HDSP-H3G3 [AVAGO]
0.36" Single Digit PCB Based LED Display;型号: | HDSP-H3G3 |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | 0.36" Single Digit PCB Based LED Display PC |
文件: | 总8页 (文件大小:301K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HDSP-H3x1/H3x3
0.36" Single Digit PCB Based LED Display
Data Sheet
Description
Features
The HDSP-H3x1/H3x3 is a 0.36 inch high, single-digit display
series. These halogenated devices utilize AllnGaP red, orange,
green and deep red chips. This device is halogenated.
High reliability
Excellent characters appearance
Available in CA and CC
RoHS Compliant
Gray top surface with white diffused segments.
All devices are categorizedfor luminous intensity
and green devicesare categorized for olor Use of similar device
categories yields a uniform display
.
The orange
c
.
.
Table 1 Ordering Information
Red
Green
Orange
Deep Red
Description
HDSP-H3E1
HDSP-H3E3
HDSP-H3G1
HDSP-H3G3
HDSP-H3L1
HDSP-H3L3
HDSP-H3A1
HDSP-H3A3
Common Anode, Right Hand Decimal
Common Cathode, Right Hand Decimal
Figure 1 Package Dimension
Notes:
1. All dimensions are in millimeters.
2. Unless otherwise stated, the tolerance is 0.2ꢀ mm.
Avago Technologies
- 1 -
HDSP-H3x1/H3x3
Data Sheet
Features
Figure 2 Circuit Diagram
Table 2 Absolute Maximum Ratings at TA = 25°C
Parameter
Symbol
Red/Orange/Green/Deep Red
Units
mW
mA
Power Dissipation per segment or Dot Point (DP)
Continuous Forward Current per segment
PD
IF
ꢀ2
20
Peak Forward Current per segment
100
mA
(1/10 Duty Cycle, 0.1m sec pulse width
Derating Linearly from 2ꢀ°C per segment
Reverse Voltage per segment or DP
0.21
mA/°C
VR
TO
TS
Not designed for reverse biasing
Operating Temperature
-
40 to 8ꢀ
°C
°C
Storage Temperature
-40 to 8ꢀ
Wave solder Condition 1.6mm below body
260°C peak for 3 secs max
Table 3 Red Electrical/Optical Characteristics at TA = 25°C
Parameter
Average Luminous Intensity (Digit Average)
Peak Wavelength
Symbol
Min
—
Typ
Max
—
Units
Test Conditions
IF = 10 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
VR = ꢀ V
Iv
λp
1ꢀ
634
62ꢀ
2.0
—
mcd
nm
nm
V
—
—
Dominant Wavelength
λd
—
—
Forward Voltage per segment / DP
VF
—
2.6
100
—
Reverse Current per segment / DPa
IR
—
A
—
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M
—
2:1
IF = 10 mA
a.
Indicates production go-no-go test only. Long term reverse biasing is not recommended.
Avago Technologies
- 2 -
HDSP-H3x1/H3x3
Data Sheet
Features
Table 4 Green Electrical/Optical Characteristics at TA = 25°C
Parameter
Average Luminous Intensity (Digit Average)
Peak Wavelength
Symbol
Min
—
Typ
ꢀ
Max
—
Units
mcd
nm
nm
V
Test Conditions
IF = 10 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
VR = ꢀ V
Iv
λp
—
ꢀ70
ꢀ71
2.0
—
—
Dominant Wavelength
λd
—
—
Forward Voltage per segment / DP
VF
—
2.6
100
—
Reverse Current per segment / DPa
IR
—
A
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M
—
2:1
—
IF = 10 mA
a.
Indicates production go-no-go test only. Long term reverse biasing is not recommended.
Table 5 Orange Electrical/Optical Characteristics at TA = 25°C
Parameter
Average Luminous Intensity (Digit Average)
Peak Wavelength
Symbol
Min
—
Typ
13
Max
—
Units
mcd
nm
nm
V
Test Conditions
IF = 10 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
VR = ꢀ V
Iv
λp
—
610
60ꢀ
2.0
—
—
Dominant Wavelength
λd
—
—
Forward Voltage per segment / DP
VF
—
2.6
100
—
Reverse Current per segment / DPa
IR
—
A
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M
—
2:1
—
IF = 10 mA
a.
Indicates production go-no-go test only. Long term reverse biasing is not recommended.
Table 6 Deep Red Electrical/Optical Characteristics at TA = 25°C
Parameter
Average Luminous Intensity (Digit Average)
Peak Wavelength
Symbol
Min
—
Typ
12
Max
—
Units
mcd
nm
nm
V
Test Conditions
IF = 10 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
ꢀ V
Iv
λp
—
644
63ꢀ
2.0
—
—
Dominant Wavelength
λd
—
—
Forward Voltage per segment / DP
VF
—
2.6
100
—
Reverse Current per segment / DPa
IR
—
A
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M
—
2:1
—
IF = 10 mA
a.
Indicates production go-no-go test only. Long term reverse biasing is not recommended.
Avago Technologies
- 3 -
HDSP-H3x1/H3x3
Data Sheet
Red
Red
Figure 3 Relative Luminous Intensity Vs Forward Current
Figure 4 Forward Voltage Vs Current
Figure 5 Relative Luminous Intensity Vs Wavelength
Avago Technologies
- 4 -
HDSP-H3x1/H3x3
Data Sheet
Green
Green
Figure 6 Relative Luminous Intensity Vs Forward Current
Figure 7 Forward Voltage Vs Current
Figure 8 Relative Luminous Intensity Vs Wavelength
Avago Technologies
- ꢀ -
HDSP-H3x1/H3x3
Data Sheet
Orange
Orange
Figure 9 Relative Luminous Intensity Vs Forward Current
Figure 10 Forward Voltage Vs Current
Figure 11 Relative Luminous Intensity Vs Wavelength
Avago Technologies
- 6 -
HDSP-H3x1/H3x3
Data Sheet
Deep Red
Deep Red
Figure 12 Relative Luminous Intensity Vs Forward Current
Figure 13 Forward Voltage Vs Current
Figure 14 Relative Luminous Intensity Vs Wavelength
Avago Technologies
- 7 -
Packing Tube Specifications
Reference
For further information on soldering LEDs, please refer to Avago Technologies Application Note 1027.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago Technologies and the A logo are trademarks of Avago Technologies in the United
States and other countries. All other brand and product names may be trademarks of their
respective companies.
Data subject to change. Copyright © 201ꢀ Avago Technologies. All Rights Reserved.
pub-00ꢀ311 – December 16, 201ꢀ
相关型号:
©2020 ICPDF网 联系我们和版权申明