-124
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 15 Amp / Contact
• Voltage Rating: 600 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
HOW TO ORDER
00X
00X
X
06
00
9177
Number of Ways
No of
Wire Gauge Size
Insulator Color
Plating
Option
06 = Pure Tin
all over
Prefix
Series
Code Color Application
Code
Accepted
Wire Gauge
14 AWG
Wire
Insulation
Ø 4.25
Code
Details
Ways
0
1
Black
White
Industrial
Lighting
001
002
003
1
2
3
Page 62
Page 63
Page 64
001
012
022
033
16 AWG
18 AWG
20 AWG
Ø 3.50
Ø 3.50
Ø 2.75
Certification: UL File #E320991
61
SSL - Discrete Wire IDC
Series 9177
14-20 AWG 1 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 61.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14 AND 20 GAUGE
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-109.
6. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO PAGE 65.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001 14 Gauge Stranded 1.10 Ø 4.25 max 4.25
012 16 Gauge Stranded 0.82 Ø 3.50 max 3.50
022 18 Gauge Stranded 0.72 Ø 3.50 max 3.50
033 20 Gauge Stranded 0.60 Ø 2.75 max 2.75
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL/BOX
PACK QTY
400
500MM
400MM
4
1600
62
SSL - Discrete Wire IDC
Series 9177
14-20 AWG 2 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 61.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14 AND 20 GAUGE
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-109.
6. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO PAGE 65.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001 14 Gauge Stranded 1.10 Ø 4.25 max 4.25
012 16 Gauge Stranded 0.82 Ø 3.50 max 3.50
022 18 Gauge Stranded 0.72 Ø 3.50 max 3.50
033 20 Gauge Stranded 0.60 Ø 2.75 max 2.75
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL/BOX
PACK QTY
400
500MM
400MM
4
1600
63
SSL - Discrete Wire IDC
Series 9177
14-20 AWG 3 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 61.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 14 AND 20 GAUGE
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-109.
6. FOR PCB SPACE RESTRICTED BY ASSEMBLY TOOLING REFER TO PAGE 65.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001 14 Gauge Stranded 1.10 Ø 4.25 max 4.25
012 16 Gauge Stranded 0.82 Ø 3.50 max 3.50
022 18 Gauge Stranded 0.72 Ø 3.50 max 3.50
033 20 Gauge Stranded 0.60 Ø 2.75 max 2.75
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
REEL/BOX
PACK QTY
400
500MM
400MM
4
1600
64
SSL - Discrete Wire IDC
Series 9177
INSERTION TOOLING – REQUIRES HAND PRESS WITH FLAT ROCK PLATES
1 WAY
2 WAY
3 WAY
HIGH PRODUCTION
MEDIUM PRODUCTION
The assembly tooling restricts the available
space/component heights on the PCB.
For details see below.
Plastic
Max
Insulation Dia
(AWG)
Max
Insulation Dia
(AWG)
No.
Tool
Part Number
No.
Tool
of Ways
of Ways
Part Number
4.25 (14)
3.50 (16-18)
2.75 (20)
4.25 (14)
3.50 (16-18)
2.75 (20)
4.25 (14)
3.50 (16-18)
2.75 (20)
06 9177 7017 01 001
06 9177 7017 02 001
06 9177 7017 03 001
06 9177 7017 01 002
06 9177 7017 02 002
06 9177 7017 03 002
06 9177 7017 01 003
06 9177 7017 02 003
06 9177 7017 03 003
4.25 (14)
3.50 (16-18)
2.75 (20)
4.25 (14)
3.50 (16-18)
2.75 (20)
4.25 (14)
3.50 (16-18)
2.75 (20)
06 9177 7016 01 001
06 9177 7016 02 001
06 9177 7016 03 001
06 9177 7016 01 002
06 9177 7016 02 002
06 9177 7016 03 002
06 9177 7016 01 003
06 9177 7016 02 003
06 9177 7016 03 003
1
2
3
1
2
3
NOTES:
1. ALL DIMENSIONS FOR REFERENCE DIMENSIONS.
2. MAXIMUM COMPONENT HEIGHT 0.80MM IN THIS AREA.
3. MAXIMUM COMPONENT HEIGHT 11.00 MM IN THIS AREA.
4. THE SAME RESTRICTIONS APPLY TO ALL WIRE
INSULATION DIAMETERS.
INSERTION TOOLING – PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING
1 WAY
2 WAY
3 WAY
65
相关型号：
©2020 ICPDF网 联系我们和版权申明